CD4052BCM vs CD4052BE Comparación
Comparación detallada lado a lado de CD4052BCM por onsemi y CD4052BE por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | CD4052BCM | CD4052BE |
|---|---|---|
| Marca | onsemi | Texas Instruments |
| Categoría | Interface ICs | Logic ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Dual 4:1 analog multiplexer and demultiplexer | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Circuits | 2 circuits | — |
| On Resistance | 240 ohms | — |
| Número de pines | 16 pins | — |
| Encapsulado | 16-pin SOIC | 16-pin PDIP |
| Tipo de montaje | Surface mount | Through-hole |
| Supply Voltage Range | 3 V to 18 V | 3 V to 20 V |
| Absolute Maximum DC Supply Voltage | -0.5 V to +18 V | — |
| Absolute Maximum Input Voltage | -0.5 V to VDD + 0.5 V | — |
| Storage Temperature Range | -65 C to +150 C | — |
| Power Dissipation | 700 mW | — |
| Control Inputs | A, B, C and Inhibit | — |
| Channel Configuration | 4:1 analog multiplexing and demultiplexing | — |
| Logic Family | CD4000 CMOS series | — |
| Commercial Grade | C suffix commercial temperature grade | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Logic-Level Conversion | — | Supported |
| Temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |