ADM488ANZ vs MAX3488EPA+ तुलना

विस्तृत दोनों ओर की तुलना ADM488ANZ द्वारा Analog Devices और MAX3488EPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM488ANZ ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ - 250 kbps RS-485 Transceiver | Analog Devices

ADM488ANZ ✓ सक्रिय
Analog Devices
MAX3488EPA+ MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3488EPA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM488ANZ MAX3488EPA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Full-duplex differential transceiver RS-485/RS-422 transceiver
Supported Protocols EIA RS-422 and EIA RS-485 —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Maximum Data Rate 250 kbps —
Supply Voltage Range 4.5 V to 5.5 V 3.0 V to 3.6 V
Operating Mode Full duplex —
Driver Output Characteristics Slew-rate limited —
Power Class Low power —
पैकेज 8-PDIP (0.300 inch, 7.62 mm pitch) 8-pin PDIP
माउंटिंग प्रकार Through-hole PDIP Through-hole
Packaging Tube —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
Maximum Bus Load [DATA_NEEDED: maximum bus load] —
ESD Protection Level [DATA_NEEDED: ESD protection rating] —
सप्लाई करंट [DATA_NEEDED: supply current] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
सप्लाई वोल्टेज — 3.3 V
डेटा दर — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Standards — RS-422 and RS-485
Slew-Rate Limiting — Yes
ऑपरेटिंग तापमान — [DATA_NEEDED: operating temperature range]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Differential Input Voltage — [DATA_NEEDED: differential input voltage]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Supply Current — [DATA_NEEDED: receiver supply current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Termination — External termination required according to bus design

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध