LM2903PWRG3 - Dual Differential Comparator | Texas Instruments
MPN: LM2903PWRG3 ✓ چالاکLM2903PWRG3 گشتی
A differential comparator is an analog integrated circuit that evaluates the relative voltage between its inverting and non-inverting inputs. When the non-inverting input rises above the inverting input, the associated output transistor turns on; when the relationship reverses, the output transistor turns off. This complementary sensing function places the LM2903 in the amplifier and interface IC hierarchy, where comparator ICs convert small analog voltage differences into logic-level decisions for control, protection, and signaling systems.
The LM2903 provides two independent channels in one package, reducing component count in designs requiring more than one threshold comparison. Its open-collector outputs permit wired connections and external pull-up resistors, providing flexibility for interfacing with TTL, CMOS, and other digital logic families. The 2 V to 36 V supply range supports both low-voltage control circuits and higher-voltage industrial systems, while the differential input arrangement helps monitor two sensed voltages without requiring a separate input amplifier.
The PWRG3 ordering configuration is supplied in an 8-TSSOP surface-mount package for compact PCB layouts and automated assembly. Open-collector outputs require suitable pull-up arrangements when a logic-high output state is needed. Because both comparators share the same supply package while retaining independent inputs and outputs, designers can allocate the two channels to separate analog domains when those domains remain compatible with the device's common-mode and supply limitations.
Typical uses include overvoltage and undervoltage detection, window monitoring, sensor threshold comparison, industrial control logic, and power-supply supervision. The two-channel organization is particularly useful in window comparators, where one channel establishes an upper threshold and the other establishes a lower threshold, or in systems where separate alert functions require independent decisions.
When designing a PCB around the LM2903PWRG3, place input, output, and bypass connections to minimize noise coupling into the high-impedance comparison inputs. Select pull-up resistors according to the required sink current, rise time, and logic family. Verify common-mode range, supply polarity, and output-state requirements across temperature and supply tolerance before treating the comparator output as a guaranteed logic-high signal.
This product page combines the Texas Instruments device information with package, application, sourcing, and replacement guidance. It also provides design-focused comparisons that help engineers distinguish ordering-grade, package, supply, and output-stage differences before selecting a pin-compatible replacement or integrating the device into a new analog control board.
جێگرەوەکانی جێگۆڕکێ بۆ LM2903PWRG3 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM2903PWRG3 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Current, Output Type, Input Bias Current, Comparator Type.
LM2903PWR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903YPT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903PWRG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2903PWRG3 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Comparator Type | Dual differential comparator |
| Number of Elements | 2 channels |
| جۆری دەرچوون | Open collector |
| Single-Supply Voltage Range | 2 V to 36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V |
| Compatible Logic Families | CMOS, MOS, open-collector, and TTL |
| Tested Supply Voltage | 30 V |
| پاکێج | 8-TSSOP, 4.40 mm width |
| جۆری دامەزراندن | Surface mount |
| Supplier Packaging | Tape and reel |
ڕێنمایی ڕێکخستنی پینی LM2903PWRG3 8-tssop, 4.40 mm width
ڕێکخستنی پین بۆ LM2903PWRG3 (پاکێجی 8-tssop, 4.40 mm width). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM2903PWRG3.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM2903PWRG3 گونجاوە بۆ 6 بەکارھێنانs: Industrial Voltage-Window Monitoring, Power-Supply Overvoltage Protection, Sensor Threshold Conditioning, Industrial Control Interlocks, Battery Pack Limit Detection, Logic-Level Signal Conditioning.
Industrial Voltage-Window Monitoring
The LM2903PWRG3 is well suited to industrial voltage-window monitoring because it combines two independent differential comparator channels with a 2 V to 36 V single-supply operating range. According to the Texas Instruments LM2903 product information, one channel can establish an upper threshold while the other establishes a lower threshold, allowing the system to detect both undervoltage and overvoltage conditions. Each open-collector output can feed a pull-up and a controller input. Design the divider networks so both sensed voltages remain inside the comparator's input common-mode range, and add hysteresis where supply ripple or switching noise could otherwise cause repeated transitions near each threshold.
پێشنیارکراو
Power-Supply Overvoltage Protection
The LM2903PWRG3 can monitor a power rail and assert a protection signal when the measured voltage crosses a programmed limit. Its two independent channels permit comparison of the rail against a reference or against another divided voltage, while its 2 V to 36 V supply range supports a broad range of industrial and control supply levels. The open-collector output should be pulled up to the voltage expected by the shutdown controller, and the pull-up resistor must be chosen for the available sink current. Account for input offset, reference tolerance, and resistor accuracy when setting the trip point so nominal system variation does not cause false protection events.
پێشنیارکراو
Sensor Threshold Conditioning
The LM2903PWRG3 can convert an analog sensor signal into a logic decision when its level must be referenced to another voltage. According to the Texas Instruments LM2903 product information, the device consists of two independent voltage comparators and supports single-supply operation from 2 V to 36 V. Use the differential inputs to compare a divided sensor output with a stable threshold, then use the open-collector channel with a pull-up to drive a digital input. Keep sensor traces away from switching nodes, provide a local supply bypass capacitor, and verify the common-mode range across the complete sensor and threshold ranges.
پێشنیارکراو
Industrial Control Interlocks
The two-channel architecture of the LM2903PWRG3 supports compact interlocks in industrial control systems where two conditions must be checked independently. The first channel can evaluate a permissive signal and the second can evaluate a process-enable or safety-related status voltage. Its 2 V to 36 V supply range is useful across conventional industrial control rails, and the open-collector outputs can be wired to controller inputs through suitable pull-up resistors. Because the two channels are electrically independent, fault propagation between them is reduced, although the shared supply still requires normal decoupling and verified operating limits.
پێشنیارکراو
Battery Pack Limit Detection
The LM2903PWRG3 can support upper and lower battery-limit detection when the monitored battery voltage falls within the device's electrical operating range, or when a divider brings that voltage into the comparator input range. According to the Texas Instruments LM2903 product information, the dual differential architecture can evaluate two thresholds independently. The open-collector outputs permit the detector to remain active-low, which is useful with pulled-up controller inputs. Account for battery chemistry, cutoff hysteresis, resistor tolerances, and temperature drift so that the decision thresholds reflect the intended cell limits rather than normal measurement variation.
پێشنیارکراو
Logic-Level Signal Conditioning
The LM2903PWRG3 can translate low-level analog comparisons into open-collector logic events for TTL, CMOS, MOS, and other compatible receiving circuits. According to the Texas Instruments LM2903 product information, each channel compares differential inputs and provides an open-collector output that requires an external pull-up for a logic-high state. This arrangement is useful when a sensor, divider, or reference produces a decision signal that must remain electrically isolated from the logic rail. Select the pull-up voltage and resistance carefully, and test the complete network for rise time, noise immunity, and output-level compliance.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM2903PWRG3 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM2903PWR | LM2903YPT | LM2903PT | LM2903PWRG4 |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-TSSOP (PW) | 8-TSSOP (PW) - same | 8-TSSOP (PW) - same | 8-TSSOP (PW) - same | 8-TSSOP (PW) - same |
| Comparator Elements | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Comparator Type | Differential | Differential | Differential | Differential | Differential |
| Output Type | Open collector | Open collector | Open collector | Open collector | Open collector |
| Single-Supply Voltage Range | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V | ±1 V to ±18 V |
| Logic Interface Support | CMOS, MOS, open-collector, and TTL | CMOS, MOS, open-collector, and TTL | CMOS, MOS, open-collector, and TTL | CMOS, MOS, open-collector, and TTL | CMOS, MOS, open-collector, and TTL |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
جیاکەرەوە سەرەکییەکان
- Combines two independent differential channels in one TSSOP package (بەراورد بەLM2903PWR)
- Supports wide single- and dual-supply operation (بەراورد بەLM2903YPT)
- Open-collector outputs support flexible logic interfacing (بەراورد بەLM2903PT)
تێبینییەکانی دیزاین
Route the differential inputs as a compact, shielded pair and keep them away from switching-node copper, relay contacts, and the pull-up return path. The LM2903 compares low-level signals, so long parallel input traces can couple adjacent-channel noise into the decision point. Place the input-divider or reference components close to the relevant pins, use a common ground reference, and provide a local supply bypass capacitor close to the device supply pin. The 8-TSSOP layout is compact, so component placement and return-current control materially affect usable decision accuracy.
Design the open-collector outputs with the receiving logic voltage in mind. The output transistor pulls the node down; it does not actively source a logic-high level. Select each pull-up resistor using the maximum required sink current, the highest permissible pull-up voltage, and the required rising-edge rate. A smaller pull-up improves rise time but increases sink current, while a larger pull-up reduces loading but can create slow edges and greater susceptibility to capacitive noise. Confirm that the resulting voltage and current remain within the comparator and downstream-device limits.
Do not treat the 2 V to 36 V supply capability as permission to place any signal directly on the comparator inputs. Input common-mode limits, input offset, and output-state requirements must be checked in the manufacturer datasheet for the selected ordering grade. Also verify dual-supply polarity and the total voltage between the supply rails. For threshold detection, add deliberate hysteresis or filtering when the monitored signal contains ripple; otherwise, the output can repeatedly switch even though the average voltage remains near the threshold.
زانیاری پابەندبوون
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated in the manufacturer and distributor information. The LM2903 family is described as a general-purpose dual differential comparator, but its compliance status must be confirmed for the exact ordering code.