ADS774JE - 12-Bit 125 kSPS SAR ADC | Texas Instruments
MPN: ADS774JE ✓ چالاکADS774JE گشتی
A successive-approximation ADC, or SAR ADC, compares the sampled input voltage against a capacitor-based internal DAC and resolves each successive bit until a 12-bit result is available. The ADS774 belongs to the ADC family within the broader signal-chain and data-converter hierarchy. Its microprocessor-compatible interface and integrated reference make it suitable for industrial data acquisition, instrumentation, embedded measurement, and control systems that require deterministic parallel digital output rather than a serial protocol.
The converter uses a low-power CMOS implementation with a CDAC array and internal sample-and-hold function. Its 12-bit resolution provides 4096 digital codes across the selected input range. The 125 kSPS sampling capability supports acquisition of rapidly changing analog signals, while the maximum conversion time of 8.5 microseconds defines the rate at which the converter can produce new results. The single +5 V supply architecture simplifies system power design compared with converters requiring multiple rails.
The ADS774 family was designed as a replacement for ADC574, ADC674, and ADC774 devices in most applications. Important benefits of this transition include the internal sampling function, lower power consumption, and operation from a single +5 V supply. The ADS774JE is the commercial-grade, 28-pin PDIP ordering option identified by the JE suffix, and the component listing identifies its delivery format as tube.
Typical uses include industrial process-control inputs, laboratory measurement equipment, digital panel meters, instrumentation amplifiers, sensor interfaces, and embedded acquisition systems. The parallel output can connect directly to suitable microprocessor or programmable-logic input structures when timing, bus direction, and logic levels are designed correctly. For multiplexed or high-impedance sensors, front-end conditioning and acquisition timing remain important engineering considerations.
The principal design task is ensuring that the input remains within the converter's specified analog range and that the sampling interval accommodates the source impedance and acquisition time. Keep input and reference paths short, provide the capacitance required by the manufacturer recommendations, and route digital output transitions away from sensitive analog nodes. Confirm package pin assignments and timing requirements against the manufacturer datasheet before finalizing a PCB or firmware interface.
This page organizes the core electrical characteristics, verified manufacturer resources, family alternatives, interface guidance, and design considerations for engineers evaluating the ADS774JE. It is intended to support design decisions without replacing the complete manufacturer datasheet, particularly for pin-level wiring, absolute maximum ratings, timing margins, and legacy-converter migration decisions.
جێگرەوەکانی جێگۆڕکێ بۆ ADS774JE — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS774JE (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Architecture, Supply Voltage, Mounting Type, Package, Clock.
ADS774JU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS774KE
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS774JP
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS774JEG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADC574
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADC674
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADC774
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS774JE زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | 12-bit successive approximation ADC |
| Architecture | SAR ADC with CDAC array |
| وردی | 12 bit |
| Number of Input Channels | 1 channel |
| Maximum Sampling Rate | 125 kSPS |
| Maximum Conversion Time | 8.5 us over temperature |
| ڤۆڵتیەی دابینکردن | +5 V |
| Output Interface | 12-bit microprocessor-compatible parallel output |
| Internal DAC | Capacitor array (CDAC) |
| Sample-and-Hold | Internal |
| Reference | Internal |
| Clock | Internal |
| پاکێج | 28-pin PDIP |
| جۆری دامەزراندن | Through-hole |
| Temperature Grade | Commercial |
| Delivery Format | Tube |
ڕێنمایی ڕێکخستنی پینی ADS774JE 28-pin pdip
ڕێکخستنی پین بۆ ADS774JE (پاکێجی 28-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS774JE.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS774JE گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Digital Panel Meter, Laboratory Instrumentation, Embedded Sensor Interface, Data-Acquisition Control Loop, Legacy Analog Interface Upgrade.
Industrial Process Measurement
The ADS774JE fits single-channel process instrumentation that requires 12-bit measurement resolution and acquisition rates up to 125 kSPS. Its internal sample-and-hold, reference, clock, and CDAC reduce the support circuitry needed around the converter. The device can sit behind a conditioned transducer signal in a temperature, pressure, or level instrument, while the parallel output provides a direct path to a microprocessor. Because the analog front end determines accuracy, design the amplifier, input filtering, grounding, and acquisition timing around the manufacturer's input specifications.
پێشنیارکراو
Digital Panel Meter
A digital panel meter can use the ADS774JE when it needs a rapid, deterministic 12-bit conversion rather than a slow display-oriented ADC. The 125 kSPS capability permits averaging or filtering of a changing sensor signal, and the integrated sampling and reference blocks simplify the measurement channel. Parallel output works well with a small embedded controller that can perform calibration, display formatting, and fault monitoring. Stable reference behavior, input settling, and PCB cleanliness remain central to repeatable readings.
پێشنیارکراو
Laboratory Instrumentation
The ADS774JE is appropriate for bench instruments that sample a conditioned analog waveform or measurement channel at up to 125 kSPS. Its 12-bit resolution and maximum 8.5 us conversion time support time-based acquisition, while the microprocessor-compatible interface supports direct parallel transfer into a controller or capture logic. For laboratory accuracy, use a quiet reference arrangement, separate analog and return paths, and ensure the source impedance permits complete settling during the internal sampling interval.
پێشنیارکراو
Embedded Sensor Interface
The ADS774JE can digitize a conditioned sensor output when the system values a single 12-bit SAR channel with a parallel interface. Its integrated sample-and-hold, voltage reference, clock, and CDAC support a compact analog front end, while 125 kSPS allows the firmware to sample, filter, or monitor a changing signal. The interface design must account for output timing, acquisition delay, and source settling. Confirm the complete electrical limits and pin behavior in the manufacturer datasheet before using the converter as a direct sensor ADC.
پێشنیارکراو
Data-Acquisition Control Loop
The ADS774JE suits control and monitoring loops requiring a new 12-bit result every 8.5 us or less at maximum conversion speed. A controller can read the parallel outputs, apply filtering or calibration, and update a supervisory variable without relying on a serial-converter protocol. The single +5 V supply simplifies power partitioning, and the internal reference supports a more compact implementation than a converter requiring several external support blocks. Firmware must observe conversion timing and identify valid data before driving the output bus.
پێشنیارکراو
Legacy Analog Interface Upgrade
The ADS774JE provides a modern CMOS alternative for boards built around ADC574, ADC674, or ADC774 converters. Texas Instruments identifies the ADS774 as a replacement in most applications and highlights internal sampling, lower power consumption, and single-+5 V operation as improvements. Migration is not automatic: compare analog input ranges, acquisition timing, output logic levels, conversion timing, and every physical pin. A transition to the ADS774 can simplify the power supply while preserving a familiar microprocessor-oriented conversion architecture.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS774JE — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS774JU | ADS774KE | ADS774JP | ADC574 | ADC674 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Package | 28-pin PDIP | 28-pin PDIP - same package | 28-pin PDIP - same package | 28-pin PDIP - same package | 28-pin PDIP - legacy package | 28-pin PDIP - legacy package |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Converter Architecture | SAR ADC | SAR ADC | SAR ADC | SAR ADC | Legacy ADC | Legacy ADC |
جیاکەرەوە سەرەکییەکان
- Integrated acquisition and reference functions (بەراورد بەADC574)
- Higher listed sampling performance than the KE and JP family options (بەراورد بەADS774KE)
- Commercial-grade 28-pin PDIP configuration (بەراورد بەADS774JP)
تێبینییەکانی دیزاین
Do not treat family membership as proof of unconditional drop-in operation. The ADS774 datasheet identifies ADC574, ADC674, and ADC774 as replacement targets in most applications, but a board migration still requires comparison of analog input range, conversion timing, output coding, logic levels, power sequencing, and pin functions. Validate the complete ADS774JE pin configuration against the manufacturer datasheet before connecting it to an existing legacy PCB.
Keep the analog input, reference return, and converter ground paths compact and free from digital switching currents. Place input filtering and any external conditioning components close to the corresponding converter pins. Route the 12-bit parallel output on a controlled impedance or short point-to-point path where appropriate, and keep switching-node copper away from the analog input and reference components to minimize conversion-related error.
Use the manufacturer's acquisition-time and input-capacitance guidance to establish whether the source can settle during the internal sampling interval. A high-impedance sensor or long cable can require an input buffer and an explicit charge reservoir capacitor. Verify the source impedance, settling behavior, reference decoupling, and output timing at the intended sampling rate rather than relying on nominal 125 kSPS performance alone.
زانیاری پابەندبوون
The commercial temperature grade and 28-pin PDIP package are identified for ADS774JE. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product records.