CD4052BPWR vs CD4052BE مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ CD4052BPWR بواسطة Texas Instruments و CD4052BE بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
CD4052BPWR - 4:1 Differential Analog Mux 240 Ohm | Texas Instruments
CD4052BPWR ✓ نشط
مقارنة المواصفات
| المعامل | CD4052BPWR | CD4052BE |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Logic ICs | Logic ICs |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | Differential 4:1 analog multiplexer/demultiplexer | — |
| Number of Circuits | 2 | — |
| القنوات | 4:1 per circuit | — |
| ON Resistance (typ) | 240 ohm | — |
| Supply Voltage Range | 3 V to 20 V | 3 V to 20 V |
| Absolute Maximum Supply | 20 V | — |
| Control Inputs | A, B (binary) + INH (inhibit) | — |
| Logic-Level Conversion | Yes, via VEE pin | Supported |
| OFF Leakage Current | Very low (nA typ) | — |
| Signal Range | Full supply rail-to-rail (VEE to VDD) | — |
| Technology | CMOS | — |
| درجة حرارة التشغيل | -55C to +125C | [DATA_NEEDED: operating temperature range] |
| العلبة | TSSOP-16 (PW) | 16-pin PDIP |
| نوع التركيب | Surface Mount | Through-hole |
| Package Height | 1.20 mm | — |
| Lead Pitch | 0.65 mm | — |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |