ADS774JU/1K - 12-Bit 117 kSPS SAR ADC | Texas Instruments
MPN: ADS774JU/1K ✓ چالاکADS774JU/1K گشتی
An analog-to-digital converter converts a continuously varying analog voltage into a digital code suitable for processing by a microprocessor, microcontroller, or control system. The ADS774 belongs to the SAR ADC hierarchy, where a successive-approximation internal capacitor array samples the input and compares it against a reference during successive conversion cycles. Unlike a comparator-only flash ADC, this SAR architecture combines useful resolution with compact integration and relatively low power consumption.
The ADS774's integrated sampling function can eliminate the external sample-and-hold circuit required in many older ADC designs. Its microprocessor-compatible interface and tri-state outputs support practical acquisition systems, while the internal scaling resistors allow several input ranges without requiring a separate external attenuator for every range. These features make the converter useful in industrial measurement, instrumentation, process control, and data-acquisition equipment.
The converter uses a CDAC implemented in low-power CMOS technology and supports a 12-bit conversion result. According to the Texas Instruments ADS774 datasheet, the fast acquisition and conversion capability is 8.5 microseconds maximum over temperature. Maximum power dissipation is 120 mW, and operation from a single +5 V supply simplifies system-level power planning compared with bipolar converter implementations.
Typical applications include multichannel analog measurement using multiplexed external circuits, digital panel instruments, temperature and process sensor acquisition, laboratory measurement equipment, and embedded industrial controls. The ADS774 is also documented as a replacement for ADC574, ADC674, and ADC774 designs in most applications, although engineers should verify pin functions, logic levels, timing, and input ranges before modifying an existing board.
When designing around the ADS774, begin with the manufacturer's pin-description table and application information for the exact package. Confirm the selected input range, grounding strategy, reference behavior, acquisition timing, and microprocessor interface timing. Account for input-source impedance and conversion time rather than treating the 8.5-microsecond maximum as an unconditional system settling time.
This page combines the manufacturer datasheet details, package and ordering information, drop-in candidates, comparative specifications, and practical implementation guidance to support faster component selection and PCB-level integration of the ADS774JU/1K.
جێگرەوەکانی جێگۆڕکێ بۆ ADS774JU/1K — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS774JU/1K (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage, Architecture, Mounting Type, Output Interface.
ADS774JU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS774KU
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS774HIBDW
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS774JU/1K زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 12 bit |
| ڕێژەی نموونەگرتن | 117 kSPS |
| Analog Input Channels | 1 channel |
| Conversion Architecture | Successive approximation (SAR) |
| Converter Type | Sampling CMOS ADC |
| ڤۆڵتیەی دابینکردن | +5 V |
| Maximum Power Consumption | 120 mW |
| Maximum Acquisition and Conversion Time | 8.5 us over temperature |
| Input Range 1 | 0 V to 10 V |
| Input Range 2 | 0 V to 20 V |
| Input Range 3 | -5 V to +5 V |
| Input Range 4 | -10 V to +10 V |
| Internal Scaling Resistors | Included |
| Internal Clock | Included |
| Internal Reference | Included |
| Microprocessor Interface | Included |
| Output Driver | Tri-state output |
| External Sample-and-Hold Requirement | Eliminated in most applications |
| پاکێج | 28-pin SOIC |
| Temperature Grade | Industrial |
ڕێنمایی ڕێکخستنی پینی ADS774JU/1K 28-pin soic
ڕێکخستنی پین بۆ ADS774JU/1K (پاکێجی 28-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS774JU/1K.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS774JU/1K گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Digital Panel Instrument, Data Acquisition System, Sensor Signal Conditioning, Programmable Control Equipment, Legacy ADC Board Upgrade.
Industrial Process Measurement
The ADS774JU/1K is suitable for acquiring process variables such as pressure, temperature, level, or flow after conditioning them into the converter's supported input range. Its 12-bit resolution provides 4096 code levels, while the 117 kSPS maximum conversion rate supports responsive measurements without the complexity of a discrete sample-and-hold circuit. The integrated scaling resistors, reference, clock, and microprocessor interface reduce the number of external components. For industrial installations, provide suitable input protection, route analog and digital grounds carefully, and verify that the selected 0–10 V, 0–20 V, or bipolar range matches the transmitter output.
پێشنیارکراو
Digital Panel Instrument
The ADS774JU/1K can form the measurement core of a digital panel meter or laboratory instrument because it combines a complete sampling converter with a microprocessor-compatible interface. A 12-bit result supports 4096 discrete levels, and the 8.5 microsecond maximum acquisition-and-conversion time allows measurements to be repeated efficiently. The 28-pin SOIC package is suitable for conventional through-hole board assembly. Design the analog input conditioning for the selected range, allow the source impedance to settle correctly, and confirm tri-state interface behavior when the converter shares a processor data bus.
پێشنیارکراو
Data Acquisition System
The ADS774JU/1K is appropriate for medium-speed data acquisition systems that need a complete, processor-facing ADC rather than a bare converter. Its 117 kSPS conversion capability and integrated sampling function simplify channel conditioning, while the single +5 V supply and 120 mW maximum power suit compact embedded equipment. For multiplexed systems, switch settling time must be included in the overall acquisition interval, and the source impedance should remain within the converter's acquisition requirements. The ADS774 family's internal scaling resistors also help standardize input stages across 0–10 V, 0–20 V, and bipolar measurements.
پێشنیارکراو
Sensor Signal Conditioning
The ADS774JU/1K can digitize conditioned outputs from thermistors, RTDs, bridge amplifiers, potentiometers, and other analog sensors. A 12-bit SAR converter provides 4096 theoretical output codes, allowing the system to resolve incremental sensor changes after amplification and filtering. Its integrated sampling capacitor array and internal clock reduce the external component count compared with older discrete sampling systems. The analog front end should include low-noise amplification and appropriate anti-alias filtering, while the software should account for the conversion time of no more than 8.5 microseconds and any required input-source settling interval.
پێشنیارکراو
Programmable Control Equipment
The ADS774JU/1K is useful in programmable controllers that monitor analog feedback while a microprocessor manages setpoints, alarms, and operator commands. The microprocessor-compatible interface, tri-state outputs, and single +5 V operation simplify integration with legacy parallel-bus control hardware. The 117 kSPS sampling rate is adequate for many supervisory and supervisory-control tasks, while the 8.5 microsecond maximum conversion time supports timely loop updates. Before implementation, check read-cycle timing, bus contention, input range configuration, and whether the measured variable requires filtering or isolation for the installed environment.
پێشنیارکراو
Legacy ADC Board Upgrade
The ADS774JU/1K can support modernization of equipment built around ADC574, ADC674, or ADC774 interfaces. The Texas Instruments ADS774 datasheet identifies the ADS774 as a drop-in replacement in most applications while adding internal sampling, lower power consumption, and single +5 V operation. The 28-pin SOIC option can assist board reuse when the original design used a compatible SOIC footprint. Migration still requires a complete pin-by-pin check, including input range, logic levels, timing, reference behavior, and power sequencing, before the production schematic is approved.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS774JU/1K — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS774JU | ADS774KU | ADS774HIBDW |
|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 117 kSPS | 117 kSPS | 125 kSPS | 117 kSPS |
جیاکەرەوە سەرەکییەکان
- Matches the base ADS774JU conversion performance (بەراورد بەADS774JU)
- Lower sampling rate than the ADS774KU option (بەراورد بەADS774KU)
- Equivalent listed core performance to ADS774HIBDW (بەراورد بەADS774HIBDW)
- Complete integrated sampling converter (بەراورد بەADS774KU)
تێبینییەکانی دیزاین
Verify the exact ADS774JU/1K pin assignments in the manufacturer pin-description table before laying out the PCB. The package is a 28-pin SOIC, but input-range selection, reference, interface, control, and power pins must be assigned exactly as specified. Do not infer a complete pinout from a generic ADC schematic, and check the device marking to ensure the intended ADS774JU ordering configuration has been selected.
Treat the analog input as a settling network rather than a direct digital connection. Keep the input trace short, place associated filtering or protection components close to the device, and confirm that the source impedance permits full 12-bit acquisition. The 8.5 microsecond maximum acquisition-and-conversion figure is the converter timing limit; multiplexer settling, amplifier recovery, and input filtering must also fit within the system sampling interval.
Separate sensitive analog-input routing from microprocessor data and control lines, and provide a direct, low-impedance +5 V connection with local high-frequency bypass. Place the bypass capacitor at the supply pins and keep the return path continuous through the device ground pins. Ground the analog and digital sections according to the manufacturer reference layout, avoiding shared high-current return paths beneath the converter.
The listed maximum power consumption is 120 mW, but actual dissipation depends on supply voltage, conversion activity, and the selected operating conditions. Use the manufacturer electrical-characteristics table for design-limit calculations and include power-supply headroom for the analog input range and reference circuitry. For battery-powered equipment, verify the conversion duty cycle and interface idle current rather than relying only on the maximum-power figure.
زانیاری پابەندبوون
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration appears in the product records used for this page.