Microchip Technology

SY88803VKI - 155Mbps PECL Limiting Postamplifier | Microchip

부품 번호: SY88803VKI ✗ 단종
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88803VKI 개요

Microchip SY88803VKI is a low-power limiting postamplifier IC designed for 155Mbps fiber-optic receiver links, with a 3.3V or 5V supply, PECL data outputs, a TTL loss-of-signal output, and a 10-MSOP package. The device operates as the limiting stage following a transimpedance amplifier, converting the receiver’s noisy analog signal into a usable high-speed digital signal.

A limiting postamplifier is a specialized amplifier optimized for recovering and reshaping logic signals from optical receivers. Its place in the signal chain is after the photodiode and transimpedance amplifier: the TIA performs current-to-voltage conversion, while the postamplifier adds gain, limits amplitude, suppresses noise, and provides compatible differential outputs. This product belongs to the optical communication IC and special-purpose amplifier hierarchy.

The SY88803VKI supports operation to 155Mbps from either a 3.3V or 5V supply. Its PECL outputs are intended for high-speed optical-network interfaces, while the TTL loss-of-signal output provides a simpler monitoring signal for system control. A TTL enable input gives the equipment designer a way to control loss-of-signal reporting, and the programmable loss-of-signal threshold allows detection behavior to be adapted to different receiver conditions.

Its low-noise PECL outputs are particularly useful when the postamplifier must limit a noisy waveform without introducing unnecessary timing or amplitude variation. The limiting function establishes a stable logic level for downstream clock-and-data-recovery, serializer, or switching circuitry. Operating from a single 3.3V or 5V rail also simplifies the power architecture of compact optical transceiver modules compared with a dual-rail implementation.

Typical applications include 155Mbps SONET-class optical receivers, optical network transceiver modules, telecommunications line cards, and other high-speed fiber-optic data links. In each case, the SY88803VKI can follow a transimpedance amplifier and present PECL-compatible data to a clock-and-data-recovery or retiming stage. Its TTL loss-of-signal indication is useful for supervising link availability in equipment-management logic.

Designers should review the manufacturer datasheet’s connection, decoupling, and layout guidance before finalizing a high-speed PCB. PECL traces require controlled impedance, short connections, appropriate reference-plane continuity, and careful treatment of supply and ground return paths. The loss-of-signal threshold, enable polarity, and output interface should also be verified against the system-level monitoring requirements.

This product page combines the manufacturer’s device description, the available package and interface characteristics, drop-in replacement status, comparison fields, and practical PCB guidance. It is intended to help engineers determine whether the SY88803VKI matches the required optical-link speed, supply voltage, logic interface, package, and loss-of-signal behavior before committing the design to production.

드롭인 대체품: SY88803VKI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

SY88803VKI 최대 정격 & 전기적 특성

Device Type Limiting postamplifier IC
Maximum Data Rate 155 Mbps
공급 전압 3.3 V or 5 V
Output Interface Differential PECL
Loss-of-Signal Output TTL
Loss-of-Signal Behavior Chatter-free
Enable Input TTL /EN
Loss-of-Signal Threshold Programmable
Application Optical networks
패키지 10-MSOP
Package Width 3.00 mm
Package Height 0.118 inch
실장 유형 Surface mount

SY88803VKI 0.118 inch 핀 구성 가이드

SY88803VKI(0.118 inch 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

SY88803VKI의 0.118 inch 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: SY88803VKI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

SY88803VKI 적합 용도: 6 애플리케이션s: 155Mbps Optical Receiver Modules, SONET-Class Telecommunications Links, Optical Transceiver Front Ends, Telecommunications Line Cards, Clock-and-Data-Recovery Front Ends, Fiber-Optic Data Links.

🌐

155Mbps Optical Receiver Modules

The SY88803VKI is well matched to the limiting stage of a 155Mbps optical receiver module because it accepts the noisy linear output of a transimpedance amplifier and converts it into limited differential PECL data. Operation from either 3.3V or 5V supports compact module power architectures, while the programmable TTL loss-of-signal indication allows the host equipment to monitor optical-link presence. Place the device close to the receiver front end and follow the manufacturer’s high-speed decoupling and controlled-impedance guidance.

🌐

SONET-Class Telecommunications Links

The SY88803VKI supports receive paths operating at 155Mbps, a rate commonly associated with SONET-class transport links. Its limiting amplifier stage restores signal levels after the photodiode and transimpedance amplifier, and its differential PECL outputs connect naturally to compatible clock-and-data-recovery or forwarding circuitry. The TTL loss-of-signal output provides a separate monitoring function without burdening the high-speed data interface. Its 10-MSOP package supports compact line-card and transceiver layouts.

📡

Optical Transceiver Front Ends

In a bidirectional optical transceiver, the receive path requires a clean digital output after the photodiode and transimpedance stage. The SY88803VKI provides this function at rates up to 155Mbps while supporting a single 3.3V or 5V supply. Its programmable loss-of-signal threshold can be adjusted to suit the receiver’s noise floor and usable signal amplitude, and the TTL monitoring output can be routed to transceiver control logic. Careful reference-plane and return-path management is essential for reliable PECL operation.

🏭

Telecommunications Line Cards

The SY88803VKI can provide the recovered data interface for a 155Mbps telecommunications line card receiving optical signals from an external network. Its role is to limit the TIA output into clean PECL levels so that downstream timing and switching circuits receive repeatable logic waveforms. The chatter-free TTL loss-of-signal output supports fault supervision, while the programmable threshold enables adaptation to different optical budgets. Compact 10-MSOP construction helps conserve board area in multi-channel line-card designs.

🖥️

Clock-and-Data-Recovery Front Ends

The SY88803VKI is suitable for driving a clock-and-data-recovery block when the input originates from an optical receiver. By limiting the TIA waveform, it provides stable differential PECL outputs at rates up to 155Mbps and reduces the amplitude variation seen by the timing-recovery circuitry. The device’s 3.3V or 5V supply flexibility helps align with the CDR and system rails. Designers should verify output levels, rise and fall timing, and board-level signal integrity against the downstream device specifications.

🔧

Fiber-Optic Data Links

The SY88803VKI supports the receive side of a 155Mbps fiber-optic data link by recovering a usable logic signal from the analog output of a transimpedance amplifier. Differential PECL outputs suit high-speed digital backplanes and transceiver logic, while the TTL loss-of-signal path gives system controllers a direct indication that the optical signal has fallen below the selected threshold. Low-power operation from a single 3.3V or 5V rail simplifies system partitioning and supports space-constrained optical interface assemblies.

추천 제품 요약

SY88803VKI Microchip Technology 사용처: 155Mbps Optical Receiver Modules, SONET-Class Telecommunications Links, Optical Transceiver Front Ends, Telecommunications Line Cards, Clock-and-Data-Recovery Front Ends, Fiber-Optic Data Links SY88803V SY88803V family device 사용처: 155Mbps Optical Receiver Modules, SONET-Class Telecommunications Links, Optical Transceiver Front Ends, Telecommunications Line Cards, Clock-and-Data-Recovery Front Ends, Fiber-Optic Data Links
What is the SY88803VKI used for?
The SY88803VKI is a low-power limiting postamplifier used in 155Mbps fiber-optic receivers. It follows a transimpedance amplifier, limits the resulting noisy analog waveform, and provides differential PECL outputs for downstream clock-and-data-recovery circuitry. According to the Microchip product page, the device also includes a TTL loss-of-signal output, a TTL enable input, and a programmable loss-of-signal threshold.
What is the operating speed of the SY88803VKI?
The SY88803VKI operates to 155Mbps for high-speed optical-network data links. The Micrel Semiconductor datasheet describes the part as a 3.3V/5V 155Mbps PECL low-power limiting postamplifier. This data rate makes it appropriate for receiver paths requiring recovered PECL data, including telecommunications and optical transceiver applications operating at the same nominal link rate.
Can the SY88803VKI operate from 3.3V or 5V?
Yes. The SY88803VKI supports either a 3.3V or 5V supply, according to the manufacturer datasheet description. That flexibility allows the amplifier to be used in systems with different rail voltages, although each complete optical receiver design must still satisfy the device’s recommended operating conditions, decoupling requirements, and interface voltage limits.
Where can I download the SY88803VKI datasheet PDF?
The official SY88803V family documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/SY88803V. The SY88803VKI datasheet contains the electrical characteristics, limiting-amplifier information, loss-of-signal behavior, pin descriptions, and application guidance needed to evaluate the device in a 155Mbps optical receiver.
Where can I find the SY88803VKI pinout?
The SY88803VKI pinout is identified in the manufacturer’s SY88803V family datasheet, accessible from the official Microchip SY88803V product page. The device uses a 10-MSOP package. Use the pin-description table and package drawing in that datasheet when assigning signal names, supply connections, reference voltages, and decoupling positions on the PCB.
What is the best drop-in replacement for the SY88803VKI?
No independently verified pin-compatible drop-in replacement for the SY88803VKI was identified in the available cross-reference information. The SY88803V family shares the same underlying device functionality, but a suffix or packaging change alone does not establish drop-in interchangeability. Before substituting any part, verify the exact footprint, pin functions, supply range, PECL output behavior, loss-of-signal polarity, threshold range, and timing specifications against the manufacturer datasheet.
Is the SY88803VKI suitable for an optical transceiver module?
Yes, the SY88803VKI is specifically designed for fiber-optic receiver signal paths. It accepts the linear output of a transimpedance amplifier and provides limited PECL data outputs at rates up to 155Mbps. The TTL loss-of-signal output and programmable threshold are useful for link monitoring, while the 3.3V or 5V supply option supports different module architectures.
What is the difference between PECL output and TTL loss-of-signal output?
The PECL outputs carry the recovered high-speed data, while the TTL loss-of-signal output reports the state of the incoming optical signal. The SY88803VKI provides differential PECL data outputs operating at up to 155Mbps and a separate chatter-free TTL LOS indication. The TTL enable input controls whether that monitoring output is active, and the LOS threshold is programmable.
How should the loss-of-signal threshold be configured?
The loss-of-signal threshold is programmable, allowing the receiver design to define the amplitude condition that indicates loss of optical signal. Set the threshold according to the noise and signal levels produced by the selected transimpedance amplifier and photodiode. The manufacturer datasheet should be used for the supported adjustment range, control method, timing, and recommended component values.
What layout practices are important for the SY88803VKI?
Use short, impedance-controlled connections and place bypassing capacitors close to the supply and ground pins. Maintain a continuous ground reference beneath high-speed traces, minimize loop area, and avoid routing PECL signals adjacent to noisy switching nodes. The manufacturer application guidance should also be followed when connecting the transimpedance amplifier, PECL outputs, TTL monitoring circuit, and programmable threshold network.
What can replace the SY88803VKI?
A replacement should provide the same 10-MSOP footprint, pin functions, 3.3V/5V operating capability, 155Mbps performance, differential PECL outputs, and compatible TTL loss-of-signal behavior. No specific drop-in candidate was established from the available cross-reference results. Engineers should request a manufacturer-confirmed substitute and compare every electrical and timing parameter before changing an approved design.
Is there a Microchip equivalent to the SY88803VKI?
The Microchip SY88803V family is the directly identified product family for the SY88803VKI, but the available information does not establish a distinct pin-compatible replacement MPN. A valid drop-in alternative must match the 10-MSOP footprint, supply range, PECL interface, loss-of-signal implementation, threshold control, and 155Mbps timing requirements. Use the manufacturer cross-reference search for newly released equivalents.
What are the key specifications of the SY88803VKI that engineers should know?
The key specifications are a maximum data rate of 155Mbps, operation from 3.3V or 5V, differential PECL data outputs, a chatter-free TTL loss-of-signal output, a TTL enable input, and a programmable LOS threshold. The device is packaged in a 10-MSOP and is intended for optical networks. These features position it as the limiting stage following a transimpedance amplifier.
Where can I buy the SY88803VKI and check its lead time?
Use the “Request a Quote” form on this page to ask for current SY88803VKI availability, minimum order quantity, packaging, and lead time. The device is listed as a 10-MSOP limiting postamplifier for optical networks, but inventory and lead time can change. Request the exact MPN and confirm whether a tube or another approved shipping configuration is required for your production plan.
Is the SY88803VKI in stock?
Current stock should be confirmed through the “Request a Quote” form on this page. The SY88803VKI is a cataloged 10-MSOP limiting postamplifier for 155Mbps optical receivers, but a distributor listing does not by itself guarantee current inventory. Include your required quantity, date code, target packaging, and production schedule when requesting a quotation.

엔지니어링 참조 데이터: SY88803VKI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the SY88803VKI when a 155Mbps fiber-optic receiver needs a dedicated limiting stage after the transimpedance amplifier and a separate TTL loss-of-signal monitor. Its 3.3V or 5V operation, differential PECL outputs, programmable threshold, and 10-MSOP package fit compact optical transceiver, line-card, and data-link designs. Before committing, confirm that the receiver noise and signal levels are compatible with the programmable threshold and that the loss-of-signal polarity matches the host control logic. No separately verified drop-in replacement was identified, so an existing production design should normally retain the qualified device unless Microchip confirms a specific substitute. For designs requiring a different data rate, output standard, package, or loss-of-signal implementation, treat that as a redesign rather than a pin-compatible replacement and validate timing, power, and signal integrity at the system level.

대체품과의 비교

파라미터 이 제품
Brand Microchip Technology
Package 10-MSOP
Device Type Limiting postamplifier IC
Maximum Data Rate 155 Mbps
Supply Voltage 3.3 V or 5 V
Data Output Differential PECL
Loss-of-Signal Output Chatter-free TTL
Loss-of-Signal Threshold Programmable
Enable Control TTL /EN input
Primary Application Optical networks

주요 차별점

  • Integrated optical-link monitoring functions (vs Generic limiting amplifier)
  • Single-rail supply flexibility (vs Dual-rail PECL postamplifier)
  • Receiver-noise conditioning (vs Linear gain stage)

설계 노트

Place all bypass capacitors as close as practical to the SY88803VKI supply and ground pins. Use a continuous ground plane beneath the high-speed PECL routes, minimize the supply-current loop, and avoid plane splits that interrupt return current. The device’s limited operating speed allows conventional board construction, but the 155Mbps PECL interface still benefits from short traces and a well-defined reference plane.

Treat the differential PECL outputs as controlled-impedance high-speed signals. Keep the output traces short, match their geometry where practical, provide adequate receiver termination, and avoid coupling them to clocks, switching nodes, or the noisy TIA input stage. Verify amplitude, timing, and ringing at the receiver using realistic probes because the postamplifier is intended to limit noise from the preceding transimpedance amplifier.

Do not treat the SY88803V family identifier alone as proof that every suffix is a drop-in substitute. Confirm the exact 10-MSOP footprint, pin functions, supply limits, loss-of-signal polarity, threshold-control implementation, and output timing against the manufacturer datasheet. Also confirm the programmed LOS threshold against the optical receiver’s noise and minimum valid signal levels before production release.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available device information does not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. AEC-Q100 is not applicable to this optical communications amplifier unless a separate automotive-qualified ordering variant is explicitly specified.

관련 검색

SY88803VKI datasheet SY88803VKI datasheet pdf SY88803VKI pinout SY88803VKI specifications Microchip SY88803VKI SY88803VKI 155Mbps amplifier SY88803VKI 10-MSOP SY88803VKI optical receiver SY88803VKI PECL postamplifier SY88803VKI drop-in replacement SY88803VKI equivalent SY88803VKI price SY88803VKI stock SY88803VKI loss of signal SY88803VKI application circuit

관련 부품 & 용어

Microchip Technology Micrel Semiconductor SY88803VKI SY88803V limiting postamplifier special-purpose amplifier integrated circuit semiconductor fiber-optic receiver optical network transimpedance amplifier PECL TTL loss of signal 155Mbps 3.3V power supply 5V power supply programmable threshold 10-MSOP MSOP package family surface-mount package SMD high-speed signal conditioning clock-and-data recovery
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기