BTG70902EPLXUMA1 vs BTS710336ESAXUMA1 Comparação
Comparação detalhada lado a lado de BTG70902EPLXUMA1 por Infineon e BTS710336ESAXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ Ativo
Comparação de especificações
| Parâmetro | BTG70902EPLXUMA1 | BTS710336ESAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,99 | $2,45 |
| Product Family | PROFET+2 12V | — |
| Função | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 6 (4 x 1.5 A + 2 x 3 A) |
| Input-to-Output Ratio | 1:1 | — |
| Configuração de saída | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | [DATA_NEEDED: Vbb operating range] |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Limitação de corrente | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | — |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) |
| Temperatura de junção de operação | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| Status RoHS | Compliant | Compliant |
| Tipo de montagem | Surface Mount | Surface Mount |
| Nível MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Product Type | — | SPI high-side power switch (SPOC+2 family) |
| On-State Resistance (1.5 A channels) | — | 70 mOhm (typical) |
| On-State Resistance (3 A channels) | — | 22.5 mOhm (typical) |
| Maximum Channel Current (1.5 A channels) | — | 1.5 A |
| Maximum Channel Current (3 A channels) | — | 3 A |
| Logic Interface | — | SPI (daisy-chain capable, 3.3 V and 5 V compatible) |
| Diagnosis | — | Open-load, short-to-battery, short-to-ground, overtemperature, overload |
| Protection Functions | — | Overload, short-circuit, overtemperature, overvoltage |
| Technology | — | SMART7 (SMART power) |
| Faixa de temperatura de operação | — | -40C to +150C (Tj) |
| Family | — | SPOC+2 |