DRV8886PWPR vs DRV8434ARGER Сравнение
Подробное сравнение бок о бок DRV8886PWPR от Texas Instruments и DRV8434ARGER от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI
DRV8434ARGER ✓ АктивенСравнение характеристик
| Параметр | DRV8886PWPR | DRV8434ARGER |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Motor Drivers | Motor Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,52 | $2,65 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar stepper |
| Number of Full H-Bridges | 2 | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.5 A per phase (typical) |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mOhm | — |
| Microstepping Levels | Up to 1/16 step | — |
| Control Interface | STEP / DIR | Step/Direction + SPI |
| Current Sensing | Internal (no external sense resistor) | Integrated (no external sense resistor) |
| Decay Modes | 8 configurable modes including Smart Tune | — |
| PWM Chopping Frequency | Up to 50 kHz | — |
| Sleep Current | 20 uA (typical) | — |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Диапазон рабочих температур | -40 C to +125 C | — |
| Корпус | HTSSOP-24 (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Тип монтажа | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | UVLO, OCP, OVP, OTP, open load, stall |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| Статус RoHS | Compliant | Compliant |
| Number of H-Bridges | — | 2 |
| Выходная конфигурация | — | NMOS H-bridge |
| Supply Voltage (VM) | — | 4.5 V to 48 V |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Рабочая температура | — | -40 C to +125 C |
| Уровень MSL | — | 2 (1 year floor life) |