BTG70902EPLXUMA1 vs BTS710336ESAXUMA1 Vergleich
Detaillierter Direktvergleich von BTG70902EPLXUMA1 von Infineon und BTS710336ESAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ Aktiv
Spezifikationsvergleich
| Parameter | BTG70902EPLXUMA1 | BTS710336ESAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,99 | $2,45 |
| Product Family | PROFET+2 12V | — |
| Funktion | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 6 (4 x 1.5 A + 2 x 3 A) |
| Input-to-Output Ratio | 1:1 | — |
| Ausgangskonfiguration | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Strombegrenzung | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) |
| Betriebs-Sperrschichttemperatur | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| RoHS-Status | Compliant | Compliant |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Product Type | — | SPI high-side power switch (SPOC+2 family) |
| On-State Resistance (1.5 A channels) | — | 70 mOhm (typical) |
| On-State Resistance (3 A channels) | — | 22.5 mOhm (typical) |
| Maximum Channel Current (1.5 A channels) | — | 1.5 A |
| Maximum Channel Current (3 A channels) | — | 3 A |
| Logic Interface | — | SPI (daisy-chain capable, 3.3 V and 5 V compatible) |
| Diagnosis | — | Open-load, short-to-battery, short-to-ground, overtemperature, overload |
| Protection Functions | — | Overload, short-circuit, overtemperature, overvoltage |
| Technology | — | SMART7 (SMART power) |
| Betriebstemperaturbereich | — | -40C to +150C (Tj) |
| Family | — | SPOC+2 |