SY88803VKI - 155Mbps PECL Limiting Postamplifier | Microchip
部品番号: SY88803VKI ✗ 生産終了SY88803VKI 概要
A limiting postamplifier is a specialized amplifier optimized for recovering and reshaping logic signals from optical receivers. Its place in the signal chain is after the photodiode and transimpedance amplifier: the TIA performs current-to-voltage conversion, while the postamplifier adds gain, limits amplitude, suppresses noise, and provides compatible differential outputs. This product belongs to the optical communication IC and special-purpose amplifier hierarchy.
The SY88803VKI supports operation to 155Mbps from either a 3.3V or 5V supply. Its PECL outputs are intended for high-speed optical-network interfaces, while the TTL loss-of-signal output provides a simpler monitoring signal for system control. A TTL enable input gives the equipment designer a way to control loss-of-signal reporting, and the programmable loss-of-signal threshold allows detection behavior to be adapted to different receiver conditions.
Its low-noise PECL outputs are particularly useful when the postamplifier must limit a noisy waveform without introducing unnecessary timing or amplitude variation. The limiting function establishes a stable logic level for downstream clock-and-data-recovery, serializer, or switching circuitry. Operating from a single 3.3V or 5V rail also simplifies the power architecture of compact optical transceiver modules compared with a dual-rail implementation.
Typical applications include 155Mbps SONET-class optical receivers, optical network transceiver modules, telecommunications line cards, and other high-speed fiber-optic data links. In each case, the SY88803VKI can follow a transimpedance amplifier and present PECL-compatible data to a clock-and-data-recovery or retiming stage. Its TTL loss-of-signal indication is useful for supervising link availability in equipment-management logic.
Designers should review the manufacturer datasheet’s connection, decoupling, and layout guidance before finalizing a high-speed PCB. PECL traces require controlled impedance, short connections, appropriate reference-plane continuity, and careful treatment of supply and ground return paths. The loss-of-signal threshold, enable polarity, and output interface should also be verified against the system-level monitoring requirements.
This product page combines the manufacturer’s device description, the available package and interface characteristics, drop-in replacement status, comparison fields, and practical PCB guidance. It is intended to help engineers determine whether the SY88803VKI matches the required optical-link speed, supply voltage, logic interface, package, and loss-of-signal behavior before committing the design to production.
ドロップイン代替品: SY88803VKI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSY88803VKI 最大定格&電気的特性
| Device Type | Limiting postamplifier IC |
| Maximum Data Rate | 155 Mbps |
| 電源電圧 | 3.3 V or 5 V |
| Output Interface | Differential PECL |
| Loss-of-Signal Output | TTL |
| Loss-of-Signal Behavior | Chatter-free |
| Enable Input | TTL /EN |
| Loss-of-Signal Threshold | Programmable |
| Application | Optical networks |
| パッケージ | 10-MSOP |
| Package Width | 3.00 mm |
| Package Height | 0.118 inch |
| 実装タイプ | Surface mount |
SY88803VKI 0.118 inch ピン配置ガイド
SY88803VKI (0.118 inch パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: SY88803VKI.
詳細は データシート をご参照ください。
主な用途
SY88803VKI の用途: 6 件s: 155Mbps Optical Receiver Modules, SONET-Class Telecommunications Links, Optical Transceiver Front Ends, Telecommunications Line Cards, Clock-and-Data-Recovery Front Ends, Fiber-Optic Data Links.
155Mbps Optical Receiver Modules
The SY88803VKI is well matched to the limiting stage of a 155Mbps optical receiver module because it accepts the noisy linear output of a transimpedance amplifier and converts it into limited differential PECL data. Operation from either 3.3V or 5V supports compact module power architectures, while the programmable TTL loss-of-signal indication allows the host equipment to monitor optical-link presence. Place the device close to the receiver front end and follow the manufacturer’s high-speed decoupling and controlled-impedance guidance.
おすすめ
SONET-Class Telecommunications Links
The SY88803VKI supports receive paths operating at 155Mbps, a rate commonly associated with SONET-class transport links. Its limiting amplifier stage restores signal levels after the photodiode and transimpedance amplifier, and its differential PECL outputs connect naturally to compatible clock-and-data-recovery or forwarding circuitry. The TTL loss-of-signal output provides a separate monitoring function without burdening the high-speed data interface. Its 10-MSOP package supports compact line-card and transceiver layouts.
おすすめ
Optical Transceiver Front Ends
In a bidirectional optical transceiver, the receive path requires a clean digital output after the photodiode and transimpedance stage. The SY88803VKI provides this function at rates up to 155Mbps while supporting a single 3.3V or 5V supply. Its programmable loss-of-signal threshold can be adjusted to suit the receiver’s noise floor and usable signal amplitude, and the TTL monitoring output can be routed to transceiver control logic. Careful reference-plane and return-path management is essential for reliable PECL operation.
おすすめ
Telecommunications Line Cards
The SY88803VKI can provide the recovered data interface for a 155Mbps telecommunications line card receiving optical signals from an external network. Its role is to limit the TIA output into clean PECL levels so that downstream timing and switching circuits receive repeatable logic waveforms. The chatter-free TTL loss-of-signal output supports fault supervision, while the programmable threshold enables adaptation to different optical budgets. Compact 10-MSOP construction helps conserve board area in multi-channel line-card designs.
おすすめ
Clock-and-Data-Recovery Front Ends
The SY88803VKI is suitable for driving a clock-and-data-recovery block when the input originates from an optical receiver. By limiting the TIA waveform, it provides stable differential PECL outputs at rates up to 155Mbps and reduces the amplitude variation seen by the timing-recovery circuitry. The device’s 3.3V or 5V supply flexibility helps align with the CDR and system rails. Designers should verify output levels, rise and fall timing, and board-level signal integrity against the downstream device specifications.
おすすめ
Fiber-Optic Data Links
The SY88803VKI supports the receive side of a 155Mbps fiber-optic data link by recovering a usable logic signal from the analog output of a transimpedance amplifier. Differential PECL outputs suit high-speed digital backplanes and transceiver logic, while the TTL loss-of-signal path gives system controllers a direct indication that the optical signal has fallen below the selected threshold. Low-power operation from a single 3.3V or 5V rail simplifies system partitioning and supports space-constrained optical interface assemblies.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SY88803VKI — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Microchip Technology |
| Package | 10-MSOP |
| Device Type | Limiting postamplifier IC |
| Maximum Data Rate | 155 Mbps |
| Supply Voltage | 3.3 V or 5 V |
| Data Output | Differential PECL |
| Loss-of-Signal Output | Chatter-free TTL |
| Loss-of-Signal Threshold | Programmable |
| Enable Control | TTL /EN input |
| Primary Application | Optical networks |
主な差別化要因
- Integrated optical-link monitoring functions (vs Generic limiting amplifier)
- Single-rail supply flexibility (vs Dual-rail PECL postamplifier)
- Receiver-noise conditioning (vs Linear gain stage)
設計ノート
Place all bypass capacitors as close as practical to the SY88803VKI supply and ground pins. Use a continuous ground plane beneath the high-speed PECL routes, minimize the supply-current loop, and avoid plane splits that interrupt return current. The device’s limited operating speed allows conventional board construction, but the 155Mbps PECL interface still benefits from short traces and a well-defined reference plane.
Treat the differential PECL outputs as controlled-impedance high-speed signals. Keep the output traces short, match their geometry where practical, provide adequate receiver termination, and avoid coupling them to clocks, switching nodes, or the noisy TIA input stage. Verify amplitude, timing, and ringing at the receiver using realistic probes because the postamplifier is intended to limit noise from the preceding transimpedance amplifier.
Do not treat the SY88803V family identifier alone as proof that every suffix is a drop-in substitute. Confirm the exact 10-MSOP footprint, pin functions, supply limits, loss-of-signal polarity, threshold-control implementation, and output timing against the manufacturer datasheet. Also confirm the programmed LOS threshold against the optical receiver’s noise and minimum valid signal levels before production release.
コンプライアンス情報
The available device information does not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. AEC-Q100 is not applicable to this optical communications amplifier unless a separate automotive-qualified ordering variant is explicitly specified.