CD4052BCM vs CD4052BE Karşılaştırma
Ayrıntılı yan yana karşılaştırma CD4052BCM tarafından onsemi ve CD4052BE tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | CD4052BCM | CD4052BE |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Interface ICs | Logic ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Dual 4:1 analog multiplexer and demultiplexer | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Circuits | 2 circuits | — |
| On Resistance | 240 ohms | — |
| Pin Sayısı | 16 pins | — |
| Paket | 16-pin SOIC | 16-pin PDIP |
| Montaj Türü | Surface mount | Through-hole |
| Supply Voltage Range | 3 V to 18 V | 3 V to 20 V |
| Absolute Maximum DC Supply Voltage | -0.5 V to +18 V | — |
| Absolute Maximum Input Voltage | -0.5 V to VDD + 0.5 V | — |
| Storage Temperature Range | -65 C to +150 C | — |
| Power Dissipation | 700 mW | — |
| Control Inputs | A, B, C and Inhibit | — |
| Channel Configuration | 4:1 analog multiplexing and demultiplexing | — |
| Logic Family | CD4000 CMOS series | — |
| Commercial Grade | C suffix commercial temperature grade | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Logic-Level Conversion | — | Supported |
| İşletim Sıcaklığı | — | [DATA_NEEDED: operating temperature range] |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |