STMicroelectronics

STM32G474RCT6 - 170MHz Cortex-M4F MCU | STMicroelectronics

MPN: STM32G474RCT6 ✓ چالاک
64-LQFP (10 x 10 mm) Package 170 MHz Speed 256 KB Memory
MOQ: 1 |

STM32G474RCT6 گشتی

STMicroelectronics STM32G474RCT6 is a 32-bit Arm Cortex-M4F microcontroller with FPU operating up to 170 MHz, 256 KB of Flash memory, and a 64-LQFP (10 x 10 mm) package. It combines 128 KB of SRAM with a rich analog and digital peripheral set for compact industrial, communications, motor-control, and embedded control designs.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, communication interfaces, analog conversion blocks, timers, and GPIO into one component. The STM32G4 family targets the Cortex-M4F class of embedded processing, where the FPU accelerates floating-point calculations and the peripheral mix supports real-time control, data acquisition, and connected industrial equipment.

The STM32G474RCT6 provides up to 170 MHz processing performance, 213 DMIPS, and 256 KB of Flash. Its advertised feature set includes a high-resolution timer with 184 ps resolution and 12 channels, extensive math acceleration, and a 170 MHz Arm Cortex-M4 CPU. The STM32G474xB/xC/xE family datasheet also identifies 128 KB of SRAM and a rich analog peripheral set.

The device belongs to the STM32G4 performance-oriented microcontroller family and shares a 64-pin LQFP format across selected density and ordering options. This makes it appropriate for designs requiring meaningful arithmetic performance and mixed-signal control without moving to a larger-pin-count package. Firmware, peripherals, and software-migration requirements should be evaluated together because ordering suffixes and density variants can differ in memory capacity.

Typical uses include industrial motor-control equipment, digital power conversion, sensor-acquisition systems, communications equipment, and compact automation controllers. The Cortex-M4F core and math accelerators are useful for control-loop calculation, while the analog and timer resources support current sensing, waveform generation, and precise timing. The 64-LQFP package also remains practical for prototypes and designs assembled with conventional leaded-package inspection methods.

Designers should verify power-supply sequencing, decoupling, analog reference handling, clock configuration, and exposed-pin assignments against the official STM32G474xB STM32G474xC STM32G474xE datasheet before layout release. Because the supplied search record does not expose the complete pin table, every package pin should be cross-checked directly in the manufacturer documentation rather than inferred from the package name.

This page combines verified distributor and manufacturer information, same-footprint STM32G4 alternatives, application guidance, and design cautions. It is intended to help engineers identify whether the STM32G474RCT6 provides the required memory, processing speed, analog capability, and LQFP-64 footprint without relying on unsupported substitute assumptions.

جێگرەوەکانی جێگۆڕکێ بۆ STM32G474RCT6 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ STM32G474RCT6 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Flash Memory, Package, Core, Comparators, Operational Amplifiers.

STMicroelectronics
Package: LQFP-64 (10x10 mm)
Core: ARM Cortex-M4 with FPU
بەراوردکردن لەگەڵ STM32G474RCT6 →
STMicroelectronics
Flash Memory: 512 KB
Package: LQFP-64 (10x10 mm)
Core: ARM Cortex-M4F with FPU
بەراوردکردن لەگەڵ STM32G474RCT6 →
STMicroelectronics
Flash Memory: 128 KB
Package: 48-LQFP (7 mm x 7 mm)
Core: Arm Cortex-M4F
بەراوردکردن لەگەڵ STM32G474RCT6 →
STMicroelectronics
Flash Memory: 128 KB (128K x 8)
Package: 64-LQFP (10x10 mm)
Comparators: 7
بەراوردکردن لەگەڵ STM32G474RCT6 →
STMicroelectronics
Flash Memory: 128 KB (dual-bank)
Package: 64-pin LQFP (10x10 mm)
Core: Arm Cortex-M4F with FPU + DSP
بەراوردکردن لەگەڵ STM32G474RCT6 →
STMicroelectronics
Flash Memory: 512 KB
Package: 64-pin LQFP (10x10 mm)
Core: Arm Cortex-M4F with FPU and DSP instructions
بەراوردکردن لەگەڵ STM32G474RCT6 →

STM32G473RCT6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M4 with FPU · 170 MHz · 256 KB · 128 KB · 1.71 V to 3.6 V · LQFP-64 (10x10 mm) · -40C to +85C · 51

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM32G473RET6

✅ جێگرەوەی ڕاستەوخۆ
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M4F with FPU · 170 MHz · 512 KB · 128 KB · 1.71 V to 3.6 V · LQFP-64 (10x10 mm) · -40C to +85C · 51

✓ بەردەستە

$4.5938 / یەکە

بینینی داتاشیت →

STM32G474CBT6

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
32-bit ARM Cortex-M4F microcontroller · Arm Cortex-M4F · 170 MHz · Up to 213 DMIPS · 128 KB · 128K x 8 bits · 128 KB · 32-bit RISC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

STM32G474RBT6

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
Arm Cortex-M4F with FPU + DSP · 170 MHz · 213 · 128 KB (dual-bank) · 32 KB (data) · 4 KB · 1.71 V to 3.6 V · 64-pin LQFP (10x10 mm)

✓ بەردەستە

$3.7734 / یەکە

بینینی داتاشیت →

STM32G474RET6

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
Arm Cortex-M4F with FPU and DSP instructions · 170 MHz · 213 DMIPS · 512 KB · 128 KB · 1.71 V to 3.6 V · 64-pin LQFP (10x10 mm) · 12-bit, 5 MSPS, multiple channels

✓ بەردەستە

$8.25 / یەکە

بینینی داتاشیت →

STM32G474RCT6 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type 32-bit Arm Cortex-M4F microcontroller
CPU Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 170 MHz
Peak Performance 213 DMIPS
Flash Memory 256 KB
SRAM 128 KB
Program Memory Organization 256K x 8
High-Resolution Timer Resolution 184 ps
High-Resolution Timer Channels 12 channels
Architecture 32-bit RISC
پاکێج 64-LQFP (10 x 10 mm)
جۆری دامەزراندن Surface mount
Timer Resolution 184 ps, 12-channel high-resolution timer
Math Accelerator Present

ڕێنمایی ڕێکخستنی پینی STM32G474RCT6 64-lqfp (10 x 10 mm)

ڕێکخستنی پین بۆ STM32G474RCT6 (پاکێجی 64-lqfp (10 x 10 mm)). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 64-lqfp (10 x 10 mm) بۆ STM32G474RCT6

هیچ داتای وردی پینئاوت بەردەست نییە بۆ STM32G474RCT6.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

STM32G474RCT6 گونجاوە بۆ 6 بەکارھێنانs: Industrial Motor Control, Digital Power Conversion, Precision Data Acquisition, Communications Equipment, Digital Audio Control, Compact Automation Controller.

🏭

Industrial Motor Control

The STM32G474RCT6 fits compact industrial motor-control systems because its Arm Cortex-M4F core operates up to 170 MHz while providing 256 KB of Flash, 128 KB of SRAM, math acceleration, and a 184 ps, 12-channel high-resolution timer. These resources support current-control loops, encoder-related timing, PWM generation, and supervisory logic in one device. In a servo or stepper controller, the high-resolution timer can sharpen edge placement and reduce timing quantization. The 64-LQFP package also simplifies access to analog sensing and motor-driver interfaces during inspection, although the MCU cannot directly drive motor winding current; an external power stage remains required.

⚡

Digital Power Conversion

The STM32G474RCT6 is suitable for digital power-conversion control because its 170 MHz Cortex-M4F core can execute control calculations while the 256 KB Flash and 128 KB SRAM provide room for firmware, compensation, logging, and communication services. The family’s math accelerator and high-resolution timer are valuable in buck, boost, inverter, and PFC loops where deterministic switching edges affect conversion efficiency and regulation. In such a design, the MCU would sample current and voltage through supported analog resources, calculate the control command, and drive PWM through external power semiconductors. PCB partitioning, analog grounding, and power-supply sizing remain critical.

🔧

Precision Data Acquisition

The STM32G474RCT6 can serve as the processing engine for precision acquisition systems that combine analog sensing, digital filtering, and real-time data transfer. Its 170 MHz Arm Cortex-M4F performance and 128 KB SRAM allow local filtering and buffering, while 256 KB Flash accommodates firmware and fixed data structures. The family is described by STMicroelectronics as offering a rich analog peripheral set, making it appropriate for sensor conditioning and mixed-signal control when its supported ADC specifications meet the design requirements. For a bench instrument, the MCU can timestamp samples, run calibration logic, and relay results through an available communications peripheral; converter resolution and accuracy still require direct datasheet confirmation.

🌐

Communications Equipment

The STM32G474RCT6 is appropriate for communications-oriented control nodes that require real-time response, adequate local memory, and a compact package. The 170 MHz Cortex-M4F core can service protocol stacks and time-critical tasks, while 256 KB Flash and 128 KB SRAM support application firmware, packet buffers, and configuration data. In an industrial gateway or communications controller, the device could manage a serial interface, update configuration, monitor system status, and execute local control functions. The supplied verified data does not enumerate the specific peripheral variants, so interface count, transceiver compatibility, and protocol performance must be checked in the exact device documentation before schematic capture.

🎧

Digital Audio Control

The STM32G474RCT6 can act as the control processor in digital audio equipment where timing, local processing, and compact integration are important. Its Cortex-M4F floating-point capability supports audio-control calculations, and the 128 KB SRAM provides space for working buffers while 256 KB Flash holds control firmware. The MCU can manage configuration, button or encoder input, display control, and digital-audio routing around a dedicated codec. The family’s rich analog and timer resources may simplify synchronization, although actual audio-clock jitter and supported interface functions depend on the precise peripheral configuration. The external codec’s power, clock, and digital-bus requirements must be reconciled in the final reference design.

🖥️

Compact Automation Controller

The STM32G474RCT6 is a good match for compact automation controllers that combine sensor acquisition, timing, communications, and local decision logic. At 170 MHz, the Cortex-M4F core can execute control tasks while the 256 KB Flash and 128 KB SRAM reduce the need for external memory. A practical controller could read industrial inputs, operate timers, run sequence logic, and communicate status to a higher-level system. The 64-LQFP (10 x 10 mm) package is compact enough for control boards but still exposes numerous pins for digital and analog connections. Design qualification should include the device’s exact operating-temperature range, analog performance, EMC requirements, and functional-safety expectations, which are not specified in the supplied search record.

کورتەی بەرهەمە پێشنیارکراوەکان

What are the key specifications of STM32G474RCT6 that engineers should know?
The STM32G474RCT6 is a 170 MHz, 32-bit Arm Cortex-M4F microcontroller with 256 KB of Flash, 128 KB of SRAM, and a 64-LQFP (10 x 10 mm) package. According to the STMicroelectronics STM32G474xB/xC/xE family datasheet, it reaches 213 DMIPS and includes math acceleration plus a 184 ps, 12-channel high-resolution timer. These parameters make it suitable for real-time control, data acquisition, communications, and compact industrial systems requiring both digital processing and analog resources.
What is the operating frequency of the STM32G474RCT6?
The STM32G474RCT6 operates at up to 170 MHz using its 32-bit Arm Cortex-M4F core. According to the STMicroelectronics STM32G474xB STM32G474xC STM32G474xE family datasheet, the device delivers up to 213 DMIPS with floating-point acceleration through the Cortex-M4F FPU. Its clock tree, voltage scaling, and maximum operating frequency must be configured together, so the power-supply and clock settings should be verified in the relevant reference manual and datasheet sections.
How much Flash and SRAM does the STM32G474RCT6 have?
The STM32G474RCT6 provides 256 KB of Flash, organized as 256K x 8, and 128 KB of SRAM. The DigiKey listing confirms the 256 KB Flash configuration, while the official STMicroelectronics STM32G474xB/xC/xE family datasheet identifies 128 KB of SRAM. That combination is suitable for firmware, working buffers, control algorithms, and communication stacks on a single microcontroller, although the final memory budget depends on the selected linker map and application.
What package does the STM32G474RCT6 use?
The STM32G474RCT6 uses a 64-LQFP package measuring 10 x 10 mm. DigiKey and Mouser both identify the device as a 64-LQFP microcontroller, and STMicroelectronics lists the STM32G474RC family on its official product page. The 64-lead package supports compact PCB layouts while retaining individually accessible power, ground, clock, reset, analog, and communications pins; the complete pin table should be taken from the manufacturer documentation.
Where can I download the STM32G474RCT6 datasheet PDF?
The official STM32G474RCT6-family datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32g474cb.pdf. The document covers STM32G474xB, STM32G474xC, and STM32G474xE devices and includes family-level electrical, timing, package, and peripheral information. It should be used alongside the relevant reference manual for register details, and no independent datasheet mirror should replace the manufacturer document.
Where can I find the STM32G474RCT6 pinout?
The STM32G474RCT6 pinout is published in the package and pin-definition material for the STM32G474 family. The verified manufacturer resources identify the device as a 64-LQFP (10 x 10 mm) part, but the supplied search data does not include a complete numbered pin table. Use the STMicroelectronics STM32G474xB/xC/xE family datasheet and its package drawings to confirm every signal, especially power pins, ground pins, analog inputs, oscillator pins, and alternate-function mappings.
Where can I buy STM32G474RCT6 online?
STM32G474RCT6 can be found online through authorized distributors including DigiKey and Mouser. The DigiKey product page identifies it as an STMicroelectronics ARM Cortex-M4 microcontroller with 170 MHz operation and 256 KB of Flash, while Mouser provides a separate listing with inventory and pricing links. Because the supplied snippets do not contain a live unit price, quantity schedule, or confirmed stock quantity, request a current quote before committing the part to a production BOM.
What is the price of STM32G474RCT6?
A verified unit price for STM32G474RCT6 is not included in the supplied distributor records, so the current selling price cannot be stated reliably. DigiKey and Mouser provide product pages where live pricing can be checked, while Octopart compares availability and pricing across ten distributors. As of 2026-10-28, obtain the current price and minimum order quantity directly from the distributor because promotional pricing, stock, and volume breaks can change without notice.
What is the lead time for STM32G474RCT6?
The supplied DigiKey snippet says the STM32G474RCT6 ships today, indicating at least some present availability at the time of the captured search. However, no numerical manufacturer lead time or guaranteed stock quantity is supplied. As of 2026-10-28, confirm the exact quantity on hand, scheduled delivery date, and lifecycle status with the distributor before treating the part as available for a production schedule.
Is STM32G474RCT6 in stock?
STM32G474RCT6 was advertised as shippable today in the verified DigiKey result, but the record does not provide a quantified inventory level or a complete supplier list. The product is therefore not certified as continuously in stock. As of 2026-10-28, verify the live DigiKey, Mouser, or Octopart inventory for the required quantity, and allow procurement to account for distributor allocation changes.
What can replace the STM32G474RCT6?
The closest documented same-footprint replacements are other STM32G4 density or family options, including STM32G473RCT6, STM32G474CBT6, STM32G474RBT6, STM32G474RET6, and STM32G473RET6. They retain the Arm Cortex-M4-class architecture and LQFP-64 format, but Flash capacity, timer resources, peripheral details, or ordering code may differ. Firmware, pin-level support, memory layout, and application requirements must be reviewed before treating any candidate as a drop-in substitution.
Is the STM32G474RCT6 the same as the STM32G473RCT6?
The STM32G474RCT6 and STM32G473RCT6 are closely related STM32G4 devices, but they are not necessarily identical for every application. The cross-reference data explicitly associates STM32G473RCT6 with STM32G474RCT6, and both use the 64-LQFP format with a 170 MHz Cortex-M4-class core and 256 KB Flash. Their peripheral mix and device-specific functions must still be compared in the manufacturer documentation before replacing the part in production firmware.
STM32G474RCT6 vs STM32G473RCT6 — which is better for motor control?
Choose the STM32G474RCT6 when its additional STM32G4 family resources are required, and choose the STM32G473RCT6 when its verified peripheral set is sufficient and lower-cost sourcing is preferable. Both support 170 MHz Arm Cortex-M4 processing, 256 KB Flash, and a 64-LQFP footprint according to the available listings. The decision should be based on timer channels, math accelerators, analog resources, pin availability, and validated application-note support rather than clock speed alone.
When should I choose STM32G474RCT6 over another STM32G4 variant?
Choose STM32G474RCT6 when a design needs 170 MHz Cortex-M4F performance, 256 KB of Flash, and 128 KB of SRAM in a 64-LQFP package. Select a lower-density STM32G474 variant when its smaller Flash capacity still satisfies the application and reducing memory may simplify cost or qualification. Select a higher-density 512 KB-class option only when the firmware, buffers, or future update requirements justify the added memory.
Is STM32G474RCT6 suitable for industrial and analog-rich designs?
The STM32G474RCT6 is suitable for industrial and analog-rich embedded designs because it combines a 170 MHz Cortex-M4F core, math acceleration, 128 KB SRAM, and a rich analog peripheral set in a 64-LQFP package. According to the official STMicroelectronics family datasheet, the family also includes a 184 ps, 12-channel high-resolution timer. Suitability still depends on the specific analog ratings, operating temperature, safety requirements, and EMC environment for the finished equipment.

داتای سەرچاوەی ئەندازیاری بۆ STM32G474RCT6 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the STM32G474RCT6 when a new design specifically requires a 170 MHz Arm Cortex-M4F core, 256 KB of Flash, 128 KB of SRAM, math acceleration, and a 64-LQFP footprint. Choose STM32G473RCT6 when the cross-reference data confirms that its STM32G4 peripherals satisfy the design and procurement conditions favor that option. Choose STM32G474CBT6 or STM32G474RBT6 only when 128 KB of Flash is sufficient; their lower memory density can make firmware or update plans more restrictive. Choose STM32G474RET6 when 512 KB of Flash justifies the higher density while retaining the same 64-LQFP format. Regardless of the selected ordering code, verify pin multiplexing, peripheral availability, operating temperature, analog limits, and firmware support before approving a substitution.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە STM32G473RCT6 STM32G473RET6 STM32G474CBT6 STM32G474RBT6 STM32G474RET6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
CPU Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum Frequency 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz
Flash Memory 256 KB 256 KB 512 KB 128 KB 128 KB 512 KB
SRAM 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
Math Accelerator Present Present Present Present Present Present

جیاکەرەوە سەرەکییەکان

  • Balanced 256 KB Flash configuration (بەراورد بەSTM32G474CBT6)
  • Same-family alternative without density upgrade (بەراورد بەSTM32G474RET6)
  • Documented cross-family substitution route (بەراورد بەSTM32G473RCT6)

تێبینییەکانی دیزاین

Place all required decoupling capacitors directly beside the corresponding STM32G474RCT6 power pins, with the shortest possible return path through the ground plane. Use the exact capacitor values, voltage tolerances, and power-up sequencing requirements listed in the manufacturer datasheet and hardware application notes. The supplied search data does not specify the operating-voltage range or pin-level decoupling table, so do not infer those values from other STM32G4 devices. Validate startup, brownout behavior, and analog-reference settling before releasing the PCB.

Separate analog and digital return paths where the application permits, and keep the MCU, analog inputs, references, and precision timing loops away from high-current switching nodes. The 64-LQFP footprint leaves adequate routing access, but lead spacing is not a substitute for good placement. Cross-check the complete pin table and package drawing in the official STMicroelectronics documentation because the supplied verified records identify the 10 x 10 mm package without exposing individual pin assignments.

Do not treat STM32G474CBT6, STM32G474RBT6, STM32G474RET6, or STM32G473RCT6 as unconditional firmware-compatible substitutes merely because they use the same 64-LQFP footprint. Compare the exact peripheral map, timer channels, analog functions, interrupt topology, Flash organization, boot behavior, and pin multiplexing. After any substitution, rebuild the firmware against the selected device header and run hardware tests for ADC accuracy, timer edge placement, communications, and supply sequencing.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The supplied verified search results identify the manufacturer, package, core, memory, and performance, but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than being inferred.

داتا پشتڕاستکراوەتەوە لە: 2026-10-28 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

STM32G474RCT6 STM32G474RCT6 datasheet STMicroelectronics STM32G474RCT6 STM32G474RCT6 170MHz Cortex-M4F STM32G474RCT6 256KB Flash 128KB SRAM STM32G474RCT6 LQFP-64 pinout STM32G474RCT6 motor control MCU STM32G474RCT6 digital power conversion STM32G474RCT6 vs STM32G473RCT6 STM32G474RCT6 drop-in replacement STM32G474RCT6 price and stock where to buy STM32G474RCT6

پێکهاتە و زاراوە پەیوەندیدارەکان

STMicroelectronics STM32G474RCT6 STM32G473RCT6 STM32G473RET6 STM32G474CBT6 STM32G474RBT6 STM32G474RET6 Arm Cortex-M4F Arm Cortex-M4 microcontroller 32-bit RISC processor MCU embedded control 256 KB Flash 128 KB SRAM 170 MHz 213 DMIPS floating-point unit high-resolution timer 184 ps timer resolution math accelerator rich analog peripheral set 64-LQFP LQFP package family surface-mount package industrial motor control digital power conversion data acquisition
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ