LT1014AMJ - Quad Precision Op Amp | Analog Devices
MPN: LT1014AMJ ✓ چالاکLT1014AMJ گشتی
A precision operational amplifier is a voltage-feedback amplifier optimized for low offset voltage, low input bias current, high open-loop gain, and predictable output behavior. The LT1014 family belongs to the broader hierarchy of operational amplifier, analog amplifier, analog integrated circuit, and semiconductor categories. Its precision characteristics make it suitable for conditioning weak sensor signals while its single-supply capability helps simplify dual-rail instrumentation.
Key features include low offset-voltage temperature coefficient, high gain, low supply current, and low noise. These characteristics are important in strain-gauge, thermocouple, and current-loop systems because they reduce measurement error near the signal floor. Operation from a single 5 V supply also allows the device to work in compact battery-powered instruments where one supply rail may be available.
The LT1014 combines four amplifiers in one 14-pin industry-standard configuration, reducing the component count in multichannel measurement systems. Its input range extends to ground, which is valuable for sensors that produce signals near zero volts. The manufacturer documentation also identifies operation from ±15 V and single 5 V supplies, covering both traditional laboratory instrumentation and lower-voltage embedded measurement equipment.
Typical applications include battery-powered precision instruments, strain-gauge signal conditioners, thermocouple amplifiers, instrumentation amplifiers, 4 mA to 20 mA current-loop transmitters, multiple-limit threshold detectors, and active filters. These uses benefit from the amplifier family’s combination of precision, low noise, low supply current, and flexible supply-voltage support.
When laying out a circuit, keep input and feedback components close to their associated amplifier pins and provide suitable bypassing on each supply rail. Check input common-mode limits, output swing, and stability requirements at the selected supply voltage before committing the layout.
This product page organizes the LT1014AMJ specifications, package information, sourcing guidance, comparison details, and practical design notes into a focused engineering reference for precision analog signal-chain design.
جێگرەوەکانی جێگۆڕکێ بۆ LT1014AMJ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LT1014AMJ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Current.
LT1014MJB
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LT1014MJ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LT1014CJ
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LT1014AMJ#PBF
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
FT1014IN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LT1014AMJ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Quad precision operational amplifier |
| Number of Amplifier Circuits | 4 circuits |
| پاکێج | 14-pin CERDIP |
| ژمارەی پین | 14 pins |
| Supported Supply Configuration | ±15 V and single 5 V |
| Single-Supply Voltage | 5 V |
| Dual-Supply Voltage | ±15 V |
| Input Range | Extends to ground |
| جۆری دامەزراندن | Through-hole |
ڕێنمایی ڕێکخستنی پینی LT1014AMJ 14-pin cerdip
ڕێکخستنی پین بۆ LT1014AMJ (پاکێجی 14-pin cerdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LT1014AMJ.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LT1014AMJ گونجاوە بۆ 6 بەکارھێنانs: Battery-Powered Precision Instruments, Strain-Gauge Signal Conditioning, Thermocouple Amplifier, 4 mA to 20 mA Current-Loop Transmitter, Instrumentation Amplifier, Active Filters and Threshold Detection.
Battery-Powered Precision Instruments
The LT1014AMJ fits battery-powered precision instruments because the LT1014 family combines four precision amplifier circuits with low supply current and single 5 V operation. Placing four amplifiers in one 14-pin CERDIP package reduces board area and component count in portable measurement systems. Its low offset-voltage temperature coefficient, high gain, and low noise help preserve accuracy as the supply voltage, temperature, and input level vary. The input range extending to ground is particularly useful for sensors with zero-volt-centered outputs. In a portable analyzer, four channels could amplify sensor, reference, or feedback signals while maintaining a common operating point.
پێشنیارکراو
Strain-Gauge Signal Conditioning
The LT1014AMJ is suited to strain-gauge signal conditioning because its four precision operational amplifiers can form low-level gain stages while maintaining low offset drift and low noise. A strain bridge produces a small differential voltage, so minimizing input-referred errors helps protect measurement resolution. The low offset-voltage temperature coefficient limits sensitivity to ambient changes, while the high-gain architecture supports the amplification required by instrumentation front ends. Four packaged amplifiers can also support bridge excitation, differential input, gain, and active filtering without requiring four separate packages.
پێشنیارکراو
Thermocouple Amplifier
The LT1014AMJ can serve as a building block in thermocouple amplification because thermocouple signals are small and require low-offset, low-noise, high-gain signal handling. The device's precision characteristics help reduce errors relative to the millivolt-level sensor output, while its input range extending to ground supports signals near the lower rail. Four circuits allow a designer to implement differential input, gain, filtering, and compensation stages within one package. The complete thermocouple circuit must still include cold-junction compensation and protection appropriate for the sensor and industrial environment.
پێشنیارکراو
4 mA to 20 mA Current-Loop Transmitter
The LT1014AMJ fits 4 mA to 20 mA current-loop transmitter signal conditioning because the manufacturer identifies this application for the LT1014 family. The amplifier's high gain and low offset-voltage temperature coefficient support accurate conditioning of sensor-derived voltages, while low noise and low supply current help preserve the usable loop signal. Four amplifier circuits can provide input amplification, error amplification, output drive assistance, and filtering in a multi-stage transmitter design. The final loop current, compliance voltage, bandwidth, and isolation requirements must be verified against the complete transmitter architecture.
پێشنیارکراو
Instrumentation Amplifier
The LT1014AMJ is useful in instrumentation-amplifier designs where a small differential signal must be amplified accurately before digitization or transmission. Its low offset-voltage temperature coefficient limits drift, its high gain supports the required amplification, and its low noise improves the signal-to-noise ratio of the measurement chain. Four amplifier circuits provide flexibility for a classic three-amplifier topology plus an additional buffer or active-filter stage. Input bias current, common-mode range, output swing, and stability at the selected gain must be checked against the sensor source impedance and 5 V or ±15 V operating condition.
پێشنیارکراو
Active Filters and Threshold Detection
The LT1014AMJ supports active-filter and threshold-detection circuits because each of its four precision amplifier channels can implement independent analog functions. The high gain and low offset-voltage temperature coefficient are useful in filters where component tolerances should not dominate the transfer function, while low noise supports low-level condition detection. Multiple limit detectors can be built without multiple packages, simplifying channel count and keeping related circuitry in one thermal environment. Component selection for gain-setting resistors, capacitors, and comparators must preserve the intended passband and switching thresholds.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LT1014AMJ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
Consider LT1014MJB, LT1014MJ, or LT1014CJ when a documented ordering-code or temperature-grade difference fits the design, but verify the exact limits before substitution. LT1014AMJ#PBF can be evaluated when its ordering and finish code meet the production requirements. FT1014IN is the cross-brand candidate to review when a second-source arrangement is needed. Its basic four-circuit, 14-pin architecture supports drop-in consideration, but its offset, noise, supply, temperature, and stability ratings require direct comparison. For designs needing only two amplifiers, LT1013 offers a different channel count and should be evaluated separately rather than treated as a package-identical replacement.
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LT1014MJB | LT1014MJ | LT1014CJ | LT1014AMJ#PBF | FT1014IN |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Force Technologies |
| Package | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP |
| Amplifier Circuit Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
جیاکەرەوە سەرەکییەکان
- Four precision amplifier circuits in one ceramic-DIP package (بەراورد بەLT1013)
- Single 5 V and dual ±15 V supply support (بەراورد بەFT1014IN)
- Input operation extending to ground (بەراورد بەLT1014CJ)
- Precision features tailored to measurement signals (بەراورد بەLM224J)
تێبینییەکانی دیزاین
Route each amplifier's input, feedback resistor, and compensation network close to the corresponding package pins to minimize parasitic capacitance and interference. Because the LT1014AMJ contains four amplifier circuits in one 14-pin CERDIP package, keep sensitive channels physically separated from noisy power and return paths where possible. Connect supply bypassing close to the device and maintain short, low-impedance ground returns.
Design the power rails for either single 5 V or dual ±15 V operation, as identified by the manufacturer documentation. Confirm input common-mode range and output swing at the selected supply voltage before closing the gain configuration. Decouple the supply pins locally, and avoid allowing input signals to exceed the amplifier's operating limits when supply sequencing is required.
Treat input-bias-current error and source impedance as part of the gain-error budget, especially for strain-gauge and thermocouple circuits whose source impedances can be high. Use the datasheet's input-bias-current and offset specifications to calculate the resulting error. Stable feedback-network component values and short input paths are important when operating at high closed-loop gain.
Do not assume that every LT1014 ordering suffix has identical temperature or grade limits. Before using an LT1014MJB, LT1014MJ, LT1014CJ, LT1014AMJ#PBF, or FT1014IN as a substitute, verify the ordering table, supply limits, common-mode range, output swing, and temperature range. Also confirm that the alternative's stability characteristics meet the selected gain and capacitive-load conditions.
زانیاری پابەندبوون
The target is a precision analog operational amplifier; AEC-Q100 qualification is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.