BTG70902EPLXUMA1 vs BTS710336ESAXUMA1 Comparison
Detailed side-by-side comparison of BTG70902EPLXUMA1 by Infineon and BTS710336ESAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTG70902EPLXUMA1
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 β Active
Specification Comparison
| Parameter | BTG70902EPLXUMA1 | BTS710336ESAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.99 | $2.45 |
| Product Family | PROFET+2 12V | β |
| Function | Smart High-Side Power Switch | β |
| Number of Channels | 1 | 6 (4 x 1.5 A + 2 x 3 A) |
| Input-to-Output Ratio | 1:1 | β |
| Output Configuration | N-Channel High-Side | β |
| Continuous Load Current | 2 A | β |
| Nominal Operating Voltage | 12 V (automotive bus) | β |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | β |
| Current Limit | Fixed (value not specified in retrieved data) | β |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | β |
| Diagnostic Output | DEN pin (current sense / fault flag) | β |
| Enable Input | IN pin (active-high) | β |
| Channel Select | DSEL pin | β |
| Slew Rate Control | Yes (internal, for EMI) | β |
| Package | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) |
| Operating Junction Temperature | -40 C to +150 C | β |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | β |
| RoHS Status | Compliant | Compliant |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | β |
| Product Type | β | SPI high-side power switch (SPOC+2 family) |
| On-State Resistance (1.5 A channels) | β | 70 mOhm (typical) |
| On-State Resistance (3 A channels) | β | 22.5 mOhm (typical) |
| Maximum Channel Current (1.5 A channels) | β | 1.5 A |
| Maximum Channel Current (3 A channels) | β | 3 A |
| Logic Interface | β | SPI (daisy-chain capable, 3.3 V and 5 V compatible) |
| Diagnosis | β | Open-load, short-to-battery, short-to-ground, overtemperature, overload |
| Protection Functions | β | Overload, short-circuit, overtemperature, overvoltage |
| Technology | β | SMART7 (SMART power) |
| Operating Temperature Range | β | -40C to +150C (Tj) |
| Family | β | SPOC+2 |