ADM488ANZ vs MAX3488EPA+ 비교
다음의 상세 나란히 비교: ADM488ANZ 제조: Analog Devices 및 MAX3488EPA+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | ADM488ANZ | MAX3488EPA+ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Full-duplex differential transceiver | RS-485/RS-422 transceiver |
| Supported Protocols | EIA RS-422 and EIA RS-485 | — |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 3.0 V to 3.6 V |
| Operating Mode | Full duplex | — |
| Driver Output Characteristics | Slew-rate limited | — |
| Power Class | Low power | — |
| 패키지 | 8-PDIP (0.300 inch, 7.62 mm pitch) | 8-pin PDIP |
| 실장 유형 | Through-hole PDIP | Through-hole |
| Packaging | Tube | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Maximum Bus Load | [DATA_NEEDED: maximum bus load] | — |
| ESD Protection Level | [DATA_NEEDED: ESD protection rating] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 공급 전압 | — | 3.3 V |
| 데이터 속도 | — | 10 Mbps |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Standards | — | RS-422 and RS-485 |
| Slew-Rate Limiting | — | Yes |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Termination | — | External termination required according to bus design |