ADM2563EBRNZ vs ADM2561EBRNZ Vergleich
Detaillierter Direktvergleich von ADM2563EBRNZ von Analog Devices und ADM2561EBRNZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2563EBRNZ - 3 kV Isolated RS-485 Transceiver, 28-SOIC-W-FP | Analog Devices
ADM2563EBRNZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM2563EBRNZ | ADM2561EBRNZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,21 | $6,78 |
| Protocol | RS-422, RS-485 (full-duplex) | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers / Receivers | 1 / 1 | — |
| Datenrate | 25 Mbps | 25 Mbps |
| Isolation Voltage (RMS) | 3 kV (UL 1577 / IEC 61010-1) | — |
| VCC Supply Range | 3.0 V to 5.5 V | — |
| VIO Logic Supply Range | 1.7 V to 5.5 V | — |
| Isolated DC-DC Output (VISOOUT) | 3.3 V or 5 V selectable (VSEL) | — |
| IEC ESD (Bus Pins) | ±15 kV (IEC 61000-4-2, air / contact) | — |
| HBM ESD (Bus Pins) | ±25 kV | — |
| Common-Mode Range | −25 V to +25 V | — |
| Receiver Hysteresis | 30 mV | — |
| Quiescent Current (VCC, no load) | [DATA_NEEDED: quiescent current mA] | — |
| Betriebstemperaturbereich | −40 °C to +85 °C | -40C to +105C |
| Gehäuse | 28-SOIC-W-FP (wide-body SOIC, exposed pad) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| RoHS-Status | Compliant | Compliant |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Funktion | — | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Number of Drivers/Receivers | — | 2/2 |
| Duplex | — | Full / Half |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Hot-Swap Tolerant | — | Yes |
| Montageart | — | Surface Mount |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |