CD4052BCM vs CD4052BE Comparison
Detailed side-by-side comparison of CD4052BCM by onsemi and CD4052BE by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | CD4052BCM | CD4052BE |
|---|---|---|
| Brand | onsemi | Texas Instruments |
| Category | Interface ICs | Logic ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual 4:1 analog multiplexer and demultiplexer | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Circuits | 2 circuits | — |
| On Resistance | 240 ohms | — |
| Number of Pins | 16 pins | — |
| Package | 16-pin SOIC | 16-pin PDIP |
| Mounting Type | Surface mount | Through-hole |
| Supply Voltage Range | 3 V to 18 V | 3 V to 20 V |
| Absolute Maximum DC Supply Voltage | -0.5 V to +18 V | — |
| Absolute Maximum Input Voltage | -0.5 V to VDD + 0.5 V | — |
| Storage Temperature Range | -65 C to +150 C | — |
| Power Dissipation | 700 mW | — |
| Control Inputs | A, B, C and Inhibit | — |
| Channel Configuration | 4:1 analog multiplexing and demultiplexing | — |
| Logic Family | CD4000 CMOS series | — |
| Commercial Grade | C suffix commercial temperature grade | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Logic-Level Conversion | — | Supported |
| Operating Temperature | — | [DATA_NEEDED: operating temperature range] |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |