MCP3422A0-E/SN - 18-Bit Dual-Channel ADC | Microchip
MPN: MCP3422A0-E/SN ✓ 啟用中MCP3422A0-E/SN 概覽
An analog-to-digital converter converts continuous analog voltage into a digital numerical code. The MCP3422 belongs to the delta-sigma ADC family, which uses delta-sigma modulation and digital filtering to deliver high resolution and excellent noise performance for precision measurement. Within the semiconductor hierarchy, it is an ADC, a data-converter IC, and a member of the broader power-management and signal-processing component category.
The MCP3422 provides two differential input channels, an on-board precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its sigma-delta architecture, I2C-compatible interface, and low-noise measurement characteristics suit sensors, instrumentation, industrial controls, and embedded systems requiring accurate conversion of small differential signals.
Conversion performance depends on the selected resolution, gain, sample rate, and configuration. The device supports resolutions up to 18 bits, while an A0 suffix identifies the specific configuration represented by MCP3422A0. The manufacturer describes the MCP3422 family as low-noise and high-accuracy, with conversion methods intended for precision rather than high-speed waveform acquisition.
Typical uses include bridge or ratiometric sensor measurement, current sensing, battery and power-system monitoring, process-control instrumentation, and low-level analog front ends. Differential inputs help reject common-mode noise when the source and return paths are routed together, while the internal reference simplifies designs that do not require an external reference.
For PCB implementation, use the manufacturer pin-description and layout guidance when assigning the eight SOIC connections. Keep analog inputs, reference connections, and decoupling paths compact, and route I2C clock and data lines away from sensitive analog traces. Confirm the selected conversion settings against the required input range, resolution, sample rate, and noise performance.
直接替換替代品,適用於 MCP3422A0-E/SN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3422A0-E/SN (相同外形與佔位) — 差異在於 Differential Input Range, Conversion Rate, Input Architecture, Package, Resolution.
MCP3422A2-E/SN
✅ 直接替換聯絡詢價
查看資料表 →MCP3422A3T-E/SN
✅ 直接替換📋 參考替代品(不在目錄中)
MCP3422A5-E/SN
✅ 直接替換聯絡詢價
查看資料表 →MCP3422A0-E/SN 最大額定值與電氣特性
| ADC Type | Delta-sigma (ΔΣ) |
| 解析度 | Up to 18 bits |
| Number of Channels | 2 channels |
| Input Type | Differential |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Interface | Two-wire I2C-compatible serial interface |
| 封裝 | 8-pin SOIC, 3.90 mm width |
| 安裝類型 | Surface mount |
| Packaging | Tube |
| 工作溫度 | -40°C to +85°C |
| Programmable Gain Amplifier Configuration | MUX-PGA-ADC |
| Number of Internal ADCs | 1 |
| RoHS 狀態 | Compliant |
| 生命週期狀態 | Active |
MCP3422A0-E/SN 8-pin soic, 3.90 mm width 腳位配置指南
MCP3422A0-E/SN(8-pin soic, 3.90 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3422A0-E/SN.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3422A0-E/SN 適用於 6 應用s: Bridge Sensor Measurement, Battery Current Monitoring, Industrial Process Control, Precision Temperature Sensing, Environmental Monitoring, Low-Level Voltage Acquisition.
Bridge Sensor Measurement
The MCP3422A0-E/SN fits bridge-based pressure, load, and force sensors whose output is a small differential signal. Its two differential channels can measure complementary bridge signals, while the internal 2.048 V reference provides a convenient excitation and conversion reference. With resolution up to 18 bits, the ADC can preserve fine changes in bridge output, but the selected A0 gain, conversion rate, and input range must match the sensor excitation and full-scale output. Keep the bridge return paths together to minimize common-mode conversion error, place analog traces away from switching nodes, and use the manufacturer's reference-layout practices for sensitive sensor measurements.
推薦
Battery Current Monitoring
The MCP3422A0-E/SN can measure the differential voltage produced by a current-sense shunt in battery management and power-conversion systems. Differential input handling helps reject common-mode voltage on the high-current side, while up to 18-bit resolution supports fine measurement of shunt voltage. The 2.7 V to 5.5 V operating range permits use in systems with common 3.3 V or 5 V rails. Select the conversion and gain settings for the shunt’s millivolt output, account for the sense-path resistance, and place the shunt and ADC input path away from high-current switching nodes to prevent unwanted coupling.
推薦
Industrial Process Control
The MCP3422A0-E/SN is appropriate for slow industrial measurements such as pressure, temperature, valve position, and process-variable monitoring. Its delta-sigma ADC architecture favors precision and noise filtering rather than high-frequency waveform capture, while the I2C-compatible interface integrates naturally with embedded controllers. Two differential channels allow related measurements to share the converter when input range and timing permit. Designers should verify the configured sample rate against the control-loop requirement, protect inputs from industrial transients, and use a differential input filter close to the ADC to reject interference while retaining the desired signal bandwidth.
推薦
Precision Temperature Sensing
The MCP3422A0-E/SN can digitize the differential output of resistive temperature sensors, RTDs, or linearized temperature probes. Up to 18-bit resolution is useful when temperature changes produce relatively small voltage variations, and the two differential inputs can support two probe channels. The 2.048 V internal reference supports ratiometric excitation when the sensor and reference network are designed accordingly. For accurate results, confirm the A0 configuration’s gain and conversion schedule, eliminate thermocouple-style unwanted junction paths, and route the sensor return beside the signal trace so external interference appears equally on both inputs.
推薦
Environmental Monitoring
The MCP3422A0-E/SN suits embedded environmental monitoring systems that measure differential outputs from gas, humidity, pressure, or electrochemical sensors. The converter combines two input channels with low-noise, high-accuracy delta-sigma operation, while I2C communication reduces the number of host-controller connections. Its internal 2.048 V reference helps simplify compact sensor nodes, although ratiometric accuracy depends on how the sensor excitation and reference are implemented. Select the operating mode for the expected signal level, include protection against sensor transients, and isolate sensitive analog routing from radio, display, and power-converter sections of the board.
推薦
Low-Level Voltage Acquisition
The MCP3422A0-E/SN is useful for acquiring small bipolar or unipolar voltages in instrumentation, laboratory equipment, and embedded test systems. Differential inputs support measurement of signals around a local return, and resolution up to 18 bits provides high numerical density when the signal-to-noise ratio and reference quality are adequate. The internal 2.048 V reference reduces external component count, but users requiring calibrated absolute accuracy must include reference and gain errors in the error budget. Use short, guarded analog traces, add differential input filtering, and verify that the conversion time supports the required data rate before defining the system sampling schedule.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3422A0-E/SN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3422A2-E/SN | MCP3422A3T-E/SN | MCP3422A5-E/SN |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| ADC Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Resolution | Up to 18 bits | Up to 18 bits | Up to 18 bits | Up to 18 bits |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Input Configuration | Differential | Differential | Differential | Differential |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Digital Interface | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible | Two-wire I2C-compatible |
| Configuration Code | A0 | A2 | A3T | A5 |
主要差異化特點
- Two-channel differential measurement in one converter (對比MCP3422A2-E/SN)
- Integrated 2.048 V reference simplifies precision designs (對比MCP3422A3T-E/SN)
- Exact A0 configuration for designs standardized on this order code (對比MCP3422A5-E/SN)
設計說明
Place the input and bypass capacitors close to their associated device pins and keep analog input traces short and away from switching nodes. For differential measurements, route the signal and return paths together so common-mode noise is rejected consistently. Use the manufacturer MCP3422 land pattern and pin-description table when defining the eight-pin SOIC footprint.
Choose the A0 conversion mode by input amplitude, required resolution, and acquisition time rather than resolution alone. The internal 2.048 V reference supports a differential range of ±2.048 V, but the selected gain and available input range must also accommodate the expected signal. Include reference accuracy, gain error, offset, and analog-filter noise in the end-to-end error budget.
Do not substitute a different MCP3422 configuration code solely because the headline resolution matches. Verify the A0, A2, A3T, or A5 conversion table, supported gain, timing, I2C command sequence, and operating-temperature limits. Confirm the package suffix separately: SN identifies the SOIC orderable variant, while MS and MC identify different package constructions.
A low-noise ADC cannot recover information corrupted before the conversion. Keep high-current paths, inductors, and switching regulators away from the analog inputs; maintain a continuous return plane; and filter each input close to the device. Differential routing improves rejection only when both inputs experience the same interference, so avoid asymmetrical input-trace lengths and termination.
合規資訊
RoHS compliance and active lifecycle status are listed for the exact part. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation in the applicable manufacturer documentation.