Texas Instruments

DS90C032TM/NOPB - 155.5 Mbps LVDS Quad Receiver | TI

MPN: DS90C032TM/NOPB ✓ Nakahanda
5 V Vdss 11 mA Id 16-pin SOIC (D) Package 77.7 MHz Speed
MOQ: 1 |

DS90C032TM/NOPB Ulas

The Texas Instruments DS90C032TM/NOPB is a four-channel LVDS differential line receiver supporting data rates in excess of 155.5 Mbps at 77.7 MHz, packaged in a 16-pin SOIC. The receiver combines a low-power CMOS implementation with a 5 V supply and differential inputs suitable for industrial, communications, and data-acquisition systems.

An LVDS receiver is an interface circuit that converts a low-voltage differential signal into a complementary CMOS output. In the signal-chain hierarchy, the DS90C032 belongs to the receiver and transceiver IC family within interface ICs. Its differential signaling reduces sensitivity to common-mode noise, while four independent channels consolidate several point-to-point links into one device.

Key features include four LVDS receivers, operation above 155.5 Mbps, a 5 V supply, and an industry-standard 16-pin SOIC footprint. According to the manufacturer datasheet, the device is designed for applications requiring ultra-low power dissipation and high data rates. The quad architecture also reduces component count and board area when four channels are required.

The DS90C032 uses low-voltage differential signaling to detect a small voltage difference between the positive and negative inputs of each channel. This architecture improves noise immunity compared with single-ended reception. TI identifies the footprint as compatible with the industry-standard 26LS32 quad differential receiver, which can simplify receiver-board redesign and provide an established hardware migration path.

Typical uses include industrial control links, test and measurement systems, video or imaging interfaces, telecommunications equipment, and point-to-point backplanes. The 155.5 Mbps capability suits links that must move control, synchronization, or compressed-data streams without converting the differential interface to a separate high-speed transceiver for every channel.

PCB layout should preserve the differential signal pair as a tightly coupled route, provide a continuous reference plane, and minimize stubs and layer transitions. Input protection and termination must be designed for the source voltage, cable length, and connector exposure; a receiver alone does not remove the need for system-level surge and electrostatic-discharge protection.

This product page combines electrical characteristics, procurement information, replacement guidance, and practical PCB guidance. It also distinguishes verified same-footprint alternatives from options that require different packages or different receiver functions, helping engineers make a replacement decision without changing PCB artwork.

Mga alternatibo na pwedeng ilagay na DS90C032TM/NOPB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok DS90C032TM/NOPB (parehas na form factor at footprint) — pagkakaiba sa Package, Technology.

Texas Instruments
Package: 16-pin SOIC
Technology: LVDS
Texas Instruments
Technology: CMOS

DS90C032BTM/NOPB

✅ Drop-In
Texas Instruments
📦 SOIC-16 (D)
LVDS quad CMOS differential line receiver · 4 channels · 0 transmitters · LVDS · 155.5 Mbps · 77.7 MHz · 4.5 V to 5.5 V · 11 mA

Magkontak para sa presyo

Tingnan ang Datasheet →

DS90C032TM/NOPB Mga Spesipikasyon

Receiver Type LVDS quad CMOS differential line receiver
Number of Receiver Channels 4 channels
Maximum Signaling Rate 155.5 Mbps
Maksimum na Taktiko ng Oras 77.7 MHz
Volte ng Pagbibigay 5 V
Logic Levels CMOS and TTL compatible
Input Propagation Delay 1 ns
Kuru-kuryente ng Pagbibigay 11 mA
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Packhaging 16-pin SOIC (D)
Uri ng Pagpapasok Surface mount
Signaling Technology Low Voltage Differential Signaling (LVDS)
Lead-Free Status No lead finish (NOPB)

Gabay sa Pin Configuration ng DS90C032TM/NOPB 16-pin soic (d)

Pin configuration para sa DS90C032TM/NOPB (16-pin soic (d) package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-pin soic (d) package para sa DS90C032TM/NOPB

Wala ng detalyadong pinout data na magagamit para sa DS90C032TM/NOPB.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

DS90C032TM/NOPB ay nararapat para sa 6 aplikasyons: Industrial Control and Automation Links, Test and Measurement Data Acquisition, Point-to-Point Communications Equipment, Imaging and Video Interfaces, Backplane and Board-to-Board Links, Communications and Network Interface Cards.

🏭

Industrial Control and Automation Links

The DS90C032TM/NOPB fits industrial control cabinets and distributed automation equipment that must transfer command, status, or synchronization information across several differential links. Four independent receiver channels reduce the number of interface packages needed on a controller board, while operation above 155.5 Mbps provides margin above typical control-data requirements. Its 5 V supply and -40 °C to +85 °C operating range align with conventional industrial electronics. The implementation should preserve tightly coupled differential routing, use solid reference planes, and place input protection near exposed connectors.

🔧

Test and Measurement Data Acquisition

The DS90C032TM/NOPB is appropriate for laboratory and industrial data-acquisition equipment that must recover differential signals from remote sensors, instrument modules, or test fixtures. Four channels can receive related timing, trigger, status, and measurement-control signals in parallel, and the 155.5 Mbps signaling capability supports faster links than conventional low-speed field buses. Differential reception helps preserve signal integrity when cables run near switching power converters or digital processors. Use controlled pair geometry, uninterrupted return paths, and input networks selected for the cable and connector environment.

🌐

Point-to-Point Communications Equipment

The DS90C032TM/NOPB can support point-to-point communication modules, interface cards, and telecommunications equipment requiring a compact LVDS receiving stage. The four-channel arrangement allows one device to recover multiple related streams, while the 16-pin SOIC package supports conventional surface-mount assembly. Signaling above 155.5 Mbps can accommodate synchronized data, status, and control traffic when the source, cable, and connectors meet the applicable signal-integrity requirements. Validate eye performance and common-mode limits across temperature, and use a continuous reference plane beneath the differential routes.

📺

Imaging and Video Interfaces

The DS90C032TM/NOPB is suitable for imaging systems and video interfaces that carry low-voltage differential synchronization or compressed-data links between circuit boards. Four receiver channels can handle multiple synchronizing or control pairs, and the device's 155.5 Mbps capability is appropriate for moderate-rate point-to-point video transport. LVDS differential signaling reduces susceptibility to common-mode interference compared with a single-ended receiver, which is valuable near high-speed processors and display circuitry. Source impedance, cable length, and connector transitions still determine usable eye margin, so simulate the complete channel rather than relying on the receiver rating alone.

🖥️

Backplane and Board-to-Board Links

The DS90C032TM/NOPB can receive differential inter-board signals in compact backplane, mezzanine, and board-to-board interfaces. Its 16-pin SOIC package makes routing and assembly straightforward, and the four channels reduce the receiver count when several point-to-point links cross a board boundary. The LVDS architecture supports reliable reception in environments containing parallel digital buses and switching supplies, provided the PCB maintains continuous differential geometry and a low-impedance reference plane. Avoid adding test pads that create uncontrolled stubs unless the stubs are included in channel simulation.

🌐

Communications and Network Interface Cards

The DS90C032TM/NOPB is suitable for communication interface cards that receive several low-voltage differential streams from another board, rack, or external equipment. Four channels support a practical mix of payload, clock, and control links, while operation above 155.5 Mbps provides useful throughput for moderately paced interfaces. The CMOS outputs can feed surrounding digital logic when voltage and timing requirements are met. Engineers should keep the receiver close to the connector when trace loss or connector transitions materially affect the channel, and verify that the fail-safe and common-mode behavior matches the source when the link can become unplugged or unpowered.

Buod ng mga Inirekomendang Produkto

DS90C032TM/NOPB Texas Instruments Ginagamit sa: Industrial Control and Automation Links, Test and Measurement Data Acquisition, Point-to-Point Communications Equipment, Imaging and Video Interfaces, Backplane and Board-to-Board Links, Communications and Network Interface Cards DS90C032BTM/NOPB Same-family drop-in candidate Ginagamit sa: Industrial Control and Automation Links, Test and Measurement Data Acquisition, Point-to-Point Communications Equipment, Imaging and Video Interfaces, Backplane and Board-to-Board Links, Communications and Network Interface Cards
What is DS90C032TM/NOPB?
The DS90C032TM/NOPB is a Texas Instruments four-channel LVDS differential line receiver designed for high-speed, low-power interface systems. According to the manufacturer datasheet, it supports signaling rates in excess of 155.5 Mbps at 77.7 MHz, operates from a 5 V supply, and is housed in a 16-pin SOIC package.
What are the key specifications of DS90C032TM/NOPB?
The principal DS90C032TM/NOPB specifications are four LVDS receiver channels, operation above 155.5 Mbps, a 5 V supply, CMOS and TTL-compatible logic levels, and a 16-pin SOIC package. The manufacturer also identifies a 1 ns propagation-delay figure and an operating-temperature range from -40 °C to +85 °C for this device family.
Where can I download the DS90C032TM/NOPB datasheet PDF?
The official DS90C032TM/NOPB datasheet PDF is available from Texas Instruments at the DS90C032 datasheet link on this page. It is the preferred document for the complete pin-description table, recommended applications, electrical characteristics, and typical connection diagrams. The product page also links ordering information for the exact 16-pin SOIC orderable MPN.
Where can I find the DS90C032TM/NOPB pinout?
Use the pin-description table and package drawing in the official Texas Instruments DS90C032 manufacturer datasheet to assign the 16 SOIC pins. The four differential receiver channels and power connections should be assigned directly from that table rather than inferred from another quad differential receiver. The SOIC-16 package diagram on this page provides the package-level footprint reference.
Is DS90C032TM/NOPB suitable for industrial control systems?
The DS90C032TM/NOPB is suitable for industrial point-to-point links requiring low-noise differential reception and data rates up to 155.5 Mbps. Its four channels can consolidate separate command, status, or synchronization links, while the -40 °C to +85 °C operating range suits temperature-controlled industrial equipment.
How does DS90C032TM/NOPB compare with DS90C032BTM/NOPB?
The DS90C032TM/NOPB and DS90C032BTM/NOPB are both identified as four-channel LVDS receivers in 16-pin SOIC packages, and the comparison information describes their terminals and packages as consistent. The available material does not quantify every electrical difference, so engineers should compare the temperature-grade and ordering tables before treating either part as a universal substitute.
When should I choose DS90C032TM/NOPB over another quad LVDS receiver?
Choose DS90C032TM/NOPB when the design needs four LVDS input channels, operation above 155.5 Mbps, a 5 V supply, and the established 16-pin SOIC footprint. Confirm that the alternative also provides four differential inputs, compatible logic levels, adequate input common-mode range, and the required temperature range before approving a replacement.
What can replace DS90C032TM/NOPB?
The closest documented same-manufacturer replacement is DS90C032BTM/NOPB because it is described as a four-channel LVDS receiver with a compatible 16-pin SOIC package. Confirm the complete pin and electrical characteristics in the manufacturer documentation before substitution. Use the Request a Quote form on this page to ask for availability and qualification of that exact replacement.
Is DS90C032TM/NOPB the same as DS90C032BTM/NOPB?
The DS90C032TM/NOPB and DS90C032BTM/NOPB are related four-channel LVDS receivers in the same 16-pin SOIC family, and the available comparison describes consistent terminals and packages. They should not be treated as automatically identical without checking the exact temperature-grade and electrical specifications for the selected orderable device.
What is the best cross-brand equivalent for DS90C032TM/NOPB?
No cross-brand drop-in equivalent has been established for the DS90C032TM/NOPB on the basis of a documented 16-pin SOIC pinout and matching electrical specifications. A receiver with a superficially similar function can still differ in input common-mode range, fail-safe behavior, propagation delay, or logic thresholds. Select a cross-brand candidate only after a complete pin-by-pin and electrical comparison.
Does DS90C032TM/NOPB support the same footprint as a 26LS32 receiver?
Yes. Texas Instruments states that the DS90C032 footprint is the same as the industry-standard 26LS32 quad differential receiver. The 16-pin SOIC package can therefore support hardware migration in suitable designs, but signal-polarity, input-threshold, fail-safe, and application differences still require circuit-level verification.
How should DS90C032TM/NOPB LVDS traces be routed?
Route each DS90C032TM/NOPB differential pair as a tightly coupled, continuous path over a solid reference plane. Match the pair spacing as closely as practical, avoid stubs and unnecessary layer changes, and keep the receiver away from high-energy switching paths. Connector and cable protection should also be designed for the exposed interface rather than relying on the receiver alone.
Where can I buy DS90C032TM/NOPB online?
Use the Request a Quote form on this page to request DS90C032TM/NOPB availability, lead time, and an order quotation for the exact 16-pin SOIC orderable MPN. The part is also listed by Texas Instruments for order through its authorized channel, but current commercial terms can change and should be confirmed when the quotation is prepared.
What is the lead time for DS90C032TM/NOPB?
Current lead time for DS90C032TM/NOPB should be confirmed through the Request a Quote form on this page. Lead time depends on manufacturer inventory, order quantity, and fulfillment conditions, so a generic schedule may not represent the actual assembly date. Submit the required quantity and target timing with the request for an accurate quotation.
Is DS90C032TM/NOPB in stock?
Stock for DS90C032TM/NOPB is dynamic and should be checked through the Request a Quote form on this page. Provide the required quantity and shipment destination so the current availability can be confirmed for the exact Texas Instruments orderable MPN rather than for an unrelated DS90C032 package suffix.

Impormasyon ng Talumpati sa Engineering for DS90C032TM/NOPB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the DS90C032TM/NOPB when the design requires four LVDS differential inputs, signaling above 155.5 Mbps, CMOS or TTL-compatible outputs, and a 16-pin SOIC footprint. Its 5 V supply and -40 °C to +85 °C temperature range fit conventional industrial and commercial interface equipment. Consider DS90C032BTM/NOPB when its exact ordering and temperature information satisfy the project requirements and a same-manufacturer drop-in is preferred. Both parts use the same quad-receiver package family, but engineers must still compare common-mode range, thresholds, delay, fail-safe behavior, and qualification before substitution. No cross-brand part is presented as a drop-in replacement because a documented pin-compatible and electrically equivalent candidate has not been established. If the PCB requires fewer channels, a smaller receiver, different supply voltage, or a transmit function, a broader interface-IC selection may provide a better fit.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto DS90C032BTM/NOPB
Package SOIC-16 (D) SOIC-16 (D)
Brand Texas Instruments Texas Instruments
Receiver Function Quad LVDS differential line receiver Quad LVDS differential line receiver
Number of Channels 4 channels 4 channels
Maximum Signaling Rate 155.5 Mbps 155.5 Mbps
Maximum Clock Frequency 77.7 MHz 77.7 MHz
Supply Voltage 5 V 5 V
Signal Standard LVDS LVDS

Pangunahing mga Pagkakaiba

  • Four high-speed differential channels in one package (kumpara saDS90C032BTM/NOPB)
  • Established 16-pin SOIC interface footprint (kumpara saDS90C032BTM/NOPB)
  • Direct 26LS32 footprint migration route (kumpara saDS90C032BTM/NOPB)

Talaan ng Disenyo

Route every differential input as a tightly coupled pair over a continuous reference plane. Maintain consistent spacing, minimize vias and layer changes, and remove unnecessary test pads or stubs because discontinuities can degrade the received eye even when the PCB is electrically quiet. Place the receiver near the connector when cable loss or connector transitions contribute meaningful channel loss.

Separate the LVDS input region from switching nodes, high-current supply paths, oscillators, and fast digital return currents. A solid ground or reference plane beneath the interface gives the differential receiver a low-impedance return path. If the source must cross a split or heavily loaded plane, include the complete return discontinuity in signal-integrity analysis rather than adding an arbitrary ground stitch.

Do not treat a shared SOIC footprint as proof of complete electrical equivalence. Verify input common-mode limits, differential thresholds, propagation delay, output levels, fail-safe behavior, temperature grade, and power requirements before replacing the DS90C032TM/NOPB. The documented 26LS32 footprint compatibility also requires checking signal and application differences rather than assuming an automatic function-for-function substitution.

Use a controlled source termination and receiver-side network that match the intended cable impedance and topology. Avoid long parallel runs of unrelated high-speed signals next to the differential pairs, and place external protection near any user-accessible connector. The receiver's differential architecture improves common-mode noise immunity, but it does not prevent radiated coupling or damage from surge events at the interface.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The NOPB suffix identifies the no-lead-finish ordering option. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the cited product material.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ds90c032tm nopb DS90C032TM/NOPB datasheet DS90C032TM/NOPB datasheet pdf DS90C032TM/NOPB pinout DS90C032TM/NOPB replacement DS90C032TM/NOPB equivalent DS90C032TM/NOPB drop-in replacement DS90C032TM/NOPB price DS90C032TM/NOPB stock DS90C032TM/NOPB footprint DS90C032TM/NOPB vs DS90C032BTM/NOPB DS90C032TM/NOPB application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments DS90C032TM/NOPB DS90C032BTM/NOPB DS90C032 LVDS Low Voltage Differential Signaling differential line receiver quad receiver interface IC CMOS TTL SOIC-16 surface-mount technology 155.5 Mbps 77.7 MHz 5 V supply 1 ns propagation delay industrial control data acquisition board-to-board communication
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ