CD4052BPWR vs CD4052BE Comparison
Detailed side-by-side comparison of CD4052BPWR by Texas Instruments and CD4052BE by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
CD4052BPWR - 4:1 Differential Analog Mux 240 Ohm | Texas Instruments
CD4052BPWR ✓ Active
Specification Comparison
| Parameter | CD4052BPWR | CD4052BE |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Logic ICs | Logic ICs |
| Lifecycle Status | Active | Active |
| Function | Differential 4:1 analog multiplexer/demultiplexer | — |
| Number of Circuits | 2 | — |
| Channels | 4:1 per circuit | — |
| ON Resistance (typ) | 240 ohm | — |
| Supply Voltage Range | 3 V to 20 V | 3 V to 20 V |
| Absolute Maximum Supply | 20 V | — |
| Control Inputs | A, B (binary) + INH (inhibit) | — |
| Logic-Level Conversion | Yes, via VEE pin | Supported |
| OFF Leakage Current | Very low (nA typ) | — |
| Signal Range | Full supply rail-to-rail (VEE to VDD) | — |
| Technology | CMOS | — |
| Operating Temperature | -55C to +125C | [DATA_NEEDED: operating temperature range] |
| Package | TSSOP-16 (PW) | 16-pin PDIP |
| Mounting Type | Surface Mount | Through-hole |
| Package Height | 1.20 mm | — |
| Lead Pitch | 0.65 mm | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |