AD974ARS vs AD974BRSZ Perbandingan
Perbandingan bersamaan detil AD974ARS dari Analog Devices dan AD974BRSZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | AD974ARS | AD974BRSZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Number of Analog Input Channels | 4 channels | 4 channels |
| Input Configuration | 4 single-ended analog inputs | — |
| ADC Resolution | 16 bit | — |
| Laju Pengambilan Sampel | 200 kSPS | — |
| Conversion Architecture | Successive-approximation switched-capacitor ADC | — |
| Internal Reference Voltage | +2.5 V | 2.5 V |
| Reference Selection | Internal or external 2.5 V reference | — |
| Nominal Supply Voltage | +5 V | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Analog Input Range 1 | 0 V to +4 V | — |
| Analog Input Range 2 | 0 V to +5 V | — |
| Analog Input Range 3 | ±10 V | — |
| Maximum Power Dissipation | 120 mW | — |
| Tipe Antarmuka | Serial | — |
| Clock | On-chip clock | — |
| Power-Down Mode | Supported | Yes |
| Paket | 28-pin SSOP | 28-pin SSOP |
| Tipe Mounting | Surface Mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Interface Levels | [DATA_NEEDED: digital interface voltage levels] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | 4-channel data-acquisition ADC |
| Resolusi | — | 16 bit |
| Maximum Sampling Rate | — | 200 ksps |
| Converter Architecture | — | Successive-approximation switched-capacitor ADC |
| Tegangan Pemuat | — | 5 V |
| Input Range 1 | — | 0 V to 4 V |
| Input Range 2 | — | 0 V to 5 V |
| Input Range 3 | — | -10 V to +10 V |
| Digital Interface | — | Serial interface |
| Analog Input Multiplexer | — | 4-channel internal multiplexer |
| Power Supply Count | — | 1 |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Digital Input Logic Levels | — | [DATA_NEEDED: digital input logic levels] |
| Analog Input Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| Total Unadjusted Error | — | [DATA_NEEDED: total unadjusted error] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Differential Nonlinearity | — | [DATA_NEEDED: differential nonlinearity] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: signal-to-noise ratio] |
| ENOB | — | [DATA_NEEDED: effective number of bits] |
| Typical Power Dissipation | — | [DATA_NEEDED: typical power dissipation] |
| Power-Down Current | — | [DATA_NEEDED: power-down current] |