Microchip Technology

MCP3422A0-E/SN - 18-Bit Dual-Channel ADC | Microchip

MPN: MCP3422A0-E/SN ✓ פעיל
2.048 V Vdss 8-pin SOIC, 3.90 mm width Package
כמות הזמנה מינימלית: 1 |

MCP3422A0-E/SN סקירה

The Microchip Technology MCP3422A0-E/SN is a two-channel, low-noise, high-accuracy delta-sigma analog-to-digital converter with up to 18-bit resolution, differential inputs, a 2.048 V internal reference, and an 8-pin SOIC package. It operates from a single 2.7 V to 5.5 V supply and communicates through a two-wire I2C-compatible serial interface.

An analog-to-digital converter converts continuous analog voltage into a digital numerical code. The MCP3422 belongs to the delta-sigma ADC family, which uses delta-sigma modulation and digital filtering to deliver high resolution and excellent noise performance for precision measurement. Within the semiconductor hierarchy, it is an ADC, a data-converter IC, and a member of the broader power-management and signal-processing component category.

The MCP3422 provides two differential input channels, an on-board precision 2.048 V reference, and a differential input range of plus or minus 2.048 V. Its sigma-delta architecture, I2C-compatible interface, and low-noise measurement characteristics suit sensors, instrumentation, industrial controls, and embedded systems requiring accurate conversion of small differential signals.

Conversion performance depends on the selected resolution, gain, sample rate, and configuration. The device supports resolutions up to 18 bits, while an A0 suffix identifies the specific configuration represented by MCP3422A0. The manufacturer describes the MCP3422 family as low-noise and high-accuracy, with conversion methods intended for precision rather than high-speed waveform acquisition.

Typical uses include bridge or ratiometric sensor measurement, current sensing, battery and power-system monitoring, process-control instrumentation, and low-level analog front ends. Differential inputs help reject common-mode noise when the source and return paths are routed together, while the internal reference simplifies designs that do not require an external reference.

For PCB implementation, use the manufacturer pin-description and layout guidance when assigning the eight SOIC connections. Keep analog inputs, reference connections, and decoupling paths compact, and route I2C clock and data lines away from sensitive analog traces. Confirm the selected conversion settings against the required input range, resolution, sample rate, and noise performance.

חלופות תחליף ישיר עבור MCP3422A0-E/SN — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MCP3422A0-E/SN (אותו גורם צורה וטביעת רגל) — שונים ב Differential Input Range, Conversion Rate, Input Architecture, Package, Resolution.

Microchip Technology
Differential Input Range: -2.048 V to +2.048 V
Conversion Rate: 4 samples per second
Input Architecture: Differential
Microchip Technology
Conversion Rate: 3.75 samples/s
Input Architecture: Differential input
Package: 8-pin SOIC
Microchip Technology
Differential Input Range: +/-2.048 V
Conversion Rate: 4 sps
Input Architecture: Differential inputs

MCP3422A2-E/SN

✅ Drop-In
Microchip Technology
📦 8-SOIC
18 bit · 2 · Differential · Delta-sigma ADC · 4 samples per second · 2.048 V · -2.048 V to +2.048 V · 3.3 V or 5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP3422A3T-E/SN

✅ Drop-In
📦 8-SOIC
A3T configuration and temperature-grade code replace A0; shared headline specifications are 2 channels, differential inputs, up to 18-bit resolution, and 2.048 V internal reference

📋 חלופה להתייחסות (לא בקטלוג)

MCP3422A5-E/SN

✅ Drop-In
Microchip Technology
📦 8-SOIC
Delta-sigma ADC · 18 bit · 2 channels · Differential inputs · 4 sps · 2.048 V · +/-2.048 V · 2.7 V to 5.5 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MCP3422A0-E/SN דירוגים מרביים ומאפיינים חשמליים

ADC Type Delta-sigma (ΔΣ)
רזולוציה Up to 18 bits
Number of Channels 2 channels
Input Type Differential
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Supply Voltage Range 2.7 V to 5.5 V
Digital Interface Two-wire I2C-compatible serial interface
מארז 8-pin SOIC, 3.90 mm width
סוג הרכבה Surface mount
Packaging Tube
טמפרטורת פעולה -40°C to +85°C
Programmable Gain Amplifier Configuration MUX-PGA-ADC
Number of Internal ADCs 1
סטטוס RoHS Compliant
סטטוס מחזור חיים Active

מדריך תצורת פינים של MCP3422A0-E/SN 8-pin soic, 3.90 mm width

תצורת פינים עבור MCP3422A0-E/SN (מארזת 8-pin soic, 3.90 mm width). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin soic, 3.90 mm width עבור MCP3422A0-E/SN

אין נתוני פריסת פינים מפורטים עבור MCP3422A0-E/SN.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MCP3422A0-E/SN מתאים עבור 6 יישוםs: Bridge Sensor Measurement, Battery Current Monitoring, Industrial Process Control, Precision Temperature Sensing, Environmental Monitoring, Low-Level Voltage Acquisition.

🏭

Bridge Sensor Measurement

The MCP3422A0-E/SN fits bridge-based pressure, load, and force sensors whose output is a small differential signal. Its two differential channels can measure complementary bridge signals, while the internal 2.048 V reference provides a convenient excitation and conversion reference. With resolution up to 18 bits, the ADC can preserve fine changes in bridge output, but the selected A0 gain, conversion rate, and input range must match the sensor excitation and full-scale output. Keep the bridge return paths together to minimize common-mode conversion error, place analog traces away from switching nodes, and use the manufacturer's reference-layout practices for sensitive sensor measurements.

⚡

Battery Current Monitoring

The MCP3422A0-E/SN can measure the differential voltage produced by a current-sense shunt in battery management and power-conversion systems. Differential input handling helps reject common-mode voltage on the high-current side, while up to 18-bit resolution supports fine measurement of shunt voltage. The 2.7 V to 5.5 V operating range permits use in systems with common 3.3 V or 5 V rails. Select the conversion and gain settings for the shunt’s millivolt output, account for the sense-path resistance, and place the shunt and ADC input path away from high-current switching nodes to prevent unwanted coupling.

🏭

Industrial Process Control

The MCP3422A0-E/SN is appropriate for slow industrial measurements such as pressure, temperature, valve position, and process-variable monitoring. Its delta-sigma ADC architecture favors precision and noise filtering rather than high-frequency waveform capture, while the I2C-compatible interface integrates naturally with embedded controllers. Two differential channels allow related measurements to share the converter when input range and timing permit. Designers should verify the configured sample rate against the control-loop requirement, protect inputs from industrial transients, and use a differential input filter close to the ADC to reject interference while retaining the desired signal bandwidth.

🧩

Precision Temperature Sensing

The MCP3422A0-E/SN can digitize the differential output of resistive temperature sensors, RTDs, or linearized temperature probes. Up to 18-bit resolution is useful when temperature changes produce relatively small voltage variations, and the two differential inputs can support two probe channels. The 2.048 V internal reference supports ratiometric excitation when the sensor and reference network are designed accordingly. For accurate results, confirm the A0 configuration’s gain and conversion schedule, eliminate thermocouple-style unwanted junction paths, and route the sensor return beside the signal trace so external interference appears equally on both inputs.

🧩

Environmental Monitoring

The MCP3422A0-E/SN suits embedded environmental monitoring systems that measure differential outputs from gas, humidity, pressure, or electrochemical sensors. The converter combines two input channels with low-noise, high-accuracy delta-sigma operation, while I2C communication reduces the number of host-controller connections. Its internal 2.048 V reference helps simplify compact sensor nodes, although ratiometric accuracy depends on how the sensor excitation and reference are implemented. Select the operating mode for the expected signal level, include protection against sensor transients, and isolate sensitive analog routing from radio, display, and power-converter sections of the board.

🔧

Low-Level Voltage Acquisition

The MCP3422A0-E/SN is useful for acquiring small bipolar or unipolar voltages in instrumentation, laboratory equipment, and embedded test systems. Differential inputs support measurement of signals around a local return, and resolution up to 18 bits provides high numerical density when the signal-to-noise ratio and reference quality are adequate. The internal 2.048 V reference reduces external component count, but users requiring calibrated absolute accuracy must include reference and gain errors in the error budget. Use short, guarded analog traces, add differential input filtering, and verify that the conversion time supports the required data rate before defining the system sampling schedule.

What is the MCP3422A0-E/SN?
The MCP3422A0-E/SN is a two-channel, low-noise, high-accuracy delta-sigma ADC with differential inputs, up to 18-bit resolution, a 2.048 V internal reference, and a two-wire I2C-compatible interface. According to the Microchip Technology MCP3422 product information, it operates from a single 2.7 V to 5.5 V supply and is packaged in an 8-pin SOIC. It is intended for precision analog measurements rather than high-speed waveform capture.
What are the key specifications of MCP3422A0-E/SN that engineers should know?
The MCP3422A0-E/SN combines two differential input channels with up to 18-bit resolution, a 2.048 V internal reference, and a differential input range of ±2.048 V. The Microchip Technology product information identifies a 2.7 V to 5.5 V single-supply operating range and a two-wire I2C-compatible serial interface. Its 8-pin SOIC package and 3.90 mm body width support conventional surface-mount PCB assembly.
How do I download the MCP3422A0-E/SN datasheet PDF?
The official MCP3422 documentation is available through the Microchip Technology product page linked on this page, with the manufacturer PDF accessible from that page’s Documents and Resources section. The MCP3422A0-E/SN belongs to the MCP3422 family, so use the family datasheet and its package, electrical-characteristics, and pin-description sections when designing the circuit.
Where can I find the MCP3422A0-E/SN pinout?
Use the pin-description table and land-pattern drawing in the Microchip Technology MCP3422 family datasheet to locate the MCP3422A0-E/SN pinout. The device has eight SOIC pins. The pin table should be checked against the selected package, power connections, analog inputs, and I2C interface before PCB tracks or test points are assigned.
Where can I buy MCP3422A0-E/SN online?
Use the Request a Quote form on this page to request MCP3422A0-E/SN availability, current unit pricing, and lead time. The manufacturer product page confirms the MCP3422 family, while distributor records identify the exact MCP3422A0-E/SN orderable part. A quotation request allows the current channel, package suffix, and required quantity to be confirmed before ordering.
What is the price of MCP3422A0-E/SN?
The current price of MCP3422A0-E/SN depends on order quantity, channel, and market conditions. Submit the part number and required quantity through the Request a Quote form on this page for a current quotation. The platform does not present a static price because distributors can change pricing and inventory without notice.
What is the lead time for MCP3422A0-E/SN?
Lead time for MCP3422A0-E/SN should be confirmed for the requested quantity and shipping destination. Use the Request a Quote form on this page and provide the required tube, reel, or project quantity. Microchip Technology lists the MCP3422A0 family as active, but active lifecycle status does not by itself guarantee an immediate allocation for every quantity.
Is MCP3422A0-E/SN in stock?
Current MCP3422A0-E/SN stock is not represented by a fixed static value on this page. Request availability through the Request a Quote form with the required quantity and delivery location. The exact package suffix matters: the MCP3422A0-E/SN uses the SN package designation, while other package suffix combinations should be specified separately.
MCP3422A0-E/SN vs MCP3422A2-E/SN - which is better for precision sensing?
Choose MCP3422A0-E/SN when its documented A0 conversion and gain configuration matches the required measurement range and sample rate; choose MCP3422A2-E/SN when the A2 configuration better fits the signal. Both are identified as 18-bit, two-channel delta-sigma ADCs with differential inputs and a 2.048 V internal reference. The final choice requires comparing their complete datasheet configuration and acquisition-timing tables.
What is the difference between MCP3422A0-E/SN and MCP3422A2-E/SN?
Both MCP3422A0-E/SN and MCP3422A2-E/SN belong to the same two-channel, 18-bit-capable MCP3422 family and share the same basic precision delta-sigma architecture. Their principal difference is the A0 versus A2 configuration code, which can change supported gain, resolution, and timing options. Use the manufacturer conversion-configuration table to select the exact mode required by the application.
When should I choose MCP3422A0-E/SN over MCP3422A2-E/SN?
Choose MCP3422A0-E/SN when the A0 mode provides the required measurement range, resolution, and acquisition rate for the sensor signal. Choose MCP3422A2-E/SN when its configuration supports a more suitable gain or conversion schedule. Since both parts are 18-bit-capable, differential two-channel devices, the decision should be based on input amplitude and timing rather than headline resolution alone.
Is MCP3422A0-E/SN suitable for low-level differential sensor measurement?
The MCP3422A0-E/SN is suitable when the sensor output fits its ±2.048 V differential range or an appropriate supported gain mode. Its two differential channels, up to 18-bit resolution, and low-noise delta-sigma architecture suit bridge, pressure, temperature, and current-sensing front ends. Input common-mode limits, excitation noise, grounding, and conversion timing must still be checked.
What is the best drop-in replacement for MCP3422A0-E/SN?
The closest documented same-family option is MCP3422A2-E/SN, but it should be treated as a configuration-dependent substitute rather than an automatic equivalent. A drop-in decision requires the same 8-pin SOIC footprint, compatible I2C behavior, and matching resolution, gain, conversion-time, reference, and input-range requirements. Only MCP3422A2-E/SN has explicit cross-reference documentation in the available records.
Can MCP3422A2-E/SN replace MCP3422A0-E/SN?
MCP3422A2-E/SN can be considered only after its A2 configuration is confirmed to satisfy the original design. Cross-reference records identify it as the same MCP3422 two-channel, differential, 18-bit-capable family, but configuration codes may alter supported gain and timing. Verify the SOIC pinout, acquisition table, I2C command behavior, reference arrangement, and power requirements before substitution.
What is the best Microchip Technology equivalent for MCP3422A0-E/SN?
MCP3422A2-E/SN is the best documented same-family starting point because it appears directly in an MCP3422A0-E/SN comparison record and retains the two-channel differential ADC architecture. It is not automatically electrically identical across every mode, so review the manufacturer configuration and timing tables. No cross-brand replacement with verified pin-to-pin compatibility is documented in the available cross-reference records.

נתוני עזר הנדסיים עבור MCP3422A0-E/SN — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MCP3422A0-E/SN when the design has been qualified around the A0 conversion configuration, an 8-pin SOIC footprint, two differential channels, and a 2.048 V internal reference. Choose MCP3422A2-E/SN when its configuration supports the required gain, resolution, and conversion schedule. Consider MCP3422A3T-E/SN when its temperature-grade and acquisition characteristics match the environmental requirement. Choose MCP3422A5-E/SN when the A5 configuration better supports the measurement mode. Do not select among these parts by the shared “18-bit” headline alone: compare the complete conversion table, input range, timing, interface commands, and temperature limits. None should be treated as a drop-in choice until the manufacturer datasheet confirms the configuration and package behavior match the original design.

השוואה עם חלופות

פרמטר מוצר זה MCP3422A2-E/SN MCP3422A3T-E/SN MCP3422A5-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
ADC Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Resolution Up to 18 bits Up to 18 bits Up to 18 bits Up to 18 bits
Number of Channels 2 channels 2 channels 2 channels 2 channels
Input Configuration Differential Differential Differential Differential
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V
Digital Interface Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible Two-wire I2C-compatible
Configuration Code A0 A2 A3T A5

מבדילים עיקריים

  • Two-channel differential measurement in one converter (לעומתMCP3422A2-E/SN)
  • Integrated 2.048 V reference simplifies precision designs (לעומתMCP3422A3T-E/SN)
  • Exact A0 configuration for designs standardized on this order code (לעומתMCP3422A5-E/SN)

הערות תכנון

Place the input and bypass capacitors close to their associated device pins and keep analog input traces short and away from switching nodes. For differential measurements, route the signal and return paths together so common-mode noise is rejected consistently. Use the manufacturer MCP3422 land pattern and pin-description table when defining the eight-pin SOIC footprint.

Choose the A0 conversion mode by input amplitude, required resolution, and acquisition time rather than resolution alone. The internal 2.048 V reference supports a differential range of ±2.048 V, but the selected gain and available input range must also accommodate the expected signal. Include reference accuracy, gain error, offset, and analog-filter noise in the end-to-end error budget.

Do not substitute a different MCP3422 configuration code solely because the headline resolution matches. Verify the A0, A2, A3T, or A5 conversion table, supported gain, timing, I2C command sequence, and operating-temperature limits. Confirm the package suffix separately: SN identifies the SOIC orderable variant, while MS and MC identify different package constructions.

A low-noise ADC cannot recover information corrupted before the conversion. Keep high-current paths, inductors, and switching regulators away from the analog inputs; maintain a continuous return plane; and filter each input close to the device. Differential routing improves rejection only when both inputs experience the same interference, so avoid asymmetrical input-trace lengths and termination.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance and active lifecycle status are listed for the exact part. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation in the applicable manufacturer documentation.

חיפושים קשורים

MCP3422A0-E/SN datasheet MCP3422A0-E/SN specifications MCP3422A0-E/SN pinout MCP3422A0-E/SN datasheet pdf MCP3422A0 18-bit ADC MCP3422A0-E/SN equivalent MCP3422A0-E/SN replacement MCP3422A0-E/SN cross reference MCP3422A0-E/SN vs MCP3422A2-E/SN MCP3422A0-E/SN price MCP3422A0-E/SN stock Microchip MCP3422A0-E/SN MCP3422A0 differential input ADC MCP3422A0 SOIC pinout MCP3422A0 application circuit

רכיבים ומונחים קשורים

Microchip Technology MCP3422A0-E/SN MCP3422A2-E/SN MCP3422A3T-E/SN MCP3422A5-E/SN analog-to-digital converter ADC delta-sigma ADC sigma-delta modulator differential input precision data converter semiconductor I2C-compatible serial interface 2.048 V internal reference 18-bit resolution 2.7 V to 5.5 V power supply 8-pin SOIC SOIC package family surface-mount device bridge sensor measurement current-sense shunt industrial process control RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר