Texas Instruments

ADS574KE - 12-Bit 40 kSPS SAR ADC | Texas Instruments

MPN: ADS574KE ✓ چالاک
+5 V Vdss 28-pin PDIP Package Yes Speed
MOQ: 1 |

ADS574KE گشتی

The Texas Instruments ADS574KE is a 12-bit, single-input successive-approximation analog-to-digital converter with a 40 kSPS conversion rate, packaged in a 28-pin PDIP. Its complete sampling ADC architecture includes internal sampling, a reference, a clock, and a microprocessor-compatible parallel interface. The maximum acquisition-and-conversion time is 25 µs, making the device suitable for industrial control, instrumentation, data acquisition, and embedded measurement systems.

An ADC is a mixed-signal semiconductor that converts a continuously varying analog voltage into a numeric code for processing, storage, or transmission. Successive-approximation ADCs repeatedly compare the sampled input with an internal DAC and progressively refine the result. The ADS574KE belongs to the CMOS ADC hierarchy and combines this conversion principle with integrated sampling and digital control, eliminating the external sample-and-hold stage required by many earlier converter designs.

The principal features are 12-bit resolution, one analog input, a 40 kSPS throughput, and operation from a single +5 V supply. Its microprocessor interface and three-state outputs support convenient connection to parallel processors and buses. The datasheet identifies the device as a drop-in replacement for ADC574 models in most applications, while its internal sampling and CMOS implementation provide lower power consumption than the legacy ADC574 family.

Internally, the ADS574 uses a capacitor-based DAC array, or CDAC, to perform successive-approximation conversion. This architecture provides a practical balance between conversion speed, component count, and microprocessor compatibility. Because the sampling network, reference, clock, and interface are integrated, the circuit does not normally require a separate external sample-and-hold amplifier. The 28-bit package arrangement provides a through-hole footprint suitable for conventional PCB assembly and prototype instrumentation.

Typical uses include industrial process-control loops, sensor signal acquisition, laboratory measurement equipment, digital voltmeter and panel-meter designs, and embedded systems that require a parallel ADC rather than a serial interface. The 40 kSPS rate accommodates general-purpose analog monitoring while the 12-bit resolution provides 4,096 discrete codes for the ideal 12-bit transfer function.

When laying out the circuit, preserve the analog signal path, provide the decoupling and reference arrangements shown in the manufacturer application guidance, and route the parallel digital outputs away from sensitive analog inputs. Check signal settling against the 25 µs maximum acquisition-and-conversion time rather than assuming the nominal sampling rate alone guarantees complete conversion.

This page combines the essential electrical specifications, application guidance, package information, design checks, and drop-in replacement status for the ADS574KE. It is intended to help engineers evaluate the converter, plan the PCB, and identify a documented replacement without relying on generic ADC selection advice.

جێگرەوەکانی جێگۆڕکێ بۆ ADS574KE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS574KE (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە RoHS Status, Package, Supply Voltage, Mounting Type, Resolution.

Texas Instruments
RoHS Status: Compliant
Package: 28-pin PDIP through-hole
Supply Voltage: +5 V (single supply)
بەراوردکردن لەگەڵ ADS574KE →
Texas Instruments
RoHS Status: Compliant
بەراوردکردن لەگەڵ ADS574KE →
Texas Instruments
RoHS Status: Compliant (per distributor product listing)
Package: 28-pin plastic DIP (through-hole)
Supply Voltage: 5 V
بەراوردکردن لەگەڵ ADS574KE →
Texas Instruments
RoHS Status: Compliant
Resolution: 12 bit
بەراوردکردن لەگەڵ ADS574KE →
Texas Instruments
RoHS Status: Compliant (G4 / Pb-free green finish)
Resolution: 12 bits
بەراوردکردن لەگەڵ ADS574KE →

ADS574KPG4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 28-pin PDIP
12 bits · 1 (single-ended) · SAR (Successive Approximation) with capacitive DAC · 40 kS/s · 25 microseconds (max) · Parallel (12-bit) microprocessor-compatible · 28-DIP (0.600 in / 15.24 mm) · 0 degrees C to +70 degrees C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADS574KE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

ADC Resolution 12 bit
Input Channels 1 analog input
Conversion Architecture Successive approximation (SAR)
ڕێژەی نموونەگرتن 40 kSPS
Maximum Acquisition and Conversion Time 25 µs
ڤۆڵتیەی دابینکردن +5 V
Internal Sampling Yes
Internal Reference Yes
Internal Clock Yes
جۆری ڕووکار Microprocessor-compatible parallel
Output State 3-state
Internal DAC Architecture Capacitor array (CDAC)
Process Technology Low-power CMOS
پاکێج 28-pin PDIP
جۆری دامەزراندن Through-hole
Temperature Grade Commercial
Package Shipping Form Tube

ڕێنمایی ڕێکخستنی پینی ADS574KE tube

ڕێکخستنی پین بۆ ADS574KE (پاکێجی tube). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی tube بۆ ADS574KE

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS574KE.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS574KE گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Control, Digital Panel Meters, Laboratory Instrumentation, Sensor Signal Acquisition, Data Acquisition Systems, Embedded Control Systems.

🏭

Industrial Process Control

The ADS574KE is appropriate for acquiring a slow or moderate-speed process variable on a 5 V industrial controller. Its 12-bit resolution provides 4,096 ideal code levels, while the 40 kSPS rating and 25 µs maximum acquisition-and-conversion time support repeated measurements without an external sample-and-hold stage. The parallel interface can reduce firmware complexity by transferring each conversion result directly through processor data lines. Source impedance, input filtering, isolation boundaries, and reference grounding remain important when the sensor is physically separated from the controller.

📺

Digital Panel Meters

A digital panel meter can use the ADS574KE to digitize a scaled analog input while retaining the accuracy and conversion speed expected from a general-purpose measurement channel. The 12-bit converter, 40 kSPS maximum sampling rate, and integrated sampling network simplify the analog front end. Its three-state parallel outputs permit bus-oriented connection to a display controller, while the 25 µs acquisition-and-conversion limit helps the host establish a predictable measurement-update interval.

🔧

Laboratory Instrumentation

The ADS574KE can serve as the acquisition converter in a bench instrument that must accept an analog measurement and present it through a parallel microprocessor interface. The 12-bit resolution provides useful measurement granularity, while the 40 kSPS rate is adequate for many temperature, pressure, level, and potentiometer channels. The integrated reference, clock, and sampling path reduce external components, but the input buffer must still provide low noise, correct scaling, and adequate settling before each conversion.

🧩

Sensor Signal Acquisition

For resistive, bridge-derived, or buffered sensor signals, the ADS574KE provides a compact 12-bit sampling ADC with a 40 kSPS maximum rate. Internal sampling eliminates the external sample-and-hold stage required in many earlier converter implementations, and the 25 µs maximum acquisition-and-conversion time defines the wait required for a new measurement. Use the manufacturer input-conditioning guidance to control source impedance and preserve signal accuracy at the required conversion rate.

🖥️

Data Acquisition Systems

The ADS574KE is well matched to a parallel-bus data-acquisition card built around a 5 V microprocessor. It converts one analog channel at 12-bit resolution and up to 40 kSPS, while its three-state outputs support orderly connection to a wider data bus. The integrated CDAC, clock, reference, and sampling circuit simplify the converter section, although analog isolation, input protection, and signal conditioning may be needed when the source is remote or industrial.

⚡

Embedded Control Systems

An embedded controller can use the ADS574KE for feedback measurement, threshold detection, or status monitoring without relying on a low-speed serial ADC interface. The 40 kSPS sampling capability is substantially faster than the 25 µs maximum conversion interval implied by the converter timing, while 12-bit resolution supports proportional control and diagnostic decisions. The single +5 V supply and through-hole 28-pin PDIP package also suit prototype boards and legacy-style control hardware.

What are the key specifications of ADS574KE that engineers should know?
The ADS574KE is a 12-bit, single-input SAR ADC that converts at 40 kSPS and operates from a single +5 V supply. It includes internal sampling, reference, clock, and a microprocessor-compatible parallel interface, with a maximum acquisition-and-conversion time of 25 µs. According to the Texas Instruments ADS574 datasheet, the device uses a capacitor-array DAC and CMOS technology, and it is offered in a 28-pin PDIP package.
What is the operating voltage of ADS574KE?
The ADS574KE operates from a single +5 V supply. This makes it suitable for microprocessor-based systems that already use a 5 V analog and logic rail. According to the Texas Instruments ADS574 datasheet, the integrated reference, clock, sampling network, and processor interface support a complete converter function without requiring the external sample-and-hold stage used in many earlier ADC designs.
What is the conversion speed of ADS574KE?
The ADS574KE has a maximum sampling rate of 40 kSPS, and the Texas Instruments ADS574 datasheet states a maximum acquisition-and-conversion time of 25 µs. These figures make it appropriate for general-purpose process monitoring, panel-meter measurements, and embedded sensor acquisition. Designers should still allow the source impedance and analog network to settle before initiating a conversion.
Where can I download the ADS574KE datasheet PDF?
The ADS574KE manufacturer datasheet is available from Texas Instruments through the ADS574 PDF linked on this product page. The document describes the 12-bit SAR architecture, internal sampling, CDAC implementation, +5 V operation, microprocessor interface, electrical characteristics, and application information. Use the manufacturer PDF for authoritative pin assignments, timing values, and the recommended reference and decoupling circuit.
Where can I find the ADS574KE pinout?
The ADS574KE uses a 28-pin PDIP package, and its complete pin assignment is shown in the pin-description table of the Texas Instruments ADS574 datasheet. Use that table when assigning analog inputs, supply pins, reference connections, control signals, and the parallel digital output bus. The through-hole package requires a 28-pin PCB footprint, and unused output positions should be handled according to the manufacturer logic recommendations.
Is ADS574KE suitable for industrial sensor acquisition?
The ADS574KE is suitable for many industrial sensor-acquisition circuits because it combines 12-bit resolution, a 40 kSPS conversion rate, internal sampling, and a 25 µs maximum acquisition-and-conversion time. The Texas Instruments ADS574 datasheet specifically emphasizes guaranteed AC and DC performance. Its parallel interface can connect directly to suitable microprocessor control and data lines, reducing external interface complexity.
What can replace the ADS574KE?
A direct replacement should preserve the 28-pin PDIP footprint, parallel pinout, 12-bit resolution, supply arrangement, and timing behavior. The ADS574 family also serves as a replacement for ADC574 models in most applications, as stated by Texas Instruments. Before accepting another converter, compare reference voltage, input range, acquisition time, output coding, and acquisition settling rather than relying on resolution alone.
Is ADS574KE the same as ADS774KU?
The ADS574KE and ADS774KU are related 12-bit, microprocessor-compatible sampling ADC families, but they should not be treated as automatically interchangeable. ADS574KE is specified at 40 kSPS, while the comparison information for ADS774KU does not establish an equal conversion rate. According to the Texas Instruments ADS574 datasheet, ADS574 also replaces ADC574 models in most applications, making verified legacy-family matching the safer replacement path.
What is the best Sipex equivalent for ADS574KE?
A Sipex equivalent is identified in the available cross-reference listing, but that listing does not expose a complete manufacturer part number or a verified 28-pin PDIP pin mapping. Therefore, ADS574KE cannot be replaced safely from that record alone. Request the exact Sipex MPN and its datasheet, then confirm the 12-bit code format, reference, supply, acquisition timing, and all 28 physical connections before approving a substitution.
Where to buy ADS574KE online?
Use the Request a Quote form on this page to ask for ADS574KE availability, current lead time, and order handling. The part is identified as a Texas Instruments 12-bit, single-input SAR ADC in a 28-pin PDIP package, with current catalog listings shown under both the Texas Instruments and Rochester Electronics organizations. A quotation request allows the exact manufacturer, package form, and tube packaging requirement to be confirmed together.
What is the price of ADS574KE?
Current commercial pricing for ADS574KE is provided through the Request a Quote form on this page. The converter is cataloged as a 12-bit, single-input, 40 kSPS SAR ADC in a 28-pin PDIP package. Request a quotation for the exact ADS574KE ordering code and quantity so that current channel pricing, tube packaging, and current lead time can be confirmed without relying on a stale list price.
What is the lead time for ADS574KE?
The current ADS574KE lead time should be confirmed through the Request a Quote form on this page because lead time can vary with manufacturer inventory, order quantity, and packaging. The device is listed in a 28-pin PDIP package and is shipped in tube form. Including the required quantity in the request allows the supplier to confirm production availability, allocation, and the expected delivery schedule for the exact ADS574KE code.
Is ADS574KE in stock?
Use the Request a Quote form on this page for the current ADS574KE stock position. The product is a 12-bit, 40 kSPS, single-input SAR ADC in a 28-pin PDIP package, and catalog listings identify both Texas Instruments and Rochester Electronics as sources. Stock should be checked for the exact MPN and tube packaging quantity because available inventory can change after this page is rendered.
When should I choose ADS574KE over a generic ADC?
Choose ADS574KE when the design needs a 12-bit, 40 kSPS converter with integrated sampling and a parallel microprocessor interface rather than a generic serial ADC. The Texas Instruments ADS574 datasheet states that the internal sampling arrangement can eliminate an external sample-and-hold stage in most applications, and the complete converter supports operation from a single +5 V supply. It is especially suitable for industrial and instrumentation systems using parallel bus architecture.
Is ADS574KE suitable for a 5 V microprocessor measurement system?
The ADS574KE is a natural fit for a 5 V microprocessor measurement system because it operates from a single +5 V supply and provides a microprocessor-compatible parallel interface. Its 12-bit resolution produces 4,096 ideal code levels, while the 40 kSPS rate and 25 µs maximum acquisition-and-conversion time support moderate-speed acquisition. The host processor must match the converter's output coding and control timing shown in the manufacturer datasheet.

داتای سەرچاوەی ئەندازیاری بۆ ADS574KE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADS574KE when the system needs a 12-bit, single-input, parallel-interface ADC with a 40 kSPS conversion rate, a 25 µs maximum acquisition-and-conversion time, and operation from a single +5 V supply. It is a strong fit for industrial controllers, laboratory instruments, panel meters, and embedded data-acquisition systems that benefit from internal sampling and a parallel bus. Choose ADS574KP when the same electrical configuration and 28-pin PDIP footprint are required across a -40 °C to +85 °C operating range. Treat ADC574 and other legacy-family devices as candidates only after checking the complete pin and timing maps; the manufacturer states that ADS574 replaces ADC574 models in most applications, but unusual interface requirements still need verification. No other documented same-package drop-in could be confirmed with a complete MPN, package, and parameter match, so functional alternatives should not be introduced as direct replacements without engineering review.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADS574KP
ADC Resolution 12 bit 12 bit
Input Channels 1 analog input 1 analog input
Conversion Architecture Successive approximation (SAR) Successive approximation (SAR)
Sampling Rate 40 kSPS 40 kSPS
Maximum Acquisition and Conversion Time 25 µs 25 µs
Supply Voltage +5 V +5 V
Package 28-pin PDIP 28-pin PDIP
Brand Texas Instruments Texas Instruments
Temperature Grade Commercial -40 °C to +85 °C
Output Interface Microprocessor-compatible parallel, 3-state outputs Microprocessor-compatible parallel, 3-state outputs

جیاکەرەوە سەرەکییەکان

  • Internal sampling can replace an external sample-and-hold stage (بەراورد بەADC574)
  • Complete 12-bit converter function in one package (بەراورد بەADS574KP)
  • Commercial and extended-temperature ordering options (بەراورد بەADS574KE)

تێبینییەکانی دیزاین

Use the analog input network and reference arrangement shown in the Texas Instruments ADS574 datasheet, and account for source impedance and the 25 µs maximum acquisition-and-conversion time. The internal sampling network does not remove the need for the source to settle before conversion. Keep the analog input route short, place filtering close to the converter, and avoid routing high-current digital clock or bus traces beneath the analog input.

Follow the manufacturer's 28-pin PDIP footprint and pin-orientation convention exactly. Separate the analog and digital ground-current paths where the datasheet layout permits, place supply bypass capacitors at the device pins, and keep the parallel output traces away from the reference and analog input. The three-state outputs can share a processor data bus, but output enable and bus contention timing must be controlled by the host firmware.

Do not select a replacement solely because it is labeled 12-bit and parallel. Confirm the physical 28-pin PDIP pinout, supply voltage, reference arrangement, input range, output coding, conversion timing, and three-state output behavior. ADS574 replaces ADC574 models in most applications according to the manufacturer datasheet, but unusual input ranges, clocking arrangements, or timing-critical systems still require a complete timing and logic review.

Operate the converter from the specified single +5 V supply and use the manufacturer's recommended decoupling arrangement. The internal reference and clock simplify the power tree, but supply bypassing remains important because the CDAC and sampling network must operate during each conversion. Keep the analog supply distribution compact and prevent noisy digital return current from passing through the converter's analog ground region.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ADS574 datasheet and catalog records do not state the requested environmental or material-compliance statuses. AEC-Q100 is not applicable because this is a commercial-grade analog-to-digital converter rather than an automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS574KE datasheet ADS574KE datasheet pdf ADS574KE pinout ADS574KE specifications ADS574KE equivalent ADS574KE replacement ADS574KE cross reference ADS574KE vs ADS774KU ADS574KE 28-pin PDIP ADS574KE 12-bit 40 kSPS ADC ADS574KE industrial sensor acquisition ADS574KE price

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS574KE ADS574KP ADS774KU ADC574 analog-to-digital converter ADC successive-approximation ADC SAR single-input ADC microprocessor-compatible parallel interface capacitor array DAC CDAC CMOS technology internal sampling internal reference internal clock 40 kSPS 12-bit resolution 25 µs conversion time +5 V supply three-state outputs 28-pin PDIP through-hole package
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ