AD974ARS vs AD974BRSZ Comparison
Detailed side-by-side comparison of AD974ARS by Analog Devices and AD974BRSZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD974ARS | AD974BRSZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Obsolete | Active |
| Number of Analog Input Channels | 4 channels | 4 channels |
| Input Configuration | 4 single-ended analog inputs | — |
| ADC Resolution | 16 bit | — |
| Sampling Rate | 200 kSPS | — |
| Conversion Architecture | Successive-approximation switched-capacitor ADC | — |
| Internal Reference Voltage | +2.5 V | 2.5 V |
| Reference Selection | Internal or external 2.5 V reference | — |
| Nominal Supply Voltage | +5 V | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Analog Input Range 1 | 0 V to +4 V | — |
| Analog Input Range 2 | 0 V to +5 V | — |
| Analog Input Range 3 | ±10 V | — |
| Maximum Power Dissipation | 120 mW | — |
| Interface Type | Serial | — |
| Clock | On-chip clock | — |
| Power-Down Mode | Supported | Yes |
| Package | 28-pin SSOP | 28-pin SSOP |
| Mounting Type | Surface Mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Interface Levels | [DATA_NEEDED: digital interface voltage levels] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | 4-channel data-acquisition ADC |
| Resolution | — | 16 bit |
| Maximum Sampling Rate | — | 200 ksps |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Supply Voltage | — | 5 V |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Digital Interface | — | Serial interface |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |