CD4052BPWR vs CD4052BE Comparaison
Comparaison détaillée côte à côte de CD4052BPWR par Texas Instruments et CD4052BE par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
CD4052BPWR - 4:1 Differential Analog Mux 240 Ohm | Texas Instruments
CD4052BPWR ✓ Actif
Comparaison des spécifications
| Paramètre | CD4052BPWR | CD4052BE |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Logic ICs | Logic ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Differential 4:1 analog multiplexer/demultiplexer | — |
| Number of Circuits | 2 | — |
| Canaux | 4:1 per circuit | — |
| ON Resistance (typ) | 240 ohm | — |
| Supply Voltage Range | 3 V to 20 V | 3 V to 20 V |
| Absolute Maximum Supply | 20 V | — |
| Control Inputs | A, B (binary) + INH (inhibit) | — |
| Logic-Level Conversion | Yes, via VEE pin | Supported |
| OFF Leakage Current | Very low (nA typ) | — |
| Signal Range | Full supply rail-to-rail (VEE to VDD) | — |
| Technology | CMOS | — |
| Température de fonctionnement | -55C to +125C | [DATA_NEEDED: operating temperature range] |
| Boîtier | TSSOP-16 (PW) | 16-pin PDIP |
| Type de montage | Surface Mount | Through-hole |
| Package Height | 1.20 mm | — |
| Lead Pitch | 0.65 mm | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual 4:1 analog multiplexer/demultiplexer |
| Number of Multiplexer Channels | — | 2 |
| Configuration | — | 4:1 |
| Maximum Supply Voltage | — | 20 V |
| Digital Signal Level Range | — | 3 V to 20 V |
| Typical On-Resistance | — | 240 ohm |
| On-Resistance at 15 V Peak-to-Peak | — | 125 ohm typical |
| Off Leakage Current | — | Very low; specific value not supplied |
| Address Decoding | — | Binary address decoding on chip |
| Analog Signal Range | — | [DATA_NEEDED: analog signal voltage range] |
| Leakage Current | — | [DATA_NEEDED: leakage current at specified test conditions] |
| Switching Time | — | [DATA_NEEDED: switching time] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |