ADM488ANZ vs MAX3488EPA+ So sánh

So sánh chi tiết song song của ADM488ANZ bằng Analog Devices và MAX3488EPA+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM488ANZ ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ ✓ Hoạt động
Analog Devices
MAX3488EPA+ MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM488ANZ MAX3488EPA+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Full-duplex differential transceiver RS-485/RS-422 transceiver
Supported Protocols EIA RS-422 and EIA RS-485 —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Maximum Data Rate 250 kbps —
Supply Voltage Range 4.5 V to 5.5 V 3.0 V to 3.6 V
Operating Mode Full duplex —
Driver Output Characteristics Slew-rate limited —
Power Class Low power —
Hộp 8-PDIP (0.300 inch, 7.62 mm pitch) 8-pin PDIP
Kiểu lắp đặt Through-hole PDIP Through-hole
Packaging Tube —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Maximum Bus Load [DATA_NEEDED: maximum bus load] —
ESD Protection Level [DATA_NEEDED: ESD protection rating] —
Điện áp cung cấp [DATA_NEEDED: supply current] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Điện áp cung cấp — 3.3 V
Tốc độ dữ liệu — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Standards — RS-422 and RS-485
Slew-Rate Limiting — Yes
Nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Differential Input Voltage — [DATA_NEEDED: differential input voltage]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Supply Current — [DATA_NEEDED: receiver supply current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Termination — External termination required according to bus design

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá