CD4052BPWR vs CD4052BE Perbandingan
Perbandingan bersamaan detil CD4052BPWR dari Texas Instruments dan CD4052BE dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
CD4052BPWR - 4:1 Differential Analog Mux 240 Ohm | Texas Instruments
CD4052BPWR ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | CD4052BPWR | CD4052BE |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Logic ICs | Logic ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Differential 4:1 analog multiplexer/demultiplexer | — |
| Number of Circuits | 2 | — |
| Kanal | 4:1 per circuit | — |
| ON Resistance (typ) | 240 ohm | — |
| Supply Voltage Range | 3 V to 20 V | 3 V to 20 V |
| Absolute Maximum Supply | 20 V | — |
| Control Inputs | A, B (binary) + INH (inhibit) | — |
| Logic-Level Conversion | Yes, via VEE pin | Supported |
| OFF Leakage Current | Very low (nA typ) | — |
| Signal Range | Full supply rail-to-rail (VEE to VDD) | — |
| Technology | CMOS | — |
| Suhu Kerja | -55C to +125C | [DATA_NEEDED: operating temperature range] |
| Paket | TSSOP-16 (PW) | 16-pin PDIP |
| Tipe Mounting | Surface Mount | Through-hole |
| Package Height | 1.20 mm | — |
| Lead Pitch | 0.65 mm | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |