ADM488ANZ vs MAX3488EPA+ Comparison

Detailed side-by-side comparison of ADM488ANZ by Analog Devices and MAX3488EPA+ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Analog Devices
ADM488ANZ ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ ✓ Active
Analog Devices
MAX3488EPA+ MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ ✓ Active

Specification Comparison

Parameter ADM488ANZ MAX3488EPA+
Brand Analog Devices Analog Devices
Category Interface ICs Interface ICs
Lifecycle Status Active Active
Product Type Full-duplex differential transceiver RS-485/RS-422 transceiver
Supported Protocols EIA RS-422 and EIA RS-485 —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Maximum Data Rate 250 kbps —
Supply Voltage Range 4.5 V to 5.5 V 3.0 V to 3.6 V
Operating Mode Full duplex —
Driver Output Characteristics Slew-rate limited —
Power Class Low power —
Package 8-PDIP (0.300 inch, 7.62 mm pitch) 8-pin PDIP
Mounting Type Through-hole PDIP Through-hole
Packaging Tube —
Operating Temperature Range [DATA_NEEDED: operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Maximum Bus Load [DATA_NEEDED: maximum bus load] —
ESD Protection Level [DATA_NEEDED: ESD protection rating] —
Supply Current [DATA_NEEDED: supply current] —
RoHS Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Supply Voltage — 3.3 V
Data Rate — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Standards — RS-422 and RS-485
Slew-Rate Limiting — Yes
Operating Temperature — [DATA_NEEDED: operating temperature range]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Differential Input Voltage — [DATA_NEEDED: differential input voltage]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Supply Current — [DATA_NEEDED: receiver supply current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Termination — External termination required according to bus design

Datasheets & Resources

Browse All Products Create BOM Request Quote