ADM2563EBRNZ vs ADM2561EBRNZ Comparação
Comparação detalhada lado a lado de ADM2563EBRNZ por Analog Devices e ADM2561EBRNZ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ AtivoComparação de especificações
| Parâmetro | ADM2563EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $12,21 | $6,78 |
| Protocol | RS-422, RS-485 (full-duplex) | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers / Receivers | 1 / 1 | — |
| Taxa de dados | 25 Mbps | 25 Mbps |
| Isolation Voltage (RMS) | 3 kV (UL 1577 / IEC 61010-1) | — |
| VCC Supply Range | 3.0 V to 5.5 V | — |
| VIO Logic Supply Range | 1.7 V to 5.5 V | — |
| Isolated DC-DC Output (VISOOUT) | 3.3 V or 5 V selectable (VSEL) | — |
| IEC ESD (Bus Pins) | ±15 kV (IEC 61000-4-2, air / contact) | — |
| HBM ESD (Bus Pins) | ±25 kV | — |
| Common-Mode Range | −25 V to +25 V | — |
| Receiver Hysteresis | 30 mV | — |
| Quiescent Current (VCC, no load) | [DATA_NEEDED: quiescent current mA] | — |
| Faixa de temperatura de operação | −40 °C to +85 °C | -40C to +105C |
| Encapsulamento | 28-SOIC-W-FP (wide-body SOIC, exposed pad) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Status RoHS | Compliant | Compliant |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Função | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| Tipo de montagem | — | Surface Mount |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |