DS90C032TM/NOPB - 155.5 Mbps LVDS Quad Receiver | TI
MPN: DS90C032TM/NOPB ✓ چالاکDS90C032TM/NOPB گشتی
An LVDS receiver is an interface circuit that converts a low-voltage differential signal into a complementary CMOS output. In the signal-chain hierarchy, the DS90C032 belongs to the receiver and transceiver IC family within interface ICs. Its differential signaling reduces sensitivity to common-mode noise, while four independent channels consolidate several point-to-point links into one device.
Key features include four LVDS receivers, operation above 155.5 Mbps, a 5 V supply, and an industry-standard 16-pin SOIC footprint. According to the manufacturer datasheet, the device is designed for applications requiring ultra-low power dissipation and high data rates. The quad architecture also reduces component count and board area when four channels are required.
The DS90C032 uses low-voltage differential signaling to detect a small voltage difference between the positive and negative inputs of each channel. This architecture improves noise immunity compared with single-ended reception. TI identifies the footprint as compatible with the industry-standard 26LS32 quad differential receiver, which can simplify receiver-board redesign and provide an established hardware migration path.
Typical uses include industrial control links, test and measurement systems, video or imaging interfaces, telecommunications equipment, and point-to-point backplanes. The 155.5 Mbps capability suits links that must move control, synchronization, or compressed-data streams without converting the differential interface to a separate high-speed transceiver for every channel.
PCB layout should preserve the differential signal pair as a tightly coupled route, provide a continuous reference plane, and minimize stubs and layer transitions. Input protection and termination must be designed for the source voltage, cable length, and connector exposure; a receiver alone does not remove the need for system-level surge and electrostatic-discharge protection.
This product page combines electrical characteristics, procurement information, replacement guidance, and practical PCB guidance. It also distinguishes verified same-footprint alternatives from options that require different packages or different receiver functions, helping engineers make a replacement decision without changing PCB artwork.
جێگرەوەکانی جێگۆڕکێ بۆ DS90C032TM/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ DS90C032TM/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Technology.
DS90C032BTM/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →DS90C032TM/NOPB تایبەتمەندییەکان
| Receiver Type | LVDS quad CMOS differential line receiver |
| Number of Receiver Channels | 4 channels |
| Maximum Signaling Rate | 155.5 Mbps |
| زۆرترین فرێکوێنسیی کاتژمێر | 77.7 MHz |
| ڤۆڵتیەی دابینکردن | 5 V |
| Logic Levels | CMOS and TTL compatible |
| Input Propagation Delay | 1 ns |
| ئێستای دابینکردن | 11 mA |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C |
| پاکێج | 16-pin SOIC (D) |
| جۆری دامەزراندن | Surface mount |
| Signaling Technology | Low Voltage Differential Signaling (LVDS) |
| Lead-Free Status | No lead finish (NOPB) |
ڕێنمایی ڕێکخستنی پینی DS90C032TM/NOPB 16-pin soic (d)
ڕێکخستنی پین بۆ DS90C032TM/NOPB (پاکێجی 16-pin soic (d)). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ DS90C032TM/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
DS90C032TM/NOPB گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation Links, Test and Measurement Data Acquisition, Point-to-Point Communications Equipment, Imaging and Video Interfaces, Backplane and Board-to-Board Links, Communications and Network Interface Cards.
Industrial Control and Automation Links
The DS90C032TM/NOPB fits industrial control cabinets and distributed automation equipment that must transfer command, status, or synchronization information across several differential links. Four independent receiver channels reduce the number of interface packages needed on a controller board, while operation above 155.5 Mbps provides margin above typical control-data requirements. Its 5 V supply and -40 °C to +85 °C operating range align with conventional industrial electronics. The implementation should preserve tightly coupled differential routing, use solid reference planes, and place input protection near exposed connectors.
پێشنیارکراو
Test and Measurement Data Acquisition
The DS90C032TM/NOPB is appropriate for laboratory and industrial data-acquisition equipment that must recover differential signals from remote sensors, instrument modules, or test fixtures. Four channels can receive related timing, trigger, status, and measurement-control signals in parallel, and the 155.5 Mbps signaling capability supports faster links than conventional low-speed field buses. Differential reception helps preserve signal integrity when cables run near switching power converters or digital processors. Use controlled pair geometry, uninterrupted return paths, and input networks selected for the cable and connector environment.
پێشنیارکراو
Point-to-Point Communications Equipment
The DS90C032TM/NOPB can support point-to-point communication modules, interface cards, and telecommunications equipment requiring a compact LVDS receiving stage. The four-channel arrangement allows one device to recover multiple related streams, while the 16-pin SOIC package supports conventional surface-mount assembly. Signaling above 155.5 Mbps can accommodate synchronized data, status, and control traffic when the source, cable, and connectors meet the applicable signal-integrity requirements. Validate eye performance and common-mode limits across temperature, and use a continuous reference plane beneath the differential routes.
پێشنیارکراو
Imaging and Video Interfaces
The DS90C032TM/NOPB is suitable for imaging systems and video interfaces that carry low-voltage differential synchronization or compressed-data links between circuit boards. Four receiver channels can handle multiple synchronizing or control pairs, and the device's 155.5 Mbps capability is appropriate for moderate-rate point-to-point video transport. LVDS differential signaling reduces susceptibility to common-mode interference compared with a single-ended receiver, which is valuable near high-speed processors and display circuitry. Source impedance, cable length, and connector transitions still determine usable eye margin, so simulate the complete channel rather than relying on the receiver rating alone.
پێشنیارکراو
Backplane and Board-to-Board Links
The DS90C032TM/NOPB can receive differential inter-board signals in compact backplane, mezzanine, and board-to-board interfaces. Its 16-pin SOIC package makes routing and assembly straightforward, and the four channels reduce the receiver count when several point-to-point links cross a board boundary. The LVDS architecture supports reliable reception in environments containing parallel digital buses and switching supplies, provided the PCB maintains continuous differential geometry and a low-impedance reference plane. Avoid adding test pads that create uncontrolled stubs unless the stubs are included in channel simulation.
پێشنیارکراو
Communications and Network Interface Cards
The DS90C032TM/NOPB is suitable for communication interface cards that receive several low-voltage differential streams from another board, rack, or external equipment. Four channels support a practical mix of payload, clock, and control links, while operation above 155.5 Mbps provides useful throughput for moderately paced interfaces. The CMOS outputs can feed surrounding digital logic when voltage and timing requirements are met. Engineers should keep the receiver close to the connector when trace loss or connector transitions materially affect the channel, and verify that the fail-safe and common-mode behavior matches the source when the link can become unplugged or unpowered.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ DS90C032TM/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | DS90C032BTM/NOPB |
|---|---|---|
| Package | SOIC-16 (D) | SOIC-16 (D) |
| Brand | Texas Instruments | Texas Instruments |
| Receiver Function | Quad LVDS differential line receiver | Quad LVDS differential line receiver |
| Number of Channels | 4 channels | 4 channels |
| Maximum Signaling Rate | 155.5 Mbps | 155.5 Mbps |
| Maximum Clock Frequency | 77.7 MHz | 77.7 MHz |
| Supply Voltage | 5 V | 5 V |
| Signal Standard | LVDS | LVDS |
جیاکەرەوە سەرەکییەکان
- Four high-speed differential channels in one package (بەراورد بەDS90C032BTM/NOPB)
- Established 16-pin SOIC interface footprint (بەراورد بەDS90C032BTM/NOPB)
- Direct 26LS32 footprint migration route (بەراورد بەDS90C032BTM/NOPB)
تێبینییەکانی دیزاین
Route every differential input as a tightly coupled pair over a continuous reference plane. Maintain consistent spacing, minimize vias and layer changes, and remove unnecessary test pads or stubs because discontinuities can degrade the received eye even when the PCB is electrically quiet. Place the receiver near the connector when cable loss or connector transitions contribute meaningful channel loss.
Separate the LVDS input region from switching nodes, high-current supply paths, oscillators, and fast digital return currents. A solid ground or reference plane beneath the interface gives the differential receiver a low-impedance return path. If the source must cross a split or heavily loaded plane, include the complete return discontinuity in signal-integrity analysis rather than adding an arbitrary ground stitch.
Do not treat a shared SOIC footprint as proof of complete electrical equivalence. Verify input common-mode limits, differential thresholds, propagation delay, output levels, fail-safe behavior, temperature grade, and power requirements before replacing the DS90C032TM/NOPB. The documented 26LS32 footprint compatibility also requires checking signal and application differences rather than assuming an automatic function-for-function substitution.
Use a controlled source termination and receiver-side network that match the intended cable impedance and topology. Avoid long parallel runs of unrelated high-speed signals next to the differential pairs, and place external protection near any user-accessible connector. The receiver's differential architecture improves common-mode noise immunity, but it does not prevent radiated coupling or damage from surge events at the interface.
زانیاری پابەندبوون
The NOPB suffix identifies the no-lead-finish ordering option. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the cited product material.