DRV8886PWPR vs DRV8434ARGER Comparison
Detailed side-by-side comparison of DRV8886PWPR by Texas Instruments and DRV8434ARGER by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | DRV8886PWPR | DRV8434ARGER |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.52 | $2.65 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar stepper |
| Number of Full H-Bridges | 2 | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.5 A per phase (typical) |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mOhm | — |
| Microstepping Levels | Up to 1/16 step | — |
| Control Interface | STEP / DIR | Step/Direction + SPI |
| Current Sensing | Internal (no external sense resistor) | Integrated (no external sense resistor) |
| Decay Modes | 8 configurable modes including Smart Tune | — |
| PWM Chopping Frequency | Up to 50 kHz | — |
| Sleep Current | 20 uA (typical) | — |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Package | HTSSOP-24 (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Mounting Type | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | UVLO, OCP, OVP, OTP, open load, stall |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| RoHS Status | Compliant | Compliant |
| Number of H-Bridges | — | 2 |
| Output Configuration | — | NMOS H-bridge |
| Supply Voltage (VM) | — | 4.5 V to 48 V |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Operating Temperature | — | -40 C to +125 C |
| MSL Level | — | 2 (1 year floor life) |