BTS70402EPGXUMA1 vs BTG70501EPLXUMA1 So sánh

So sánh chi tiết song song của BTS70402EPGXUMA1 bằng Infineon và BTG70501EPLXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ Hoạt động
Infineon
BTG70501EPLXUMA1 BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số BTS70402EPGXUMA1 BTG70501EPLXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Manufacturer Infineon Technologies —
Part Family PROFET+2 (BTS70xxx series) —
Chức năng Smart High-Side Power Switch —
Number of Channels 4 1
Cấu hình đầu ra High-side, N-channel MOSFET N-Channel High-Side
Continuous Load Current per Channel 3.5 A (typical) —
On-State Resistance (Ron) per Channel 65 mOhm typical —
Operating Voltage Range 6 V to 18 V nominal (load-dump tolerant to 40 V) —
Logic Supply Voltage 3.3 V / 5 V compatible MCU I/O —
Protection Features Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection —
Diagnostic Interface SPI status register, current-sense feedback —
Khoảng nhiệt độ hoạt động -40 °C to +150 °C junction —
Hộp PG-TSDSO-14 (exposed thermal pad) PG-TSDSO-14 (14-pin TSSOP with exposed pad)
Kiểu lắp đặt Surface Mount Surface Mount
AEC-Q100 Qualification Qualified (automotive grade) —
RoHS Compliance Compliant —
Switch Type — High-Side Power Switch (PROFET +2 12V)
Input / Output Ratio — 1:1
Current Limit (Typ.) — 3 A
Supply Voltage Vcc Range — 2.7 V to 28 V
Load-Dump Withstand — [DATA_NEEDED: load-dump transient rating]
On-State Resistance (Typ) — [DATA_NEEDED: Rdson value]
Operating Temperature (Tj) — -40 C to +150 C
Diagnostic Functions — Open-load, short-to-GND, short-to-Vbat, overtemperature
Current Limit Switch (CLS) Mode — Yes (for ADAS / power distribution)
Qualification — AEC-Q100 (automotive)
Cấp MSL — [DATA_NEEDED: MSL rating]
Trạng thái RoHS — Compliant
Lead-Free — Yes

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá