LMR822F-GE2 - Dual 5.5MHz RRO Op Amp | ROHM Semiconductor
MPN: LMR822F-GE2 ✓ چالاکLMR822F-GE2 گشتی
An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, or control analog signals. The LMR822F belongs to the general-purpose operational-amplifier family within analog ICs and the broader signal-conditioning hierarchy. In portable battery-powered equipment, a low-voltage dual amplifier can process two signals or implement a differential stage while reducing package count and board area compared with two single amplifiers.
The LMR822F's 5.5 MHz gain-bandwidth product supports closed-loop operation at moderate signal frequencies, while its 2 V/us slew rate improves large-signal response. Rail-to-rail output operation allows the output to approach the available supply rails more closely than a conventional fixed-output amplifier, which is useful when signal headroom is limited. Low supply-current consumption further supports mobile and other battery-powered applications.
The dual-channel architecture provides two amplifiers in one 8-SOP package. Each channel can be configured as an inverting amplifier, non-inverting amplifier, voltage follower, comparator-like interface, or active-filter stage, subject to the stability, common-mode, and output-swing limits in the manufacturer datasheet. This flexibility makes the device useful in active filters, sensor interfaces, touch-screen control, audio signal conditioning, and low-voltage industrial systems.
Typical applications include portable audio input stages, resistive touch-sensing channels, buffered sensor outputs, active low-pass filters, and low-voltage industrial control boards. The 2.5 V minimum supply supports systems operating from a regulated 3.3 V rail, while the 5.5 V maximum supply accommodates 5 V analog rails. Engineers should confirm frequency, gain, output swing, input range, noise, and stability requirements for the intended configuration.
For dependable implementation, keep input and feedback connections short, place compensation or filter components close to the relevant pins, and avoid operating the amplifier beyond its stated 2.5 V to 5.5 V supply range. Verify each channel independently because dual packages share common supply and ground connections.
This product page combines the manufacturer's core operating specifications with application guidance, package information, sourcing support, and an engineering comparison of relevant alternatives. It helps designers identify whether the LMR822F-GE2's dual 5.5 MHz architecture is suitable before beginning PCB implementation.
جێگرەوەکانی جێگۆڕکێ بۆ LMR822F-GE2 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LMR822F-GE2 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.
LMR821G-GE2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LMR824F-GE2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →LMR822G-GE2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LMR822F-GE2 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Number of Amplifier Channels | 2 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Gain-Bandwidth Product | 5.5 MHz |
| Slew Rate | 2 V/us |
| Output Architecture | Rail-to-rail output |
| مەودای پلەی گەرمیی کارکردن | -40 C to +85 C |
| پاکێج | 8-SOP |
| جۆری دامەزراندن | Surface mount |
| Device Classification | Standard general-purpose amplifier |
| Output Swing | Full swing |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
ڕێنمایی ڕێکخستنی پینی LMR822F-GE2 8-sop
ڕێکخستنی پین بۆ LMR822F-GE2 (پاکێجی 8-sop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LMR822F-GE2.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LMR822F-GE2 گونجاوە بۆ 6 بەکارھێنانs: Portable Audio Signal Conditioning, Resistive Touch Sensing, Low-Voltage Active Filters, Battery-Powered Sensor Buffering, Industrial Control Interfaces, Low-Voltage Data Acquisition.
Portable Audio Signal Conditioning
The LMR822F-GE2 fits portable audio signal-conditioning stages because each channel can provide gain and buffering within a 2.5 V to 5.5 V supply system. Its 5.5 MHz gain-bandwidth product supports signals well above most low-rate audio bandwidths, while the 2 V/us slew rate helps maintain low distortion when processing moderate-amplitude transients. The dual 8-SOP package reduces board area by combining two amplifier functions in one component. Rail-to-rail output operation provides useful signal swing on a 3.3 V rail, although the design must remain within the datasheet's output-voltage and load-current limits.
پێشنیارکراو
Resistive Touch Sensing
The LMR822F-GE2 can support two resistive touch-sensing channels because it contains two amplifier channels and operates from a low 2.5 V minimum supply. The 5.5 MHz gain-bandwidth product is adequate for processing touch-controller signals within an active-filter or buffer stage, and the 2 V/us slew rate provides a responsive transition capability. Rail-to-rail output behavior is useful when the controller must exercise a narrow voltage range near the supply rails. Touch-system performance still depends on electrode resistance, noise, settling time, and the specific sensor-front-end topology.
پێشنیارکراو
Low-Voltage Active Filters
The LMR822F-GE2 is appropriate for active-filter implementations where two amplifier sections are required in an 8-SOP package. Its 5.5 MHz gain-bandwidth product provides bandwidth above the operating range of many low-frequency sensor filters, while the 2 V/us slew rate supports signal transitions that are more demanding than a slow-precision filter alone would require. The 2.5 V to 5.5 V supply range allows operation from common low-voltage rails. Component selection must preserve loop gain and stability at the target closed-loop gain, including the effect of the amplifier output impedance and load capacitance.
پێشنیارکراو
Battery-Powered Sensor Buffering
The LMR822F-GE2 suits battery-powered sensor buffering because its low-voltage operation begins at 2.5 V and its dual-channel configuration can condition two sensor outputs in one package. The 5.5 MHz gain-bandwidth product provides ample bandwidth for common temperature, pressure, and resistive sensors, while the 2 V/us slew rate allows the amplifier to follow sensor transitions with limited distortion. Low supply-current consumption is explicitly identified as a product feature, making power budget an important selection criterion. The final design should account for sensor excitation, input offset, noise, and the load presented to the source.
پێشنیارکراو
Industrial Control Interfaces
The LMR822F-GE2 can serve as a dual amplifier in compact industrial control interfaces that operate from 2.5 V to 5.5 V. One channel may buffer a sensor input while the other amplifies a feedback or control signal, and the 8-SOP package limits board-space demand. Its 5.5 MHz gain-bandwidth product and 2 V/us slew rate provide useful dynamic performance for control signals and active filtering. Because industrial environments may contain fast transients, the amplifier should be paired with suitable input protection, grounding, and filtering, while maintaining its specified operating temperature of -40 C to +85 C.
پێشنیارکراو
Low-Voltage Data Acquisition
The LMR822F-GE2 is suitable for conditioning two low-voltage acquisition channels in compact data-conversion systems. Its 5.5 MHz gain-bandwidth product can support anti-alias or active-filter stages ahead of a converter, and the 2 V/us slew rate helps reproduce moderate-amplitude input transitions without requiring a larger high-speed amplifier. Rail-to-rail output behavior is advantageous when converter input ranges make efficient use of a 3.3 V or 5 V analog rail. The actual signal-chain bandwidth must remain comfortably below the closed-loop limits of the selected gain configuration.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LMR822F-GE2 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LMR821G-GE2 | LMR824F-GE2 | LMR822G-GE2 |
|---|---|---|---|---|
| Package | 8-SOP | 8-SOP | 8-SOP | 8-SOP |
| Brand | ROHM Semiconductor | ROHM Semiconductor | ROHM Semiconductor | ROHM Semiconductor |
| Amplifier Channels | 2 circuits | 1 circuit | 2 circuits | 2 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V | 2.5 V to 5.5 V |
| Output Architecture | Rail-to-rail output | Full-swing output | Rail-to-rail output | Rail-to-rail output |
جیاکەرەوە سەرەکییەکان
- Combines two amplifier channels in one low-voltage package (بەراورد بەLMR821G-GE2)
- Provides a defined 5.5 MHz gain-bandwidth product and 2 V/us slew rate (بەراورد بەLMR824F-GE2)
- Operates across common low-voltage rails with rail-to-rail output (بەراورد بەLMR822G-GE2)
تێبینییەکانی دیزاین
Use short, direct routing for each amplifier's input and feedback components. A 5.5 MHz gain-bandwidth product gives useful bandwidth, but parasitic capacitance and long feedback traces can alter phase margin, particularly at high closed-loop gain. Keep sensitive inputs away from power-supply nodes and switching nodes, and place filter or compensation components close to the associated pins.
Decouple the 2.5 V to 5.5 V supply close to the 8-SOP with a local ceramic bypass capacitor and adequate bulk capacitance for the board's load transients. Because both amplifier channels share the same package supplies, supply disturbance can affect both channels simultaneously. Verify ground-return paths so output-current flow does not add noise to the input-reference voltage.
Do not assume that a matching 8-SOP footprint guarantees a functional substitution. Before using LMR821G-GE2, LMR824F-GE2, or LMR822G-GE2, verify pin assignments, amplifier-channel count, input common-mode range, output swing, offset voltage, bias current, noise, gain, stability, and absolute-maximum ratings against the target design.
Treat the two channels as separate analog paths even though they share one package and supply. Maintain symmetrical grounding where channel matching matters, avoid routing one channel's output near the other channel's high-impedance input, and test each amplifier independently. Rail-to-rail output behavior provides more signal range on low-voltage rails, but the usable range still depends on load current and output swing.
زانیاری پابەندبوون
ROHM declarations or qualification records were not present in the cited product information, so each compliance field remains unknown pending manufacturer documentation.