DS90C032TM/NOPB - 155.5 Mbps LVDS Quad Receiver | TI
Référence : DS90C032TM/NOPB ✓ ActifDS90C032TM/NOPB Présentation
An LVDS receiver is an interface circuit that converts a low-voltage differential signal into a complementary CMOS output. In the signal-chain hierarchy, the DS90C032 belongs to the receiver and transceiver IC family within interface ICs. Its differential signaling reduces sensitivity to common-mode noise, while four independent channels consolidate several point-to-point links into one device.
Key features include four LVDS receivers, operation above 155.5 Mbps, a 5 V supply, and an industry-standard 16-pin SOIC footprint. According to the manufacturer datasheet, the device is designed for applications requiring ultra-low power dissipation and high data rates. The quad architecture also reduces component count and board area when four channels are required.
The DS90C032 uses low-voltage differential signaling to detect a small voltage difference between the positive and negative inputs of each channel. This architecture improves noise immunity compared with single-ended reception. TI identifies the footprint as compatible with the industry-standard 26LS32 quad differential receiver, which can simplify receiver-board redesign and provide an established hardware migration path.
Typical uses include industrial control links, test and measurement systems, video or imaging interfaces, telecommunications equipment, and point-to-point backplanes. The 155.5 Mbps capability suits links that must move control, synchronization, or compressed-data streams without converting the differential interface to a separate high-speed transceiver for every channel.
PCB layout should preserve the differential signal pair as a tightly coupled route, provide a continuous reference plane, and minimize stubs and layer transitions. Input protection and termination must be designed for the source voltage, cable length, and connector exposure; a receiver alone does not remove the need for system-level surge and electrostatic-discharge protection.
This product page combines electrical characteristics, procurement information, replacement guidance, and practical PCB guidance. It also distinguishes verified same-footprint alternatives from options that require different packages or different receiver functions, helping engineers make a replacement decision without changing PCB artwork.
Alternatives de remplacement direct pour DS90C032TM/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DS90C032TM/NOPB (même facteur de forme et même empreinte) — différant par Package, Technology.
DS90C032BTM/NOPB
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →DS90C032TM/NOPB Spécifications
| Receiver Type | LVDS quad CMOS differential line receiver |
| Number of Receiver Channels | 4 channels |
| Maximum Signaling Rate | 155.5 Mbps |
| Fréquence d'horloge maximale | 77.7 MHz |
| Tension d'alimentation | 5 V |
| Logic Levels | CMOS and TTL compatible |
| Input Propagation Delay | 1 ns |
| Courant d'alimentation | 11 mA |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Boîtier | 16-pin SOIC (D) |
| Type de montage | Surface mount |
| Signaling Technology | Low Voltage Differential Signaling (LVDS) |
| Lead-Free Status | No lead finish (NOPB) |
Guide de configuration des broches du DS90C032TM/NOPB 16-pin soic (d)
Configuration des broches du DS90C032TM/NOPB (boîtier 16-pin soic (d)). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour DS90C032TM/NOPB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
DS90C032TM/NOPB convient pour 6 applications: Industrial Control and Automation Links, Test and Measurement Data Acquisition, Point-to-Point Communications Equipment, Imaging and Video Interfaces, Backplane and Board-to-Board Links, Communications and Network Interface Cards.
Industrial Control and Automation Links
The DS90C032TM/NOPB fits industrial control cabinets and distributed automation equipment that must transfer command, status, or synchronization information across several differential links. Four independent receiver channels reduce the number of interface packages needed on a controller board, while operation above 155.5 Mbps provides margin above typical control-data requirements. Its 5 V supply and -40 °C to +85 °C operating range align with conventional industrial electronics. The implementation should preserve tightly coupled differential routing, use solid reference planes, and place input protection near exposed connectors.
Recommandé
Test and Measurement Data Acquisition
The DS90C032TM/NOPB is appropriate for laboratory and industrial data-acquisition equipment that must recover differential signals from remote sensors, instrument modules, or test fixtures. Four channels can receive related timing, trigger, status, and measurement-control signals in parallel, and the 155.5 Mbps signaling capability supports faster links than conventional low-speed field buses. Differential reception helps preserve signal integrity when cables run near switching power converters or digital processors. Use controlled pair geometry, uninterrupted return paths, and input networks selected for the cable and connector environment.
Recommandé
Point-to-Point Communications Equipment
The DS90C032TM/NOPB can support point-to-point communication modules, interface cards, and telecommunications equipment requiring a compact LVDS receiving stage. The four-channel arrangement allows one device to recover multiple related streams, while the 16-pin SOIC package supports conventional surface-mount assembly. Signaling above 155.5 Mbps can accommodate synchronized data, status, and control traffic when the source, cable, and connectors meet the applicable signal-integrity requirements. Validate eye performance and common-mode limits across temperature, and use a continuous reference plane beneath the differential routes.
Recommandé
Imaging and Video Interfaces
The DS90C032TM/NOPB is suitable for imaging systems and video interfaces that carry low-voltage differential synchronization or compressed-data links between circuit boards. Four receiver channels can handle multiple synchronizing or control pairs, and the device's 155.5 Mbps capability is appropriate for moderate-rate point-to-point video transport. LVDS differential signaling reduces susceptibility to common-mode interference compared with a single-ended receiver, which is valuable near high-speed processors and display circuitry. Source impedance, cable length, and connector transitions still determine usable eye margin, so simulate the complete channel rather than relying on the receiver rating alone.
Recommandé
Backplane and Board-to-Board Links
The DS90C032TM/NOPB can receive differential inter-board signals in compact backplane, mezzanine, and board-to-board interfaces. Its 16-pin SOIC package makes routing and assembly straightforward, and the four channels reduce the receiver count when several point-to-point links cross a board boundary. The LVDS architecture supports reliable reception in environments containing parallel digital buses and switching supplies, provided the PCB maintains continuous differential geometry and a low-impedance reference plane. Avoid adding test pads that create uncontrolled stubs unless the stubs are included in channel simulation.
Recommandé
Communications and Network Interface Cards
The DS90C032TM/NOPB is suitable for communication interface cards that receive several low-voltage differential streams from another board, rack, or external equipment. Four channels support a practical mix of payload, clock, and control links, while operation above 155.5 Mbps provides useful throughput for moderately paced interfaces. The CMOS outputs can feed surrounding digital logic when voltage and timing requirements are met. Engineers should keep the receiver close to the connector when trace loss or connector transitions materially affect the channel, and verify that the fail-safe and common-mode behavior matches the source when the link can become unplugged or unpowered.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DS90C032TM/NOPB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DS90C032BTM/NOPB |
|---|---|---|
| Package | SOIC-16 (D) | SOIC-16 (D) |
| Brand | Texas Instruments | Texas Instruments |
| Receiver Function | Quad LVDS differential line receiver | Quad LVDS differential line receiver |
| Number of Channels | 4 channels | 4 channels |
| Maximum Signaling Rate | 155.5 Mbps | 155.5 Mbps |
| Maximum Clock Frequency | 77.7 MHz | 77.7 MHz |
| Supply Voltage | 5 V | 5 V |
| Signal Standard | LVDS | LVDS |
Principaux différenciateurs
- Four high-speed differential channels in one package (vs DS90C032BTM/NOPB)
- Established 16-pin SOIC interface footprint (vs DS90C032BTM/NOPB)
- Direct 26LS32 footprint migration route (vs DS90C032BTM/NOPB)
Notes de conception
Route every differential input as a tightly coupled pair over a continuous reference plane. Maintain consistent spacing, minimize vias and layer changes, and remove unnecessary test pads or stubs because discontinuities can degrade the received eye even when the PCB is electrically quiet. Place the receiver near the connector when cable loss or connector transitions contribute meaningful channel loss.
Separate the LVDS input region from switching nodes, high-current supply paths, oscillators, and fast digital return currents. A solid ground or reference plane beneath the interface gives the differential receiver a low-impedance return path. If the source must cross a split or heavily loaded plane, include the complete return discontinuity in signal-integrity analysis rather than adding an arbitrary ground stitch.
Do not treat a shared SOIC footprint as proof of complete electrical equivalence. Verify input common-mode limits, differential thresholds, propagation delay, output levels, fail-safe behavior, temperature grade, and power requirements before replacing the DS90C032TM/NOPB. The documented 26LS32 footprint compatibility also requires checking signal and application differences rather than assuming an automatic function-for-function substitution.
Use a controlled source termination and receiver-side network that match the intended cable impedance and topology. Avoid long parallel runs of unrelated high-speed signals next to the differential pairs, and place external protection near any user-accessible connector. The receiver's differential architecture improves common-mode noise immunity, but it does not prevent radiated coupling or damage from surge events at the interface.
Informations de conformité
The NOPB suffix identifies the no-lead-finish ordering option. RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the cited product material.