DRV8886PWPR vs DRV8434ARGER 对比

详细并排对比 DRV8886PWPR 出自 Texas Instruments 和 DRV8434ARGER 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。

Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ 量产中
Texas Instruments
DRV8434ARGER DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER - 48V 2.5A Stepper Driver w/ Stall Detect | TI

DRV8434ARGER ✓ 量产中

规格对比

参数 DRV8886PWPR DRV8434ARGER
品牌 Texas Instruments Texas Instruments
分类 Motor Drivers Motor Drivers
生命周期状态 有效 有效
库存状态 有库存 有库存
单价(USD) $1.52 $2.65
Motor Type Bipolar stepper (2-phase) Bipolar stepper
Number of Full H-Bridges 2 —
Operating Supply Voltage (VM) 8 V to 37 V —
Absolute Maximum VM 40 V —
Full-Scale Output Current (per phase) 2 A —
RMS Output Current 1.4 A (24 V, TA = 25 C, PCB-dependent) 1.5 A per phase (typical)
Peak Output Current 3 A —
HS + LS On-Resistance (RDSon) 550 mOhm —
Microstepping Levels Up to 1/16 step —
Control Interface STEP / DIR Step/Direction + SPI
Current Sensing Internal (no external sense resistor) Integrated (no external sense resistor)
Decay Modes 8 configurable modes including Smart Tune —
PWM Chopping Frequency Up to 50 kHz —
Sleep Current 20 uA (typical) —
Logic Supply Voltage (VINT) 3 V to 5.5 V —
工作温度范围 -40 C to +125 C —
封装 HTSSOP-24 (PWP) with PowerPAD VQFN-24 (RGE) 4x4 mm with thermal pad
安装类型 Surface Mount Surface Mount
Protection Features UVLO, OCP, TSD, open-load detect, charge-pump UV UVLO, OCP, OVP, OTP, open load, stall
Fault Output nFAULT (active-low, open-drain) —
AEC-Q100 Qualified No (use DRV8886ATPWP for automotive) —
RoHS 状态 Compliant Compliant
Number of H-Bridges — 2
输出配置 — NMOS H-bridge
Supply Voltage (VM) — 4.5 V to 48 V
Full-Scale Output Current — 2.5 A per phase (peak)
Microstepping Resolution — Full-step to 1/256 step
Stall Detection — Yes (GPIO output)
Decay Mode — Smart Tune (mixed decay)
Sleep Pin — Yes (nSLEEP, active low)
Fault Pin — Yes (nFAULT, active low, open-drain)
工作温度 — -40 C to +125 C
MSL 等级 — 2 (1 year floor life)

数据手册与资源

浏览全部产品 创建 BOM 获取报价