STM32F417ZGT6 - ARM Cortex-M4F MCU 1MB Flash 168MHz | STMicroelectronics
MPN: STM32F417ZGT6 ✓ چالاکSTM32F417ZGT6 گشتی
What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, combining the efficiency of the Cortex-M4 with a hardware floating-point unit (FPU) that accelerates single-precision math operations. This makes it ideal for digital signal processing (DSP) and control applications. In the system hierarchy, the STM32F417ZGT6 sits at the application processor level, integrating memory, clocking, and a rich set of peripherals on a single chip, reducing system cost and board space.
Key features include a 168 MHz maximum clock speed, 1 MB Flash, 192 KB SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs (2.4 MSPS), 2x DACs, 12-bit DAC, 2x I2C, 3x SPI, 4x USART, 2x UART, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, 1x camera interface, and a true random number generator (RNG). The FPU accelerates control algorithms and audio processing. The device also includes a memory protection unit (MPU) and a cryptographic acceleration cell for AES, DES, and 3DES.
Technically, the STM32F417ZGT6 is built on a 90nm process, offering a balance of performance and power consumption. It operates from 1.8V to 3.6V supply, with a wide temperature range of -40°C to +85°C (industrial grade). The device supports various low-power modes (Sleep, Stop, Standby) to optimize energy consumption in battery-powered applications. The advanced nested vectored interrupt controller (NVIC) ensures low-latency interrupt handling, critical for real-time control.
Typical applications include industrial motor control, medical devices, consumer electronics, IoT gateways, and audio processing. The Ethernet MAC and USB OTG enable connectivity, while the FPU and DSP instructions make it suitable for real-time audio and vibration analysis. The camera interface supports image capture for vision-based systems.
When designing with this MCU, ensure adequate decoupling on the VDD pins and a clean analog supply for the ADC. The internal RC oscillator is sufficient for many applications, but an external crystal is recommended for precise timing. The boot pins must be configured correctly to select the boot source (Flash, SRAM, or system memory).
جێگرەوەکانی جێگۆڕکێ بۆ STM32F417ZGT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32F417ZGT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, ADC, Communication Interfaces, SRAM, Supply Voltage.
STM32F407ZGT6
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$5.25 / یەکە
بینینی داتاشیت →STM32F417ZGT7
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F417ZGT6TR
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
STM32F427ZGT6
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →LPC4088FBD144
⚡ ھەمان پاکێج ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →STM32F417ZGT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Core | ARM Cortex-M4F with FPU |
| Max Clock Speed | 168 MHz |
| Flash Memory | 1 MB |
| SRAM | 192 KB |
| ڤۆڵتیەی دابینکردن | 1.8 V to 3.6 V |
| پاکێج | LQFP144 (20x20 mm) |
| پلەی گەرمیی کارکردن | -40C to +85C |
| ADC | 3x 12-bit, 2.4 MSPS |
| DAC | 2x 12-bit |
| Communication Interfaces | I2C, SPI, USART, UART, CAN, USB OTG, Ethernet MAC |
| GPIO Pins | 114 |
| Timers | 12x 16-bit, 2x 32-bit |
| DMA | 2x DMA controllers with 16 streams |
| RNG | True random number generator |
| Cryptographic Acceleration | AES, DES, 3DES |
| دۆخی RoHS | Compliant |
ڕێکخستنی پینی STM32F417ZGT6
| پین 1 | PE2 — GPIO or alternate function |
| پین 2 | PE3 — GPIO or alternate function |
| پین 3 | PE4 — GPIO or alternate function |
| پین 4 | PE5 — GPIO or alternate function |
| پین 5 | PE6 — GPIO or alternate function |
| پین 6 | VBAT — Battery backup supply |
| پین 7 | PC13 — GPIO or RTC output |
| پین 8 | PC14 — GPIO or OSC32_IN |
| پین 9 | PC15 — GPIO or OSC32_OUT |
| پین 10 | PF0 — GPIO or alternate function |
| پین 11 | PF1 — GPIO or alternate function |
| پین 12 | PF2 — GPIO or alternate function |
| پین 13 | PF3 — GPIO or alternate function |
| پین 14 | PF4 — GPIO or alternate function |
| پین 15 | PF5 — GPIO or alternate function |
| پین 16 | PF6 — GPIO or alternate function |
| پین 17 | PF7 — GPIO or alternate function |
| پین 18 | PF8 — GPIO or alternate function |
| پین 19 | PF9 — GPIO or alternate function |
| پین 20 | PF10 — GPIO or alternate function |
| پین 21 | VSS — Ground |
| پین 22 | VDD — Power supply |
| پین 23 | PF11 — GPIO or alternate function |
| پین 24 | PF12 — GPIO or alternate function |
| پین 25 | PF13 — GPIO or alternate function |
| پین 26 | PF14 — GPIO or alternate function |
| پین 27 | PF15 — GPIO or alternate function |
| پین 28 | PG0 — GPIO or alternate function |
| پین 29 | PG1 — GPIO or alternate function |
| پین 30 | PG2 — GPIO or alternate function |
| پین 31 | PG3 — GPIO or alternate function |
| پین 32 | PG4 — GPIO or alternate function |
| پین 33 | PG5 — GPIO or alternate function |
| پین 34 | PG6 — GPIO or alternate function |
| پین 35 | PG7 — GPIO or alternate function |
| پین 36 | PG8 — GPIO or alternate function |
| پین 37 | PG9 — GPIO or alternate function |
| پین 38 | PG10 — GPIO or alternate function |
| پین 39 | PG11 — GPIO or alternate function |
| پین 40 | PG12 — GPIO or alternate function |
| پین 41 | PG13 — GPIO or alternate function |
| پین 42 | PG14 — GPIO or alternate function |
| پین 43 | PG15 — GPIO or alternate function |
| پین 44 | VSS — Ground |
| پین 45 | VDD — Power supply |
| پین 46 | PD0 — GPIO or alternate function |
| پین 47 | PD1 — GPIO or alternate function |
| پین 48 | PD2 — GPIO or alternate function |
| پین 49 | PD3 — GPIO or alternate function |
| پین 50 | PD4 — GPIO or alternate function |
| پین 51 | PD5 — GPIO or alternate function |
| پین 52 | PD6 — GPIO or alternate function |
| پین 53 | PD7 — GPIO or alternate function |
| پین 54 | PD8 — GPIO or alternate function |
| پین 55 | PD9 — GPIO or alternate function |
| پین 56 | PD10 — GPIO or alternate function |
| پین 57 | PD11 — GPIO or alternate function |
| پین 58 | PD12 — GPIO or alternate function |
| پین 59 | PD13 — GPIO or alternate function |
| پین 60 | PD14 — GPIO or alternate function |
| پین 61 | PD15 — GPIO or alternate function |
| پین 62 | VSS — Ground |
| پین 63 | VDD — Power supply |
| پین 64 | PC0 — GPIO or ADC input |
| پین 65 | PC1 — GPIO or ADC input |
| پین 66 | PC2 — GPIO or ADC input |
| پین 67 | PC3 — GPIO or ADC input |
| پین 68 | PC4 — GPIO or ADC input |
| پین 69 | PC5 — GPIO or ADC input |
| پین 70 | PB0 — GPIO or ADC input |
| پین 71 | PB1 — GPIO or ADC input |
| پین 72 | PB2 — GPIO or alternate function |
| پین 73 | PB3 — GPIO or alternate function |
| پین 74 | PB4 — GPIO or alternate function |
| پین 75 | PB5 — GPIO or alternate function |
| پین 76 | PB6 — GPIO or alternate function |
| پین 77 | PB7 — GPIO or alternate function |
| پین 78 | PB8 — GPIO or alternate function |
| پین 79 | PB9 — GPIO or alternate function |
| پین 80 | PB10 — GPIO or alternate function |
| پین 81 | PB11 — GPIO or alternate function |
| پین 82 | PB12 — GPIO or alternate function |
| پین 83 | PB13 — GPIO or alternate function |
| پین 84 | PB14 — GPIO or alternate function |
| پین 85 | PB15 — GPIO or alternate function |
| پین 86 | VSS — Ground |
| پین 87 | VDD — Power supply |
| پین 88 | PA0 — GPIO or ADC input |
| پین 89 | PA1 — GPIO or ADC input |
| پین 90 | PA2 — GPIO or ADC input |
| پین 91 | PA3 — GPIO or ADC input |
| پین 92 | PA4 — GPIO or ADC input |
| پین 93 | PA5 — GPIO or ADC input |
| پین 94 | PA6 — GPIO or ADC input |
| پین 95 | PA7 — GPIO or ADC input |
| پین 96 | PA8 — GPIO or alternate function |
| پین 97 | PA9 — GPIO or alternate function |
| پین 98 | PA10 — GPIO or alternate function |
| پین 99 | PA11 — GPIO or alternate function |
| پین 100 | PA12 — GPIO or alternate function |
| پین 101 | PA13 — GPIO or SWDIO |
| پین 102 | PA14 — GPIO or SWCLK |
| پین 103 | PA15 — GPIO or alternate function |
| پین 104 | VSS — Ground |
| پین 105 | VDD — Power supply |
| پین 106 | PH0 — GPIO or OSC_IN |
| پین 107 | PH1 — GPIO or OSC_OUT |
| پین 108 | PH2 — GPIO or alternate function |
| پین 109 | PH3 — GPIO or alternate function |
| پین 110 | PH4 — GPIO or alternate function |
| پین 111 | PH5 — GPIO or alternate function |
| پین 112 | PH6 — GPIO or alternate function |
| پین 113 | PH7 — GPIO or alternate function |
| پین 114 | PH8 — GPIO or alternate function |
| پین 115 | PH9 — GPIO or alternate function |
| پین 116 | PH10 — GPIO or alternate function |
| پین 117 | PH11 — GPIO or alternate function |
| پین 118 | PH12 — GPIO or alternate function |
| پین 119 | PH13 — GPIO or alternate function |
| پین 120 | PH14 — GPIO or alternate function |
| پین 121 | PH15 — GPIO or alternate function |
| پین 122 | VSS — Ground |
| پین 123 | VDD — Power supply |
| پین 124 | PI0 — GPIO or alternate function |
| پین 125 | PI1 — GPIO or alternate function |
| پین 126 | PI2 — GPIO or alternate function |
| پین 127 | PI3 — GPIO or alternate function |
| پین 128 | PI4 — GPIO or alternate function |
| پین 129 | PI5 — GPIO or alternate function |
| پین 130 | PI6 — GPIO or alternate function |
| پین 131 | PI7 — GPIO or alternate function |
| پین 132 | PI8 — GPIO or alternate function |
| پین 133 | PI9 — GPIO or alternate function |
| پین 134 | PI10 — GPIO or alternate function |
| پین 135 | PI11 — GPIO or alternate function |
| پین 136 | PI12 — GPIO or alternate function |
| پین 137 | PI13 — GPIO or alternate function |
| پین 138 | PI14 — GPIO or alternate function |
| پین 139 | PI15 — GPIO or alternate function |
| پین 140 | VSS — Ground |
| پین 141 | VDD — Power supply |
| پین 142 | PE0 — GPIO or alternate function |
| پین 143 | PE1 — GPIO or alternate function |
| پین 144 | VSS — Ground |
بەکارهێنانە باوەکان
STM32F417ZGT6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Motor Control, IoT Gateway, Medical Device, Audio Processing, Consumer Electronics, Test and Measurement.
Industrial Motor Control
The STM32F417ZGT6 is ideal for industrial motor control due to its advanced timers with complementary PWM outputs, dead-time insertion, and fault inputs. The 168 MHz Cortex-M4F core with FPU accelerates field-oriented control (FOC) algorithms, enabling high-performance, real-time control of three-phase motors. The device's 12-bit ADCs (2.4 MSPS) provide precise current and voltage sensing, while the CAN interface supports industrial networking. In a typical application, the MCU generates PWM signals to drive an IGBT inverter, reads motor currents via ADCs, and executes FOC in real-time. The FPU reduces computation time for complex math, improving control loop frequency. Design considerations include proper isolation for high-voltage sections and thermal management for the MCU.
پێشنیارکراو
IoT Gateway
The STM32F417ZGT6 serves as a powerful IoT gateway, integrating Ethernet MAC, USB OTG, and multiple UART/SPI interfaces for connecting sensors and actuators. The 1 MB Flash and 192 KB SRAM support complex protocol stacks (e.g., MQTT, TCP/IP) and local data processing. The cryptographic acceleration cell enables secure communication via TLS/DTLS. In a typical gateway, the MCU collects data from sensors via UART/SPI, processes it, and transmits to the cloud via Ethernet or Wi-Fi (through an external module). The FPU accelerates data analytics, while the RNG ensures secure key generation. Design considerations include power supply stability and antenna placement for wireless modules.
پێشنیارکراو
Medical Device
The STM32F417ZGT6 is suitable for medical devices such as patient monitors and infusion pumps, where reliability and precision are critical. The 12-bit ADCs with 2.4 MSPS sample biosignals (ECG, SpO2) accurately, while the FPU processes filtering algorithms. The device's low-power modes extend battery life in portable devices. In a typical application, the MCU reads sensor data, performs digital filtering, and displays results on an LCD. The cryptographic acceleration ensures secure data logging. Design considerations include isolation for patient safety and compliance with medical standards (IEC 60601).
پێشنیارکراو
Audio Processing
The STM32F417ZGT6 excels in audio processing applications such as effects pedals, audio analyzers, and voice-controlled systems. The 168 MHz Cortex-M4F with FPU and DSP instructions handles real-time audio algorithms (filtering, FFT, compression) efficiently. The 2x 12-bit DACs provide analog audio output, while I2S (via SPI) interfaces with external codecs. In a typical application, the MCU reads audio samples from an ADC or I2S, processes them (e.g., equalization), and outputs via DAC. The FPU accelerates FFT for spectrum analysis. Design considerations include low-noise analog power supply and proper grounding to avoid audio artifacts.
پێشنیارکراو
Consumer Electronics
The STM32F417ZGT6 is used in consumer electronics like smart home hubs, wearables, and gaming peripherals. Its rich peripheral set (USB, SPI, I2C) enables connectivity to displays, sensors, and wireless modules. The 1 MB Flash supports complex user interfaces and firmware updates. In a typical smart home hub, the MCU manages Zigbee/Z-Wave modules via UART, controls lights via PWM, and communicates with a smartphone via BLE (through an external module). The FPU accelerates gesture recognition algorithms. Design considerations include power efficiency and EMI compliance.
پێشنیارکراو
Test and Measurement
The STM32F417ZGT6 is well-suited for test and measurement equipment such as data loggers, oscilloscopes, and spectrum analyzers. The high-speed ADCs (2.4 MSPS) capture fast signals, while the FPU processes FFTs for frequency analysis. The Ethernet and USB interfaces enable remote control and data transfer. In a typical data logger, the MCU samples multiple channels, stores data in Flash or external memory, and transmits via USB. The DMA controller offloads data transfer, ensuring continuous sampling. Design considerations include precise voltage references and shielding for noise-sensitive analog circuits.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ STM32F417ZGT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | STM32F407ZGT6 | STM32F417ZGT7 | STM32F417ZGT6TR | STM32F427ZGT6 | LPC4088FBD144 |
|---|---|---|---|---|---|---|
| Package | LQFP144 | LQFP144 - same | LQFP144 - same | LQFP144 - same | LQFP144 - same | LQFP144 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | NXP Semiconductors |
| Max Clock Speed | 168 MHz | 168 MHz | 168 MHz | 168 MHz | 180 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 2 MB | 512 KB |
| SRAM | 192 KB | 192 KB | 192 KB | 192 KB | 256 KB | 96 KB |
| Cryptographic Acceleration | Yes (AES, DES, 3DES) | No | Yes (AES, DES, 3DES) | Yes (AES, DES, 3DES) | Yes (AES, DES, 3DES) | No |
| RNG | Yes | No | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +105C | -40C to +85C | -40C to +85C | -40C to +85C |
جیاکەرەوە سەرەکییەکان
- Integrated cryptographic acceleration and RNG (بەراورد بەSTM32F407ZGT6)
- Higher clock speed and larger memory than NXP LPC4088 (بەراورد بەLPC4088FBD144)
- Pin-compatible upgrade path to STM32F427 (بەراورد بەSTM32F427ZGT6)
تێبینییەکانی دیزاین
The STM32F417ZGT6 requires a stable power supply. Use a 3.3V rail with adequate decoupling: place a 100nF ceramic capacitor near each VDD pin and a 4.7uF bulk capacitor at the power entry point. For the analog supply (VDDA), use a ferrite bead and a 1uF capacitor to filter noise. The VBAT pin should be connected to a backup battery or tied to VDD if not used.
For the LQFP144 package, ensure proper soldering with a 0.5mm pitch. Use a 4-layer PCB with a solid ground plane for best EMC performance. Keep high-speed signals (Ethernet, USB) away from the crystal oscillator and analog pins. Place the 8 MHz crystal and load capacitors close to the PH0/PH1 pins to minimize parasitic capacitance.
A common mistake is forgetting to configure the boot pins (BOOT0 and BOOT1). BOOT0 must be pulled low to boot from Flash, high to boot from system memory (for programming). Also, ensure the NRST pin has a 100nF capacitor to ground for reliable reset. Do not leave unused GPIO pins floating; configure them as outputs or enable internal pull-ups to avoid excessive current consumption.
زانیاری پابەندبوون
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified (industrial grade).