BTG70902EPLXUMA1 vs BTS710336ESAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTG70902EPLXUMA1 par Infineon et BTS710336ESAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ Actif
Comparaison des spécifications
| Paramètre | BTG70902EPLXUMA1 | BTS710336ESAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,99 | $2,45 |
| Product Family | PROFET+2 12V | — |
| Fonction | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 6 (4 x 1.5 A + 2 x 3 A) |
| Input-to-Output Ratio | 1:1 | — |
| Configuration de sortie | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Limitation de courant | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) |
| Température de jonction en fonctionnement | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Product Type | — | SPI high-side power switch (SPOC+2 family) |
| On-State Resistance (1.5 A channels) | — | 70 mOhm (typical) |
| On-State Resistance (3 A channels) | — | 22.5 mOhm (typical) |
| Maximum Channel Current (1.5 A channels) | — | 1.5 A |
| Maximum Channel Current (3 A channels) | — | 3 A |
| Logic Interface | — | SPI (daisy-chain capable, 3.3 V and 5 V compatible) |
| Diagnosis | — | Open-load, short-to-battery, short-to-ground, overtemperature, overload |
| Protection Functions | — | Overload, short-circuit, overtemperature, overvoltage |
| Technology | — | SMART7 (SMART power) |
| Plage de température de fonctionnement | — | -40C to +150C (Tj) |
| Family | — | SPOC+2 |