DRV8886PWPR vs DRV8434ARGER Vergleich
Detaillierter Direktvergleich von DRV8886PWPR von Texas Instruments und DRV8434ARGER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | DRV8886PWPR | DRV8434ARGER |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,52 | $2,65 |
| Motor Type | Bipolar stepper (2-phase) | Bipolar stepper |
| Number of Full H-Bridges | 2 | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Absolute Maximum VM | 40 V | — |
| Full-Scale Output Current (per phase) | 2 A | — |
| RMS Output Current | 1.4 A (24 V, TA = 25 C, PCB-dependent) | 1.5 A per phase (typical) |
| Peak Output Current | 3 A | — |
| HS + LS On-Resistance (RDSon) | 550 mOhm | — |
| Microstepping Levels | Up to 1/16 step | — |
| Control Interface | STEP / DIR | Step/Direction + SPI |
| Current Sensing | Internal (no external sense resistor) | Integrated (no external sense resistor) |
| Decay Modes | 8 configurable modes including Smart Tune | — |
| PWM Chopping Frequency | Up to 50 kHz | — |
| Sleep Current | 20 uA (typical) | — |
| Logic Supply Voltage (VINT) | 3 V to 5.5 V | — |
| Betriebstemperaturbereich | -40 C to +125 C | — |
| Gehäuse | HTSSOP-24 (PWP) with PowerPAD | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Montageart | Surface Mount | Surface Mount |
| Protection Features | UVLO, OCP, TSD, open-load detect, charge-pump UV | UVLO, OCP, OVP, OTP, open load, stall |
| Fault Output | nFAULT (active-low, open-drain) | — |
| AEC-Q100 Qualified | No (use DRV8886ATPWP for automotive) | — |
| RoHS-Status | Compliant | Compliant |
| Number of H-Bridges | — | 2 |
| Ausgangskonfiguration | — | NMOS H-bridge |
| Supply Voltage (VM) | — | 4.5 V to 48 V |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| Microstepping Resolution | — | Full-step to 1/256 step |
| Stall Detection | — | Yes (GPIO output) |
| Decay Mode | — | Smart Tune (mixed decay) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Betriebstemperatur | — | -40 C to +125 C |
| MSL-Level | — | 2 (1 year floor life) |