AD974ARS vs AD974BRSZ Comparaison

Comparaison détaillée côte à côte de AD974ARS par Analog Devices et AD974BRSZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
AD974BRSZ AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ - 16-Bit 4-Channel ADC | Analog Devices

AD974BRSZ ✓ Actif

Comparaison des spécifications

Paramètre AD974ARS AD974BRSZ
Marque Analog Devices Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Obsolete Actif
Number of Analog Input Channels 4 channels 4 channels
Input Configuration 4 single-ended analog inputs —
ADC Resolution 16 bit —
Fréquence d'échantillonnage 200 kSPS —
Conversion Architecture Successive-approximation switched-capacitor ADC —
Internal Reference Voltage +2.5 V 2.5 V
Reference Selection Internal or external 2.5 V reference —
Nominal Supply Voltage +5 V —
Supply Voltage Range 4.75 V to 5.25 V —
Analog Input Range 1 0 V to +4 V —
Analog Input Range 2 0 V to +5 V —
Analog Input Range 3 ±10 V —
Maximum Power Dissipation 120 mW —
Type d'interface Serial —
Clock On-chip clock —
Power-Down Mode Supported Yes
Boîtier 28-pin SSOP 28-pin SSOP
Type de montage Surface Mount Surface mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Digital Interface Levels [DATA_NEEDED: digital interface voltage levels] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Product Type — 4-channel data-acquisition ADC
Résolution — 16 bit
Maximum Sampling Rate — 200 ksps
Converter Architecture — Successive-approximation switched-capacitor ADC
Tension d'alimentation — 5 V
Input Range 1 — 0 V to 4 V
Input Range 2 — 0 V to 5 V
Input Range 3 — -10 V to +10 V
Digital Interface — Serial interface
Analog Input Multiplexer — 4-channel internal multiplexer
Power Supply Count — 1
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Digital Input Logic Levels — [DATA_NEEDED: digital input logic levels]
Analog Input Input Impedance — [DATA_NEEDED: analog input impedance]
Total Unadjusted Error — [DATA_NEEDED: total unadjusted error]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
Differential Nonlinearity — [DATA_NEEDED: differential nonlinearity]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]
Typical Power Dissipation — [DATA_NEEDED: typical power dissipation]
Power-Down Current — [DATA_NEEDED: power-down current]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis