ADM2563EBRNZ vs ADM2561EBRNZ Comparaison
Comparaison détaillée côte à côte de ADM2563EBRNZ par Analog Devices et ADM2561EBRNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ ActifComparaison des spécifications
| Paramètre | ADM2563EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $12,21 | $6,78 |
| Protocol | RS-422, RS-485 (full-duplex) | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers / Receivers | 1 / 1 | — |
| Débit de données | 25 Mbps | 25 Mbps |
| Isolation Voltage (RMS) | 3 kV (UL 1577 / IEC 61010-1) | — |
| VCC Supply Range | 3.0 V to 5.5 V | — |
| VIO Logic Supply Range | 1.7 V to 5.5 V | — |
| Isolated DC-DC Output (VISOOUT) | 3.3 V or 5 V selectable (VSEL) | — |
| IEC ESD (Bus Pins) | ±15 kV (IEC 61000-4-2, air / contact) | — |
| HBM ESD (Bus Pins) | ±25 kV | — |
| Common-Mode Range | −25 V to +25 V | — |
| Receiver Hysteresis | 30 mV | — |
| Quiescent Current (VCC, no load) | [DATA_NEEDED: quiescent current mA] | — |
| Plage de température de fonctionnement | −40 °C to +85 °C | -40C to +105C |
| Boîtier | 28-SOIC-W-FP (wide-body SOIC, exposed pad) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Statut RoHS | Compliant | Compliant |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Fonction | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| Type de montage | — | Surface Mount |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |