CD4052BCM vs CD4052BE Perbandingan
Perbandingan bersamaan detil CD4052BCM dari onsemi dan CD4052BE dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | CD4052BCM | CD4052BE |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Interface ICs | Logic ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Dual 4:1 analog multiplexer and demultiplexer | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Circuits | 2 circuits | — |
| On Resistance | 240 ohms | — |
| Jumlah Pin | 16 pins | — |
| Paket | 16-pin SOIC | 16-pin PDIP |
| Tipe Mounting | Surface mount | Through-hole |
| Supply Voltage Range | 3 V to 18 V | 3 V to 20 V |
| Absolute Maximum DC Supply Voltage | -0.5 V to +18 V | — |
| Absolute Maximum Input Voltage | -0.5 V to VDD + 0.5 V | — |
| Storage Temperature Range | -65 C to +150 C | — |
| Power Dissipation | 700 mW | — |
| Control Inputs | A, B, C and Inhibit | — |
| Channel Configuration | 4:1 analog multiplexing and demultiplexing | — |
| Logic Family | CD4000 CMOS series | — |
| Commercial Grade | C suffix commercial temperature grade | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Logic-Level Conversion | — | Supported |
| Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |