TAS5028APAG - 8-Channel Digital Audio PWM Processor | TI
MPN: TAS5028APAG ✓ چالاکTAS5028APAG گشتی
A digital audio PWM processor is an audio interface and modulation IC positioned between a digital signal processor and a multichannel power-amplifier stage. It receives serialized digital audio information, formats it into the modulation signals required by the amplifier channels, and supports automatic control of individual output configurations. This function places the TAS5028APAG within the broader hierarchy of audio interface IC, signal-processing IC, and power-management semiconductor.
The principal features include eight PWM output channels, support for both I2C and I2S digital-audio interfaces, operation from 3 V to 3.6 V, and an operating temperature range from 0 °C to 70 °C. The integrated eight-channel architecture reduces the number of separate digital audio modulators required in a surround-sound, home-theater, or multi-zone amplifier. Its 64-TQFP package provides a compact surface-mount solution for equipment with substantial channel count.
The processor is intended to work with digital signal processors and audio power stages, allowing audio data, control information, and channel-specific modulation to share a compact digital control architecture. Automatic adjustment of control configurations can simplify system initialization and channel management. Designers should still verify amplifier compatibility, required control timing, and output behavior against the manufacturer datasheet before committing to a production board.
Typical uses include 5.1-channel and 7.1-channel home-theater amplifiers, multi-zone audio systems, powered speakers, soundbars, and professional audio equipment. It is particularly useful when the source processor already outputs digital audio and the power amplifier stage expects PWM control signals rather than an analog audio input.
PCB implementation requires careful separation between sensitive digital communication lines, supply routing, and high-current amplifier outputs. Although the TAS5028APAG itself is a digital controller, its I2C and I2S interfaces can be sensitive to clock jitter, ground bounce, and supply disturbances. Follow the pin-description table and recommended component-placement guidance in the manufacturer datasheet when assigning traces and decoupling.
This product page organizes the processor's key electrical characteristics, package details, ordering-code alternatives, practical application guidance, and design considerations. The information supports early architecture selection and PCB planning, while production qualification should use the complete manufacturer datasheet and the exact ordering suffix intended for assembly.
جێگرەوەکانی جێگۆڕکێ بۆ TAS5028APAG — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ TAS5028APAG (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package Type.
TAS5028APAGR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TAS5028APAGG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TAS5028PAG
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →TAS5028PAGR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →TAS5028PAGG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TAS5028APAG زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | 8-channel digital audio PWM processor |
| Number of Audio Channels | 8 channels |
| Supply Voltage Range | 3 V to 3.6 V |
| Digital Audio Interfaces | I2C and I2S |
| مەودای پلەی گەرمیی کارکردن | 0 °C to 70 °C |
| Package Type | 64-TQFP |
| Package Body Size | 10 mm × 10 mm |
| جۆری دامەزراندن | Surface mount |
| RoHS Compliance | RoHS3 compliant |
| Processor Function | Digital pulse-width modulation for eight audio channels |
| Control Interface | I2C control interface |
| Audio Data Interface | I2S audio data interface |
| ڕێکخستنی دەرچوون | Eight independent PWM output channels |
ڕێنمایی ڕێکخستنی پینی TAS5028APAG 10 mm × 10 mm
ڕێکخستنی پین بۆ TAS5028APAG (پاکێجی 10 mm × 10 mm). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ TAS5028APAG.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
TAS5028APAG گونجاوە بۆ 6 بەکارھێنانs: 5.1-Channel Home-Theater Amplifier, 7.1-Channel Surround-Sound Amplifier, Multi-Zone Audio Amplifier, Powered Speaker Network, Soundbar Multi-Channel Amplification, Professional Multi-Channel Audio System.
5.1-Channel Home-Theater Amplifier
The TAS5028APAG fits a digital-input home-theater amplifier because it provides eight PWM channels for surround-sound processing in a single 64-TQFP device. I2S can receive the multichannel audio stream from a digital signal processor, while I2C provides a separate configuration path. A 5.1 design can use the available channels for main, center, surround, and subwoofer amplification. With a 3 V to 3.6 V supply requirement, the processor should sit behind a regulator that maintains the specified range without excessive noise. The principal engineering benefit is channel integration, although the downstream power amplifiers must accept compatible PWM signaling and meet the timing requirements specified in the datasheet.
پێشنیارکراو
7.1-Channel Surround-Sound Amplifier
The TAS5028APAG is appropriate for a 7.1-channel amplifier because its eight-channel PWM architecture closely matches the seven main playback channels plus one subwoofer or additional auxiliary zone. Digital audio can be supplied through I2S from the system DSP, avoiding a separate bank of eight digital-to-analog converters before the power stages. The processor operates from 3 V to 3.6 V and supports I2C configuration, which allows channel setup to be managed separately from the audio stream. Layout should keep the I2S clock and data routes short, provide local supply bypassing, and maintain continuous ground references so switching power-amplifier currents do not corrupt the digital control signals.
پێشنیارکراو
Multi-Zone Audio Amplifier
A multi-zone residential or commercial amplifier can use the TAS5028APAG to distribute eight digital audio channels across separate listening areas. The I2S interface carries synchronized audio content, while I2C can be used for configuration and control tasks associated with the processor. This architecture is useful when the upstream DSP already performs source selection, mixing, and volume processing. Because the chip generates PWM control signals rather than delivering analog line-level audio, every destination requires a compatible power-amplifier stage. Engineers should evaluate channel latency, clock routing, thermal margins in the amplifiers, and the consequences of a 3 V to 3.6 V processor supply before deploying it across multiple rooms.
پێشنیارکراو
Powered Speaker Network
The TAS5028APAG can support powered speakers that receive digital audio from a central DSP and use local Class-D power stages. Its eight PWM channels allow one processor to coordinate several speaker outputs without requiring eight separate digital modulators. The 10 mm by 10 mm TQFP package is useful in compact electronics, while the 3 V to 3.6 V operating range fits many low-voltage digital subsystems. Implementation still requires a low-noise supply, careful I2S clock routing, and verification that the selected amplifier inputs accept the processor's PWM format. Firmware and system designers should also preserve correct channel mapping and gain-control sequencing during startup and standby transitions.
پێشنیارکراو
Soundbar Multi-Channel Amplification
The TAS5028APAG is suitable for the amplification section of a soundbar because the eight-channel architecture can coordinate multiple loudspeaker paths from a digital source. I2S connects the soundbar DSP to the processor, and I2C supports configuration without sharing the audio-data bus. Integrating the modulation function into one 64-TQFP package simplifies board partitioning compared with a collection of discrete channel modulators. In a soundbar, acoustic performance can be affected by amplifier-to-speaker relationships, so synchronization among all eight channels is important. Validate timing, power sequencing, and channel delay against the manufacturer specifications, and isolate high-current amplifier routing from the processor's digital interface.
پێشنیارکراو
Professional Multi-Channel Audio System
The TAS5028APAG can serve as the digital modulation controller in a professional audio system that distributes eight synchronized channels from a central DSP. Its I2S and I2S-compatible I2C control paths support a structured digital architecture, while the processor's 0 °C to 70 °C range suits many indoor commercial environments. The component is intended to control compatible power stages rather than directly drive loudspeakers, so amplifier input format, latency, and fault behavior must be verified. Professional installations should also account for EMI from high-power switching stages, reliable grounding, and the processor's narrow 3 V to 3.6 V supply range when designing redundant or temperature-controlled installations.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ TAS5028APAG — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | TAS5028APAGR | TAS5028APAGG4 | TAS5028PAG | TAS5028PAGR | TAS5028PAGG4 |
|---|---|---|---|---|---|---|
| Package | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) | 64-TQFP (10x10) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Function | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor | 8-channel digital audio PWM processor |
| Number of Channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels | 8 channels |
| Operating Supply Range | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Digital Interfaces | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S | I2C and I2S |
| Operating Temperature Range | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C | 0 °C to 70 °C |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Special Ordering Attribute | APAG ordering code | APAGR reel ordering code | APAGG4 green ordering code | PAG ordering code | PAGR reel ordering code | PAGG4 green ordering code |
جیاکەرەوە سەرەکییەکان
- Eight-channel digital modulation in one processor (بەراورد بەTAS5028PAG)
- Direct I2S and I2C integration (بەراورد بەTAS5028APAGR)
- Compact 10 mm by 10 mm surface-mount implementation (بەراورد بەTAS5028PAGG4)
تێبینییەکانی دیزاین
Place the TAS5028APAG's decoupling capacitors adjacent to the relevant supply and ground pins, using the manufacturer-datasheet layout and capacitance recommendations. Keep the 3 V to 3.6 V supply rail free of Class-D switching-node transients. A local regulator may be appropriate when the system rail is higher or noisier, provided its transient response does not disturb the digital audio interfaces.
Route I2S clock, data, and I2C signals as short, continuous traces away from Class-D switching outputs and high-current speaker paths. Maintain a continuous ground reference under the device and use a quiet digital ground strategy if the system separates analog and digital domains. Validate setup time, hold time, clock jitter, and maximum operating frequency against the complete Texas Instruments timing specification.
Use the official 64-TQFP land pattern and verify pin-1 orientation against the package drawing before releasing artwork. Preserve courtyard clearance for the 10 mm by 10 mm TQFP and provide adequate solder mask and paste uniformity across all 64 leads. Check the assembly drawing for any exposed-pad or thermal requirements before finalizing the footprint.
Do not treat the TAS5028APAG as a direct speaker driver; it generates PWM control signals for compatible power-amplifier stages. Confirm the downstream amplifier's expected input format, gain behavior, timing, and fault handling. Also verify the operating temperature range of 0 °C to 70 °C against the enclosure's internal temperature rather than relying only on the ambient specification.
زانیاری پابەندبوون
The product information identifies TAS5028APAG as RoHS3 compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact orderable part.