AD8015ARZ - 240MHz Differential TIA | Analog Devices
MPN: AD8015ARZ ✓ چالاکAD8015ARZ گشتی
A transimpedance amplifier, or TIA, is an amplifier that converts a small input current into an output voltage. A photodiode generates current when illuminated by an optical carrier, while a TIA converts that current into a voltage suitable for further amplification, threshold detection, or digitization. The TIA belongs to the amplifier IC hierarchy and supports optical communication, monitoring, sensing, and instrumentation systems.
The AD8015 combines wide bandwidth, low noise, and differential output in one integrated circuit. Its 240 MHz bandwidth supports FDDI receivers and SONET/SDH receivers operating at data rates up to 155 Mbps. Differential output can reduce sensitivity to common-mode noise when the receiver is connected to a balanced clock, comparator, or analog-to-digital converter. The single-supply architecture simplifies system implementation compared with a dual-supply photodiode front end.
At the electrical level, the device is intended to combine a wideband current-to-voltage conversion stage with a differential output stage. The 500 ps pulse-width capability and 1.5 ns rise and fall times indicate very fast transient behavior, which helps preserve short optical pulse shapes. Its 8-pin SOIC package supports conventional surface-mount assembly, although high-speed layout demands short signal paths and careful return-plane management.
Typical applications include 155 Mbps SONET/SDH optical receivers, FDDI optical network interfaces, high-speed optical communication modules, and photodiode-based light measurement circuits. The differential output is particularly useful when the next stage can accept balanced signaling or when reducing common-mode pickup is a priority. The device can also support industrial optical sensing when the optical and electrical bandwidth requirements align with its operating characteristics.
The critical design consideration is parasitic control. Photodiode capacitance, feedback resistance, package inductance, and PCB capacitance can alter the effective bandwidth and stability of the transimpedance stage. Use the manufacturer pin description and recommended application circuit when assigning PCB connections, and keep the photodiode and feedback network close to the amplifier.
This page combines device specifications, pin-assignment guidance, practical fiber-optic design considerations, and technically constrained replacement options. It also distinguishes true drop-in candidates from functional alternatives that would require circuit or package changes.
جێگرەوەکانی جێگۆڕکێ بۆ AD8015ARZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD8015ARZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Primary Application, Amplifier Type, AEC-Q100 Qualification, REACH Status.
AD8017ARZ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD8016ARB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD8014ARZ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD8018ARZ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD8015ARZ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Single-supply differential-output transimpedance amplifier |
| Bandwidth | 240 MHz |
| Supported Data Rate | Up to 155 Mbps |
| Pulse Width | 500 ps |
| کاتی سەرهەڵدان | 1.5 ns |
| کاتی داکشان | 1.5 ns |
| ڕێکخستنی دەرچوون | Differential voltage |
| Input Type | Photodiode current input |
| Supply Configuration | Single supply |
| پاکێج | 8-pin SOIC |
| جۆری دامەزراندن | Surface mount |
| Primary Application | Fiber-optic receiver |
| Optical Protocol Application | FDDI receiver |
| Telecommunications Application | SONET/SDH receiver |
ڕێنمایی ڕێکخستنی پینی AD8015ARZ 8-pin soic
ڕێکخستنی پین بۆ AD8015ARZ (پاکێجی 8-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD8015ARZ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD8015ARZ گونجاوە بۆ 6 بەکارھێنانs: SONET/SDH Optical Receiver, FDDI Fiber-Optic Interface, High-Speed Optical Communication Module, Optical Light-Level Measurement, Industrial Optical Sensing, Optical Pulse Capture and Analysis.
SONET/SDH Optical Receiver
The AD8015ARZ fits a 155 Mbps-class SONET/SDH receiver because its 240 MHz bandwidth and 1.5 ns rise and fall times can process the edges of short optical pulses. Place the device in the photodiode front end so the incoming photocurrent becomes a differential voltage for downstream clock recovery or decision circuitry. The main design trade-off is that the 500 ps pulse-width capability does not eliminate the need for controlled PCB parasitics, so the photodiode, feedback network, and amplifier inputs should be closely coupled.
پێشنیارکراو
FDDI Fiber-Optic Interface
The AD8015ARZ is suitable for an FDDI receiver front end because the Analog Devices manufacturer datasheet identifies 240 MHz bandwidth and operation up to 155 Mbps as key capabilities. Its differential output provides a balanced signal for compatible downstream stages, while the single-supply arrangement simplifies system partitioning. For an FDDI design, verify the receiver's required bandwidth, allowable jitter, photodiode capacitance, and clock or data threshold circuitry before fixing the system bandwidth.
پێشنیارکراو
High-Speed Optical Communication Module
The AD8015ARZ can serve as the analog entry point in a high-speed optical communication module, converting weak photodiode current into a differential voltage before further processing. Its 240 MHz bandwidth provides margin for 155 Mbps-class links, and the 1.5 ns edge response supports short pulse reconstruction. Differential signaling is useful when the receiver board includes long interconnects or a downstream converter with balanced inputs, although module designers must balance bandwidth against photodiode capacitance and feedback stability.
پێشنیارکراو
Optical Light-Level Measurement
The AD8015ARZ can convert a photodiode signal into a differential measurement voltage for laboratory, industrial, or instrumentation systems that require fast optical response. Its 240 MHz bandwidth supports measurement of rapid optical events rather than only static light levels. The differential output can improve rejection of common-mode pickup when paired with balanced conversion circuitry, while the single-supply operation simplifies instrumentation front ends. Choose the photodiode and feedback values based on the expected current range and required temporal resolution.
پێشنیارکراو
Industrial Optical Sensing
The AD8015ARZ is suitable for industrial optical-sensing systems that detect fast modulation on a reflected or transmitted light path. Its 240 MHz bandwidth and 1.5 ns rise and fall times can preserve high-frequency intensity information, while differential output supports cleaner signal capture in electrically noisy environments. For industrial use, validate the operating-temperature range, supply tolerances, photodiode response, and environmental isolation requirements. A single-supply TIA also helps reduce the number of rails required around a compact sensor head.
پێشنیارکراو
Optical Pulse Capture and Analysis
The AD8015ARZ can form the input stage of a system that captures and analyzes short optical pulses because the device supports 500 ps pulse-width performance and 1.5 ns transitions. The differential voltage output can feed a suitable comparator, clocked sampler, or analysis channel without first converting the photodiode current to a single-ended signal. The practical limit is often the photodiode capacitance and physical interconnect, not the nominal amplifier bandwidth, so layout validation and bandwidth measurement remain essential.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD8015ARZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD8017ARZ | AD8016ARB | AD8014ARZ | AD8018ARZ |
|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Single-supply transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier | Transimpedance amplifier |
| Primary Application | Fiber-optic receiver | Optical receiver | Optical receiver | Optical receiver | Optical receiver |
جیاکەرەوە سەرەکییەکان
- Provides adequate bandwidth for 155 Mbps-class optical links (بەراورد بەAD8016ARB)
- Lower bandwidth than the highest-speed same-family option (بەراورد بەAD8014ARZ)
- Higher bandwidth than the lower-bandwidth family option (بەراورد بەAD8018ARZ)
- Complete differential transimpedance function in one device (بەراورد بەOPA875)
تێبینییەکانی دیزاین
Keep the photodiode connection, feedback element, and AD8015ARZ input nodes physically short. At 240 MHz, PCB capacitance and inductance can materially alter the transimpedance response, and photodiode capacitance can reduce stability. Follow the manufacturer application circuit, use an uninterrupted ground reference, and route differential outputs as a balanced pair.
Place the supply bypass capacitor adjacent to the amplifier's supply and ground pins, using the connection arrangement shown in the Analog Devices manufacturer datasheet. Keep the return current from the bypass network out of the photodiode input path. Confirm the actual supply range, quiescent current, and allowable supply ripple before selecting the regulator.
Treat the differential output as a high-speed balanced signal rather than two unrelated single-ended outputs. Match the pair through the PCB and connector path, maintain consistent spacing over transitions, and terminate appropriately according to the downstream receiver. If output ringing appears, inspect package parasitics, connector discontinuities, and probe loading before attributing it to the amplifier.
Do not assume that the nominal 240 MHz bandwidth guarantees a usable 155 Mbps receiver response. The complete optical path includes the photodiode capacitance, feedback impedance, amplifier stability, noise, jitter, and downstream circuitry. Verify the complete channel with the selected photodiode and layout because substituting a higher-bandwidth family member may change noise, gain, stability, and power characteristics.
زانیاری پابەندبوون
The exact-ordering-code compliance declarations must be confirmed using current Analog Devices product documentation and material-declaration records.