ADM2563EBRNZ vs ADM2561EBRNZ Comparison
Detailed side-by-side comparison of ADM2563EBRNZ by Analog Devices and ADM2561EBRNZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ ActiveSpecification Comparison
| Parameter | ADM2563EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $12.21 | $6.78 |
| Protocol | RS-422, RS-485 (full-duplex) | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers / Receivers | 1 / 1 | — |
| Data Rate | 25 Mbps | 25 Mbps |
| Isolation Voltage (RMS) | 3 kV (UL 1577 / IEC 61010-1) | — |
| VCC Supply Range | 3.0 V to 5.5 V | — |
| VIO Logic Supply Range | 1.7 V to 5.5 V | — |
| Isolated DC-DC Output (VISOOUT) | 3.3 V or 5 V selectable (VSEL) | — |
| IEC ESD (Bus Pins) | ±15 kV (IEC 61000-4-2, air / contact) | — |
| HBM ESD (Bus Pins) | ±25 kV | — |
| Common-Mode Range | −25 V to +25 V | — |
| Receiver Hysteresis | 30 mV | — |
| Quiescent Current (VCC, no load) | [DATA_NEEDED: quiescent current mA] | — |
| Operating Temperature Range | −40 °C to +85 °C | -40C to +105C |
| Package | 28-SOIC-W-FP (wide-body SOIC, exposed pad) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| RoHS Status | Compliant | Compliant |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Function | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| Mounting Type | — | Surface Mount |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |