SY88803VKI - 155Mbps PECL Limiting Postamplifier | Microchip
MPN: SY88803VKI ✗ کۆتایی ژیانSY88803VKI گشتی
A limiting postamplifier is a specialized amplifier optimized for recovering and reshaping logic signals from optical receivers. Its place in the signal chain is after the photodiode and transimpedance amplifier: the TIA performs current-to-voltage conversion, while the postamplifier adds gain, limits amplitude, suppresses noise, and provides compatible differential outputs. This product belongs to the optical communication IC and special-purpose amplifier hierarchy.
The SY88803VKI supports operation to 155Mbps from either a 3.3V or 5V supply. Its PECL outputs are intended for high-speed optical-network interfaces, while the TTL loss-of-signal output provides a simpler monitoring signal for system control. A TTL enable input gives the equipment designer a way to control loss-of-signal reporting, and the programmable loss-of-signal threshold allows detection behavior to be adapted to different receiver conditions.
Its low-noise PECL outputs are particularly useful when the postamplifier must limit a noisy waveform without introducing unnecessary timing or amplitude variation. The limiting function establishes a stable logic level for downstream clock-and-data-recovery, serializer, or switching circuitry. Operating from a single 3.3V or 5V rail also simplifies the power architecture of compact optical transceiver modules compared with a dual-rail implementation.
Typical applications include 155Mbps SONET-class optical receivers, optical network transceiver modules, telecommunications line cards, and other high-speed fiber-optic data links. In each case, the SY88803VKI can follow a transimpedance amplifier and present PECL-compatible data to a clock-and-data-recovery or retiming stage. Its TTL loss-of-signal indication is useful for supervising link availability in equipment-management logic.
Designers should review the manufacturer datasheet’s connection, decoupling, and layout guidance before finalizing a high-speed PCB. PECL traces require controlled impedance, short connections, appropriate reference-plane continuity, and careful treatment of supply and ground return paths. The loss-of-signal threshold, enable polarity, and output interface should also be verified against the system-level monitoring requirements.
This product page combines the manufacturer’s device description, the available package and interface characteristics, drop-in replacement status, comparison fields, and practical PCB guidance. It is intended to help engineers determine whether the SY88803VKI matches the required optical-link speed, supply voltage, logic interface, package, and loss-of-signal behavior before committing the design to production.
جێگرەوەکانی جێگۆڕکێ بۆ SY88803VKI — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەSY88803VKI زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Device Type | Limiting postamplifier IC |
| Maximum Data Rate | 155 Mbps |
| ڤۆڵتیەی دابینکردن | 3.3 V or 5 V |
| Output Interface | Differential PECL |
| Loss-of-Signal Output | TTL |
| Loss-of-Signal Behavior | Chatter-free |
| Enable Input | TTL /EN |
| Loss-of-Signal Threshold | Programmable |
| Application | Optical networks |
| پاکێج | 10-MSOP |
| Package Width | 3.00 mm |
| Package Height | 0.118 inch |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی SY88803VKI 0.118 inch
ڕێکخستنی پین بۆ SY88803VKI (پاکێجی 0.118 inch). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ SY88803VKI.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
SY88803VKI گونجاوە بۆ 6 بەکارھێنانs: 155Mbps Optical Receiver Modules, SONET-Class Telecommunications Links, Optical Transceiver Front Ends, Telecommunications Line Cards, Clock-and-Data-Recovery Front Ends, Fiber-Optic Data Links.
155Mbps Optical Receiver Modules
The SY88803VKI is well matched to the limiting stage of a 155Mbps optical receiver module because it accepts the noisy linear output of a transimpedance amplifier and converts it into limited differential PECL data. Operation from either 3.3V or 5V supports compact module power architectures, while the programmable TTL loss-of-signal indication allows the host equipment to monitor optical-link presence. Place the device close to the receiver front end and follow the manufacturer’s high-speed decoupling and controlled-impedance guidance.
پێشنیارکراو
SONET-Class Telecommunications Links
The SY88803VKI supports receive paths operating at 155Mbps, a rate commonly associated with SONET-class transport links. Its limiting amplifier stage restores signal levels after the photodiode and transimpedance amplifier, and its differential PECL outputs connect naturally to compatible clock-and-data-recovery or forwarding circuitry. The TTL loss-of-signal output provides a separate monitoring function without burdening the high-speed data interface. Its 10-MSOP package supports compact line-card and transceiver layouts.
پێشنیارکراو
Optical Transceiver Front Ends
In a bidirectional optical transceiver, the receive path requires a clean digital output after the photodiode and transimpedance stage. The SY88803VKI provides this function at rates up to 155Mbps while supporting a single 3.3V or 5V supply. Its programmable loss-of-signal threshold can be adjusted to suit the receiver’s noise floor and usable signal amplitude, and the TTL monitoring output can be routed to transceiver control logic. Careful reference-plane and return-path management is essential for reliable PECL operation.
پێشنیارکراو
Telecommunications Line Cards
The SY88803VKI can provide the recovered data interface for a 155Mbps telecommunications line card receiving optical signals from an external network. Its role is to limit the TIA output into clean PECL levels so that downstream timing and switching circuits receive repeatable logic waveforms. The chatter-free TTL loss-of-signal output supports fault supervision, while the programmable threshold enables adaptation to different optical budgets. Compact 10-MSOP construction helps conserve board area in multi-channel line-card designs.
پێشنیارکراو
Clock-and-Data-Recovery Front Ends
The SY88803VKI is suitable for driving a clock-and-data-recovery block when the input originates from an optical receiver. By limiting the TIA waveform, it provides stable differential PECL outputs at rates up to 155Mbps and reduces the amplitude variation seen by the timing-recovery circuitry. The device’s 3.3V or 5V supply flexibility helps align with the CDR and system rails. Designers should verify output levels, rise and fall timing, and board-level signal integrity against the downstream device specifications.
پێشنیارکراو
Fiber-Optic Data Links
The SY88803VKI supports the receive side of a 155Mbps fiber-optic data link by recovering a usable logic signal from the analog output of a transimpedance amplifier. Differential PECL outputs suit high-speed digital backplanes and transceiver logic, while the TTL loss-of-signal path gives system controllers a direct indication that the optical signal has fallen below the selected threshold. Low-power operation from a single 3.3V or 5V rail simplifies system partitioning and supports space-constrained optical interface assemblies.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ SY88803VKI — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Brand | Microchip Technology |
| Package | 10-MSOP |
| Device Type | Limiting postamplifier IC |
| Maximum Data Rate | 155 Mbps |
| Supply Voltage | 3.3 V or 5 V |
| Data Output | Differential PECL |
| Loss-of-Signal Output | Chatter-free TTL |
| Loss-of-Signal Threshold | Programmable |
| Enable Control | TTL /EN input |
| Primary Application | Optical networks |
جیاکەرەوە سەرەکییەکان
- Integrated optical-link monitoring functions (بەراورد بەGeneric limiting amplifier)
- Single-rail supply flexibility (بەراورد بەDual-rail PECL postamplifier)
- Receiver-noise conditioning (بەراورد بەLinear gain stage)
تێبینییەکانی دیزاین
Place all bypass capacitors as close as practical to the SY88803VKI supply and ground pins. Use a continuous ground plane beneath the high-speed PECL routes, minimize the supply-current loop, and avoid plane splits that interrupt return current. The device’s limited operating speed allows conventional board construction, but the 155Mbps PECL interface still benefits from short traces and a well-defined reference plane.
Treat the differential PECL outputs as controlled-impedance high-speed signals. Keep the output traces short, match their geometry where practical, provide adequate receiver termination, and avoid coupling them to clocks, switching nodes, or the noisy TIA input stage. Verify amplitude, timing, and ringing at the receiver using realistic probes because the postamplifier is intended to limit noise from the preceding transimpedance amplifier.
Do not treat the SY88803V family identifier alone as proof that every suffix is a drop-in substitute. Confirm the exact 10-MSOP footprint, pin functions, supply limits, loss-of-signal polarity, threshold-control implementation, and output timing against the manufacturer datasheet. Also confirm the programmed LOS threshold against the optical receiver’s noise and minimum valid signal levels before production release.
زانیاری پابەندبوون
The available device information does not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. AEC-Q100 is not applicable to this optical communications amplifier unless a separate automotive-qualified ordering variant is explicitly specified.