AD974ARS vs AD974BRSZ तुलना

विस्तृत दोनों ओर की तुलना AD974ARS द्वारा Analog Devices और AD974BRSZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD974BRSZ AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ ✓ सक्रिय

विशेषता तुलना

पैरामीटर AD974ARS AD974BRSZ
ब्रांड Analog Devices Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति Obsolete सक्रिय
Number of Analog Input Channels 4 channels 4 channels
Input Configuration 4 single-ended analog inputs —
ADC Resolution 16 bit —
सैंपलिंग रेट 200 kSPS —
Conversion Architecture Successive-approximation switched-capacitor ADC —
Internal Reference Voltage +2.5 V 2.5 V
Reference Selection Internal or external 2.5 V reference —
Nominal Supply Voltage +5 V —
Supply Voltage Range 4.75 V to 5.25 V —
Analog Input Range 1 0 V to +4 V —
Analog Input Range 2 0 V to +5 V —
Analog Input Range 3 ±10 V —
Maximum Power Dissipation 120 mW —
इंटरफ़ेस प्रकार Serial —
Clock On-chip clock —
Power-Down Mode Supported Yes
पैकेज 28-pin SSOP 28-pin SSOP
माउंटिंग प्रकार Surface Mount Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Digital Interface Levels [DATA_NEEDED: digital interface voltage levels] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Product Type — 4-channel data-acquisition ADC
रेज़ोल्यूशन — 16 bit
Maximum Sampling Rate — 200 ksps
Converter Architecture — Successive-approximation switched-capacitor ADC
सप्लाई वोल्टेज — 5 V
Input Range 1 — 0 V to 4 V
Input Range 2 — 0 V to 5 V
Input Range 3 — -10 V to +10 V
Digital Interface — Serial interface
Analog Input Multiplexer — 4-channel internal multiplexer
Power Supply Count — 1
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Digital Input Logic Levels — [DATA_NEEDED: digital input logic levels]
Analog Input Input Impedance — [DATA_NEEDED: analog input impedance]
Total Unadjusted Error — [DATA_NEEDED: total unadjusted error]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
Differential Nonlinearity — [DATA_NEEDED: differential nonlinearity]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
Typical Power Dissipation — [DATA_NEEDED: typical power dissipation]
Power-Down Current — [DATA_NEEDED: power-down current]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध