MCP3422A0-E/SN - 18-Bit Dual-Channel ADC | Microchip
MPN: MCP3422A0-E/SN ✓ چالاکMCP3422A0-E/SN گشتی
An analog-to-digital converter converts continuous analog voltage into a digital numerical code. The MCP3422 belongs to the delta-sigma ADC family, which uses delta-sigma modulation and digital filtering to deliver high resolution and excellent noise performance for precision measurement. Within the semiconductor hierarchy, it is an ADC, a data-converter IC, and a member of the broader power-management and signal-processing component category.
The MCP3422 provides two differential input channels, an on-board precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its sigma-delta architecture, I2C-compatible interface, and low-noise measurement characteristics suit sensors, instrumentation, industrial controls, and embedded systems requiring accurate conversion of small differential signals.
Conversion performance depends on the selected resolution, gain, sample rate, and configuration. The device supports resolutions up to 18 bits, while an A0 suffix identifies the specific configuration represented by MCP3422A0. The manufacturer describes the MCP3422 family as low-noise and high-accuracy, with conversion methods intended for precision rather than high-speed waveform acquisition.
Typical uses include bridge or ratiometric sensor measurement, current sensing, battery and power-system monitoring, process-control instrumentation, and low-level analog front ends. Differential inputs help reject common-mode noise when the source and return paths are routed together, while the internal reference simplifies designs that do not require an external reference.
For PCB implementation, use the manufacturer pin-description and layout guidance when assigning the eight SOIC connections. Keep analog inputs, reference connections, and decoupling paths compact, and route I2C clock and data lines away from sensitive analog traces. Confirm the selected conversion settings against the required input range, resolution, sample rate, and noise performance.
جێگرەوەکانی جێگۆڕکێ بۆ MCP3422A0-E/SN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MCP3422A0-E/SN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Differential Input Range, Conversion Rate, Input Architecture, Package, Resolution.
MCP3422A2-E/SN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP3422A3T-E/SN
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MCP3422A5-E/SN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MCP3422A0-E/SN زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| ADC Type | Delta-sigma (ΔΣ) |
| وردی | Up to 18 bits |
| Number of Channels | 2 channels |
| Input Type | Differential |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Interface | Two-wire I2C-compatible serial interface |
| پاکێج | 8-pin SOIC, 3.90 mm width |
| جۆری دامەزراندن | Surface mount |
| Packaging | Tube |
| پلەی گەرمیی کارکردن | -40°C to +85°C |
| Programmable Gain Amplifier Configuration | MUX-PGA-ADC |
| Number of Internal ADCs | 1 |
| دۆخی RoHS | Compliant |
| دۆخی چرخەی ژیان | Active |
ڕێنمایی ڕێکخستنی پینی MCP3422A0-E/SN 8-pin soic, 3.90 mm width
ڕێکخستنی پین بۆ MCP3422A0-E/SN (پاکێجی 8-pin soic, 3.90 mm width). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MCP3422A0-E/SN.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MCP3422A0-E/SN گونجاوە بۆ 6 بەکارھێنانs: Bridge Sensor Measurement, Battery Current Monitoring, Industrial Process Control, Precision Temperature Sensing, Environmental Monitoring, Low-Level Voltage Acquisition.
Bridge Sensor Measurement
The MCP3422A0-E/SN fits bridge-based pressure, load, and force sensors whose output is a small differential signal. Its two differential channels can measure complementary bridge signals, while the internal 2.048 V reference provides a convenient excitation and conversion reference. With resolution up to 18 bits, the ADC can preserve fine changes in bridge output, but the selected A0 gain, conversion rate, and input range must match the sensor excitation and full-scale output. Keep the bridge return paths together to minimize common-mode conversion error, place analog traces away from switching nodes, and use the manufacturer's reference-layout practices for sensitive sensor measurements.
پێشنیارکراو
Battery Current Monitoring
The MCP3422A0-E/SN can measure the differential voltage produced by a current-sense shunt in battery management and power-conversion systems. Differential input handling helps reject common-mode voltage on the high-current side, while up to 18-bit resolution supports fine measurement of shunt voltage. The 2.7 V to 5.5 V operating range permits use in systems with common 3.3 V or 5 V rails. Select the conversion and gain settings for the shunt’s millivolt output, account for the sense-path resistance, and place the shunt and ADC input path away from high-current switching nodes to prevent unwanted coupling.
پێشنیارکراو
Industrial Process Control
The MCP3422A0-E/SN is appropriate for slow industrial measurements such as pressure, temperature, valve position, and process-variable monitoring. Its delta-sigma ADC architecture favors precision and noise filtering rather than high-frequency waveform capture, while the I2C-compatible interface integrates naturally with embedded controllers. Two differential channels allow related measurements to share the converter when input range and timing permit. Designers should verify the configured sample rate against the control-loop requirement, protect inputs from industrial transients, and use a differential input filter close to the ADC to reject interference while retaining the desired signal bandwidth.
پێشنیارکراو
Precision Temperature Sensing
The MCP3422A0-E/SN can digitize the differential output of resistive temperature sensors, RTDs, or linearized temperature probes. Up to 18-bit resolution is useful when temperature changes produce relatively small voltage variations, and the two differential inputs can support two probe channels. The 2.048 V internal reference supports ratiometric excitation when the sensor and reference network are designed accordingly. For accurate results, confirm the A0 configuration’s gain and conversion schedule, eliminate thermocouple-style unwanted junction paths, and route the sensor return beside the signal trace so external interference appears equally on both inputs.
پێشنیارکراو
Environmental Monitoring
The MCP3422A0-E/SN suits embedded environmental monitoring systems that measure differential outputs from gas, humidity, pressure, or electrochemical sensors. The converter combines two input channels with low-noise, high-accuracy delta-sigma operation, while I2C communication reduces the number of host-controller connections. Its internal 2.048 V reference helps simplify compact sensor nodes, although ratiometric accuracy depends on how the sensor excitation and reference are implemented. Select the operating mode for the expected signal level, include protection against sensor transients, and isolate sensitive analog routing from radio, display, and power-converter sections of the board.
پێشنیارکراو
Low-Level Voltage Acquisition
The MCP3422A0-E/SN is useful for acquiring small bipolar or unipolar voltages in instrumentation, laboratory equipment, and embedded test systems. Differential inputs support measurement of signals around a local return, and resolution up to 18 bits provides high numerical density when the signal-to-noise ratio and reference quality are adequate. The internal 2.048 V reference reduces external component count, but users requiring calibrated absolute accuracy must include reference and gain errors in the error budget. Use short, guarded analog traces, add differential input filtering, and verify that the conversion time supports the required data rate before defining the system sampling schedule.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MCP3422A0-E/SN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MCP3422A2-E/SN | MCP3422A3T-E/SN | MCP3422A5-E/SN |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| ADC Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Resolution | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Input Configuration | Differential | Differential | Differential | Differential |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Digital Interface | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible |
| Configuration Code | A0 | A2 | A3T | A5 |
جیاکەرەوە سەرەکییەکان
- Two-channel differential measurement in one converter (بەراورد بەMCP3422A2-E/SN)
- Integrated 2.048 V reference simplifies precision designs (بەراورد بەMCP3422A3T-E/SN)
- Exact A0 configuration for designs standardized on this order code (بەراورد بەMCP3422A5-E/SN)
تێبینییەکانی دیزاین
Place the input and bypass capacitors close to their associated device pins and keep analog input traces short and away from switching nodes. For differential measurements, route the signal and return paths together so common-mode noise is rejected consistently. Use the manufacturer MCP3422 land pattern and pin-description table when defining the eight-pin SOIC footprint.
Choose the A0 conversion mode by input amplitude, required resolution, and acquisition time rather than resolution alone. The internal 2.048 V reference supports a differential range of ±2.048 V, but the selected gain and available input range must also accommodate the expected signal. Include reference accuracy, gain error, offset, and analog-filter noise in the end-to-end error budget.
Do not substitute a different MCP3422 configuration code solely because the headline resolution matches. Verify the A0, A2, A3T, or A5 conversion table, supported gain, timing, I2C command sequence, and operating-temperature limits. Confirm the package suffix separately: SN identifies the SOIC orderable variant, while MS and MC identify different package constructions.
A low-noise ADC cannot recover information corrupted before the conversion. Keep high-current paths, inductors, and switching regulators away from the analog inputs; maintain a continuous return plane; and filter each input close to the device. Differential routing improves rejection only when both inputs experience the same interference, so avoid asymmetrical input-trace lengths and termination.
زانیاری پابەندبوون
RoHS compliance and active lifecycle status are listed for the exact part. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation in the applicable manufacturer documentation.