BTS70402EPGXUMA1 vs BTG70501EPLXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS70402EPGXUMA1 द्वारा Infineon और BTG70501EPLXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय
Infineon
BTG70501EPLXUMA1 BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 - 3A Smart High-Side Switch | Infineon PROFET

BTG70501EPLXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS70402EPGXUMA1 BTG70501EPLXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Part Family PROFET+2 (BTS70xxx series) —
फ़ंक्शन Smart High-Side Power Switch —
Number of Channels 4 1
आउटपुट कॉन्फ़िगरेशन High-side, N-channel MOSFET N-Channel High-Side
Continuous Load Current per Channel 3.5 A (typical) —
On-State Resistance (Ron) per Channel 65 mOhm typical —
Operating Voltage Range 6 V to 18 V nominal (load-dump tolerant to 40 V) —
Logic Supply Voltage 3.3 V / 5 V compatible MCU I/O —
Protection Features Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection —
Diagnostic Interface SPI status register, current-sense feedback —
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C junction —
पैकेज PG-TSDSO-14 (exposed thermal pad) PG-TSDSO-14 (14-pin TSSOP with exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
AEC-Q100 Qualification Qualified (automotive grade) —
RoHS Compliance Compliant —
Switch Type — High-Side Power Switch (PROFET +2 12V)
Input / Output Ratio — 1:1
Current Limit (Typ.) — 3 A
Supply Voltage Vcc Range — 2.7 V to 28 V
Load-Dump Withstand — [DATA_NEEDED: load-dump transient rating]
On-State Resistance (Typ) — [DATA_NEEDED: Rdson value]
Operating Temperature (Tj) — -40 C to +150 C
Diagnostic Functions — Open-load, short-to-GND, short-to-Vbat, overtemperature
Current Limit Switch (CLS) Mode — Yes (for ADAS / power distribution)
Qualification — AEC-Q100 (automotive)
MSL स्तर — [DATA_NEEDED: MSL rating]
RoHS स्थिति — Compliant
Lead-Free — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध