ADS7854IPW - Dual 14-Bit 1-MSPS SAR ADC | Texas Instruments
MPN: ADS7854IPW ✓ 啟用中ADS7854IPW 概覽
A SAR ADC is a successive-approximation register analog-to-digital converter. It compares the input voltage against a DAC-derived reference through a binary search process, producing a digital code after a fixed sequence of comparison cycles. The ADS7854 belongs to the SAR ADC hierarchy within analog-to-digital converters and data-converter ICs, where its fully differential inputs and simultaneous-sampling architecture distinguish it from multiplexed single-channel converters.
The principal features of the ADS7854IPW are dual simultaneous sampling at 1 MSPS, 14-bit conversion resolution, two differential inputs, two individually programmable reference sources, and a flexible serial interface. Simultaneous sampling preserves the timing relationship between channels, which is important when calculating phase, gain, or transfer-function characteristics. Differential inputs also help reject common-mode noise when paired with suitable analog front-end circuitry.
Each conversion uses an internal sampling-and-hold stage followed by successive-approximation conversion. This architecture provides predictable sampling behavior without the pipeline latency associated with some high-speed converter types. The two conversion results are transferred through the serial interface in a frame that preserves the relationship between the sampled channels. For system-level gain calibration, the programmable references can be set independently for the two analog channels.
Typical uses include industrial data acquisition, vibration monitoring, motor-current analysis, power-system instrumentation, and dual-channel sensor measurement. The fully differential input architecture is especially useful when the source has low amplitude or when common-mode rejection is required. Designers must still provide suitable input filtering, reference bypassing, grounding, and source-impedance control to achieve predictable conversion performance.
For layout, place input, reference, and decoupling components close to their associated pins, and use a quiet ground strategy for the analog section. Keep digital-clock and serial-data routing away from sensitive analog inputs. The serial-interface timing and the power-supply requirements should be evaluated together because converter noise and source impedance can influence code accuracy.
This page combines the manufacturer’s device description with package, application, interface, and replacement guidance. It organizes the ADS7854IPW’s dual-channel SAR conversion characteristics into practical information for designing, sourcing, and maintaining industrial measurement systems.
直接替換替代品,適用於 ADS7854IPW — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS7854IPW (相同外形與佔位) — 差異在於 Resolution.
ADS8354
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7254
✅ 直接替換📋 參考替代品(不在目錄中)
ADS7854IPW 最大額定值與電氣特性
| ADC Type | Successive-approximation register (SAR) ADC |
| 解析度 | 14 bit |
| 取樣率 | 1 MSPS per channel |
| Number of Channels | 2 channels |
| Input Type | Fully differential |
| Sampling Mode | Simultaneous sampling |
| Architecture | Dual SAR ADC |
| Reference Sources | 2 individually programmable reference sources |
| 介面類型 | Flexible serial interface |
| 封裝 | 16-pin TSSOP |
| 安裝類型 | Surface mount |
ADS7854IPW 16-pin tssop 腳位配置指南
ADS7854IPW(16-pin tssop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS7854IPW.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS7854IPW 適用於 6 應用s: Industrial Vibration Monitoring, Motor Current and Phase Analysis, Power System Instrumentation, Precision Data Acquisition, Sensor Interface Systems, Test and Measurement Equipment.
Industrial Vibration Monitoring
The ADS7854IPW suits dual-axis vibration monitoring because it samples two fully differential channels simultaneously at up to 1 MSPS. Simultaneous acquisition preserves the phase relationship between accelerometer or strain-gauge signals, allowing the system to calculate displacement, vibration amplitude, and directional behavior without sequential-channel timing error. Each channel can use an independently programmable reference for gain calibration. The analog front end should provide low-noise amplification, anti-alias filtering, and source impedances appropriate for the converter’s sampling network.
推薦
Motor Current and Phase Analysis
The ADS7854IPW can capture a motor-current waveform and a synchronized control or position signal because its two channels sample simultaneously at 1 MSPS. Differential inputs suit current shunts and isolated sensor front ends when the signal remains within the converter’s analog input range. The independently programmable references support channel-level gain calibration, while the 14-bit code width provides 16,384 nominal digital levels per conversion. Input filtering and amplifier selection must preserve bandwidth and avoid saturating the ADC front end.
推薦
Power System Instrumentation
The ADS7854IPW is appropriate for synchronized acquisition of two quantities such as voltage and current in industrial power-monitoring equipment. Its two differential inputs reduce common-mode disturbance when paired with suitable sensing circuits, and simultaneous sampling improves phase measurement accuracy. The 1-MSPS conversion rate is useful for waveform analysis, while 14-bit resolution supports quantitative measurement beyond simple threshold detection. Carefully isolate high-voltage sensing paths and keep switching supplies and digital interfaces away from the analog input traces.
推薦
Precision Data Acquisition
The ADS7854IPW supports general-purpose dual-channel data acquisition where correlated analog values must be captured at the same instant. A 14-bit resolution and 1-MSPS rate provide a practical balance between measurement detail, throughput, and interface complexity. Two independently programmable reference sources allow each analog channel to be scaled or calibrated independently. For laboratory and process-control systems, use separate analog and digital grounding strategies, low-noise reference routing, and matched filtering to obtain repeatable code results.
推薦
Sensor Interface Systems
The ADS7854IPW can digitize two differential sensor outputs simultaneously when the source amplitude and bandwidth match the analog input range. Bridge, pressure, temperature, or strain sensors often benefit from differential acquisition because common-mode rejection reduces coupling from shared power and ground systems. Independent reference programming helps compensate channel gain differences, and simultaneous sampling simplifies compensation using a shared time base. The conditioning circuit must provide adequate settling behavior and keep sensor excitation noise outside the selected measurement bandwidth.
推薦
Test and Measurement Equipment
The ADS7854IPW is useful in portable or benchtop instrumentation that acquires two related analog signals at a common instant. Simultaneous 1-MSPS sampling supports transfer-function measurements, gain comparison, and synchronized waveform capture, while 14-bit resolution limits quantization error. The flexible serial interface can simplify connection to a controller operating across compatible supply conditions. Reference accuracy, clock jitter, source settling, and PCB leakage can all influence effective precision and should be evaluated as a complete analog chain.
推薦
推薦產品摘要
工程參考資料,適用於 ADS7854IPW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS8354 | ADS7254 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin TSSOP | 16-pin TSSOP family option | 16-pin TSSOP family option |
| ADC Architecture | Dual SAR ADC | Dual SAR ADC | Dual SAR ADC |
| Number of Channels | 2 channels | 2 channels | 2 channels |
| Input Type | Fully differential | Fully differential | Fully differential |
| Sampling Mode | Simultaneous sampling | Simultaneous sampling | Simultaneous sampling |
| Reference Sources | 2 individually programmable references | Individually programmable references | Individually programmable references |
| Serial Interface | Flexible serial interface | Flexible serial interface | Flexible serial interface |
主要差異化特點
- Dual-channel simultaneous sampling preserves inter-channel timing (對比ADS8354)
- Programmable references support channel-level calibration (對比ADS7254)
- 14-bit resolution at a 1-MSPS per-channel rate (對比ADS8354)
設計說明
Place the input, reference, and supply-decoupling components close to their corresponding pins. Route differential input pairs as tightly coupled traces with continuous reference-plane support and avoid routing them beneath digital clock or serial-data paths. The ADS7854IPW has two differential channels, so keeping both analog paths symmetric helps reduce differences in timing, attenuation, and susceptibility to common-mode disturbance. Verify the physical pin assignments against the manufacturer’s 16-pin TSSOP drawing before laying out the board.
Design the analog front end so each source can settle correctly for the SAR sampling network. Use an appropriate low-noise amplifier, limit source impedance, and include an antialias filter whose impedance remains suitable at the converter’s maximum acquisition rate. Because the device samples two channels simultaneously, apply consistent bandwidth and phase behavior to both signal paths when phase relationships matter. Keep the sample-and-hold return path short and isolate the reference network from noisy digital return currents.
Separate analog and digital supply paths as closely as the device architecture and datasheet recommendations allow. Place local high-frequency bypass capacitors at the supply pins and use additional bulk capacitance where the upstream regulator or wiring requires it. Reference voltage stability directly influences conversion scale, so use a clean reference source and short routing. Check startup, supply sequencing, and power-consumption requirements against the exact family-member data sheet before finalizing the power architecture.
Do not assume that family pin compatibility guarantees identical behavior or exact drop-in status. ADS8354 and ADS7254 are candidates because Texas Instruments groups them with ADS7854 as pin-compatible devices, but the exact ordering suffix, package, supply range, resolution, conversion speed, reference limits, and interface timing must be checked before substitution. Also avoid driving the differential inputs beyond their absolute maximum ratings or allowing signal transients to exceed the analog pin limits.
合規資訊
Compliance declarations were not identified in the manufacturer and distributor pages retrieved for the ADS7854IPW. Confirm the exact ordering suffix with the manufacturer before applying an environmental or automotive qualification claim.